[Bacula-users] btape fill error

the device incorrectly and was seeing if that made a difference. Any help here is appreciated, Thanks! -- Tom Plancon CAD/IS Manager BKA Architects, Inc. 142 Crescent St. Brockton, MA 02302 508-583-5603 [EMAIL PROTECTED] -

[Bacula-users] btape fill error

uot;fill" error occured when attempting a "m" session also. The error above shows "DDS-4", I've gotten the same error when I had the device listed as "DAT-72" in the config files, I just changed it because I thought I was identifying the device incorrectly an

[Bacula-users] scsi tape and btape problems

c:284 discovery of data overrun. Buffer address: 57c620 Damaged buffer: 64528 bytes allocated at line 118 of btape block.c 25-Sep 11:41 btape: ABORTING due to ERROR in smartall.c:413 Damaged buffer found. Called from btape.c:284 Segmentation fault [EMAIL PROTECTED] bacula]# Any help is appreciate

[Bacula-users] FOSDEM Presentation

again thanks for a great program and knock 'em dead at FOSDEM! -- Tom Plancon CAD/IS Manager BKA Architects, Inc. 142 Crescent St. Brockton, MA 02302 508-583-5603 [EMAIL PROTECTED] - Take Surveys. Earn Cash. I

[Bacula-users] I/O errors with ext. tape

EMAIL PROTECTED] bacula]# tar xvf /dev/nst0 /proj/Arch_Proj tar: /dev/nst0: Cannot read: Cannot allocate memory tar: At beginning of tape, quitting now tar: Error is not recoverable: exiting now I just noticed that /proc/scsi reports "ANSI  SCSI revision: 03" and  mt status reports "SC

[Bacula-users] What are "subsys"

Hi all, If I stop bacula "/etc/bacula/bacula stop", then do "/etc/bacula/bacula status" I see "bacula-sd dead but subsys locked" and so on for each daemon. What does this mean and should I be concerned? Any help appreciated! Thanks Tom Plancon CAD/IS Manag

[Bacula-users] Build from source errors

op. ... make[1]: Entering directory `/bacula-1.36.2/src/tools' g++ -c -I. -I.. -g -Wall bsmtp.c make[1]: *** No rule to make target `../lib/libbac.a', needed by `bsmtp'. Stop.make[1]: Leaving directory `/bacula-1.36.2/src/tools' make: *** [install] Error 1 Any suggesti

Re: [Bacula-users] Build from source errors

den Mittelstand: http://cira.web-arts.de Kern Sibbald schrieb: On Thursday 24 March 2005 21:45, Tom Plancon wrote: Hi all, I'm attempting to build 1.36.2 on RH9 from source. Very green at this so bear with me. Here is my configure script: #!/bin/sh # Tom's config script on Empero

Re: [Bacula-users] Build from source errors

Jeff McCune wrote: Tom Plancon wrote: Sorry if my procedure was unclear. What I actually did was: configure script make make clean make install -- That is when the errors occurred. Why are you doing a make clean in between a make and a make install? Make clean removes and cleans the work done by

Re: [Bacula-users] Build from source errors

Kern Sibbald wrote: On Friday 25 March 2005 15:06, Tom Plancon wrote: Tobias Barth wrote: "make install" always does a "make" when the things that should be installed are not there. This is why the compiler errors occur. On my SuSE system I also encountered this problem

Re: [Bacula-users] PG database error

Craig, Thanks for the response. I altered all the tables to owner "bacula", ran catalogbackup and got the same error: 08-Apr 10:04 p-plover-dir JobId 5: BeforeJob: pg_dump: Error message from server: ERROR: permission denied for relation contact_userid_seq So I went in to the db via phpPgAdm

Re: [Bacula-users] vchanger and 'label barcodes' issue

Thanks for the quick reply! I was a little too aggressive and deleted everything from the USB drive including the index. So I shut down bacula, deleted the vchanger drive directory in /var/lib/bacula, restarted bacula and ran "vchanger -u bacula -g disk /etc/bacula/vchanger.conf initmag 1". It

[Bacula-users] Client and director mis-match, acceptable?

Hi all, I'm setting up bacula on a CentOS 7 machine. Using yum to install I get bacula 7.0.5-7 installed. A client I want to back up is running CentOS 6.8 and yum wants to install bacula 5.0.0-13 there. I've found rpms for the client, fd, that are version 7.0.5-7 but trying to install them on

[Bacula-users] SD cannot connect to FD

Hello All, I'm getting the following error when trying to back up a remote client: 01-May 17:59 pequod-fd JobId 53: Fatal error: Failed to connect to Storage daemon: gannet:9103 01-May 17:59 bacula-dir JobId 53: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 B

Re: [Bacula-users] SD cannot connect to FD

out. *Jim Richardson* *From:*Tom Plancon [mailto:tplan...@bkaarchs.com] *Sent:* Tuesday, May 2, 2017 1:29 PM *To:* bacula-users@lists.sourceforge.net *Subject:* [Bacula-users] SD cannot connect to FD Hello All, I'm getting the following error when trying to back up a remote client: 01-May 17:5

[Bacula-users] Bacula marks tape full too soon

Hi folks, Setting up Bacula 7.0.5 on Centos 7, backing up to a HPE LTO-5 Ultrium 3000 external SAS drive. Everything going fairly smoothly; bacula-sd finds the drive and btape-test reports full success. However, tried doing a test backup from a Win client using a directory of 134Gb. Backup st

Re: [Bacula-users] Bacula marks tape full too soon

the tape full", we cannot do much for you. You should also look and see if there are any messages in the OS log at the time the tape was declared full.  If there are any please include them too. Best regards, Kern On 02.02.2018 20:42, Tom Plancon wrote: Hi folks, Setting up Bacul

Re: [Bacula-users] Bacula marks tape full too soon

ape can write. Then try btape on a different tape to see what it does. Best regards, Kern On 02.02.2018 22:53, Tom Plancon wrote: Kern, Thanks much for the response! Here is the job output from Bacula, there was nothing in /var/log/messages for the time period. 01-Feb 17:01 godwit-bacula-di

Re: [Bacula-users] Bacula marks tape full too soon

eb-2018 14:56:56. Attempting traceback. Kaboom! exepath=/root Calling: /root/btraceback /root/btape 11510 /tmp Any thoughts on what this means greatly appreciated! Thanks! myEMAILsignature Thomas Plancon CAD/IT MANAGER E:  tplan...@bkaarchs.com W: www.bkaarchitects.com <http://www.bkaarchs.com> BKA

Re: [Bacula-users] Bacula marks tape full too soon

Thanks for the response. This is a brand new HP tape drive. All the tapes are brand new HP LT0-5 tapes, never used before. Kern, how would I put the drive into "BSD mode"? And how could I tell if it was in that mode? I will take a look at the sg logs. myEMAILsignature Thomas Plancon CAD/IT M

[Bacula-users] Bacula marks tape full too soon - Maximum Volume Bytes!

Hi All, Finally getting back around to this issue. I'm running Bacula 7.4.7, installed from source, on a CentOS 7 server. I'm trying to back up 2 windows clients to a  HPE LTO-5 Ultrium SAS tape drive. I have a Pool definition for each windows client, one sets "Maximum Volume Bytes = 20G" and

[Bacula-users] Can't find bacula.sql?

Hi All, I keep getting an error on my jobs: "Could not stat "/var/spool/bacula/bacula.sql": ERR=No such file or directory" The jobs do complete, but I'm not sure what "Bacula.sql" is supposed to be doing and so what may be missing from my backups. This is a recent Bacula 7.4.7 setup installed

Re: [Bacula-users] Can't find bacula.sql?

 " generate the backup and execute the following command: cat make_catalog_backup.pl <http://make_catalog_backup.pl> | grep "my \$wd Verify if the path of the script is the same of CatalogBackup FileSet. Best Regards *Wanderlei Hüttel* http://www.huttel.com.br 2018-04-02 10:43 GM

[Bacula-users] BSCAN - what to expect?

Hi folks, I'm running BSCAN to recover old data from LTO-2 tapes. The backup job spanned 3 tapes/volumes. I ran the BSCAN command listing the volumes as required with the first tape in the drive - this is NOT an autochanger. BSCAN seemed to start OK, found the tape, dbase etc., and has been r

[Bacula-users] Can't see director start up errors with systemd

Hello, I'm changing some configurations in my bacula-dir.conf on a CentOS 7 server. Unfortunately it uses the new-fangled systemd to stop and start the director. I don't get any reports as to whether it starts or not after "systemctl start bacula-dir". In the old days, if the director failed

Re: [Bacula-users] Can't see director start up errors with systemd

cula/restore/ * /chown -R bacula: /bacula/ * /Selinux policy will interfere with the restore./ o /setenforce 0/ o /setenforce 1 when restore is complete/ / /(if anyone has a better way please let me know)/ / / /So I am only installing the client / On 15

[Bacula-users] Bacula 7.4, 7, CentOS 7, and systemd - a cautionary tale

Hi folks, Just spent several frustrating hours trying to get some special backup configs into my bacula-dir.conf file. I'd shut down the Director, "sytemctl stop bacula-dir", edit the file, then start the Director, "systemctl start bacula-dir" and nothing. Did a "bacula-dir -t" and found some

Re: [Bacula-users] Bacula 7.4, 7, CentOS 7, and systemd - a cautionary tale

y have two bacula-dir.conf files on your system. The best thing is to *always* use the -c option and specify the full path to the conf file.  That way, you can be sure which one you are getting. Kern On 05/15/2018 11:09 PM, Tom Plancon wrote: Hi folks, Just spent several frustrating hours

[Bacula-users] bacula 9.6 and permissions

Hi All, I'm trying  to set up Bacula community 9.6 on my server; CentOS 7.6. It is replacing 7.5,which I ran for several years with no complaints! I'm finding that user bacula in 9.6 cannot run or access the "mt" tape command: "sudo -u bacula mt -f /dev/st0 status" fails with permission deni

Re: [Bacula-users] bacula 9.6 and permissions

Wow! Thank you Heitor! Thomas Plancon Thomas Plancon CAD/IT MANAGER E:  tplan...@bkaarchs.com W: www.bkaarchitects.com BKA/LOGO LinkedIn FaceBook

[Bacula-users] File spool location

Hello all, I'm running Bacula 9.6.3 and having some of my backups go to tape. When a backup job is spooling, especially from a windows client, I get disk space warning for the drive where bacula is installed. I've changed the "working directory" directive in bacula-dir.conf to point to another

[Bacula-users] Help with regexp

Hi folks, I need to restore data from Sept of 2020. I have the tape but the data has been purged from the database. Bconsole is asking for "Regexp matching files to restore? (empty to abort):". I'm embarrassed to say regexp is alien to me! The path I need is "/projects/2020/220089/". All fil

Re: [Bacula-users] Help with regexp

Thank you Heitor. But that says that over 500,000 files will be restored! That's the whole backup! I'm going to try the bscan method and rebuild the database with the purged data. Thomas Plancon Thomas Plancon CAD/IT MANAGER E:  tplan...@bkaarchs.com W: www.bkaarchitects.com

[Bacula-users] Bat crashing

Hello, I'm running Bacula 5.0.2 on Centos 5.2 with Postgresql db. I've installed BAT 5.0.2 and got it to start up OK but any command I issue through it crashes the gui with the following error: (:10976): Gtk-WARNING **: GtkEntry - did not receive focus-out-event. If you connect a handler to this

[Bacula-users] Bacula writing to NAS permission issue

Title: myEMAILsignature Hi All, Not purely a Bacula issue, but I've tried other sources without success. I'm setting up Bacula 5.0.2 on a Centos 5 server with the hope of Bacula writing to volumes on a Seagate Black Armor NAS device. Bacula is running fine if I write to a local disk, but I keep

[Bacula-users] IBM LTO-2 errors

Hi All, I've purchased a "refurbished" IBM Ultrium LTO-2 tape drive, and I'm running off a CentOS 5.6 system with Bacula 5.0.2. Generally it seems to work OK, doing backups and restores. However, I see errors like the following: Connecting to Storage daemon Ultrium2 at emperor-ii:9103 ... Sen

Re: [Bacula-users] IBM LTO-2 errors

John, Thanks much for the quick response! Makes me feel a bit better! Any thoughts on the orange light and #2 issue? Thanks again! On 10/18/2011 11:52 AM, John Drescher wrote: 2011/10/18 Tom Plancon: Hi All, I've purchased a "refurbished" IBM Ultrium LTO-2 tape drive, and I&

Re: [Bacula-users] IBM LTO-2 errors

case: the tape drive is external with its' own built in power supply. Maybe my "refurbished" unit is not so "refurb" after all! Thanks again! On 10/19/2011 4:55 AM, Jeremy Maes wrote: Op 18/10/2011 18:05, Tom Plancon schreef: John, Thanks much for the quick response! M