Hey Guys-- Sorry for the delay getting this out there. I finally found the documentation package I had put together back in 2010 and it's now on my GDrive here,
https://drive.google.com/folderview?id=0B6A73VHTVh23MS1MVERNcUZkd1U The photos are of the 10-hole punch. We also did a 16-hole as Dwight has mentioned and he as a few of those still available. Dwight, I double checked the metal and we're both mis-remembering. It's not aluminum or stainless but just tool steel that Russ polished. You can stick a magnet to it. Therefore, probably keep these out of the humidity or they will rust. I also put the latest copy of the user instructions along with photos. We may have updated that document later but this was the only copy I could find here. Chris On Friday (10/16/2015 at 01:00PM -0500), Chris Elmquist wrote: > On Friday (10/16/2015 at 08:53AM -0700), Chris Osborn wrote: > > > > On Oct 16, 2015, at 8:18 AM, dwight <dkel...@hotmail.com> wrote: > > > > > I do still have some 16 hole 5-1/4 punches left. ( anyone want one? ) > > > > I’d love to see a picture of one just to see how it was made and how it > > clamps to the disk. > > I will take some photos later today and round up some of the documentation > we had for them and then send another note with links to same. > > Chris > -- > Chris Elmquist -- Chris Elmquist
