Jim,
Thanks for the great trouble shooting tips! It was a firewall issue! The
telnet test showed the problem.
Still getting use to CentOS 7, it uses firewalld instead of/with, (not
sure which), iptables. Did a little googling and found this at bacula.us:
1. firewall-cmd --permanent --zone=public –add-port=9101-9103/tcp
2. firewall-cmd --reload
Then connection was instantaneous!
Thanks again!
myEMAILsignature Thomas Plancon
CAD/IT MANAGER
E: tplan...@bkaarchs.com
W: www.bkaarchitects.com <http://www.bkaarchs.com>
BKA/LOGO
On 5/2/2017 3:08 PM, Jim Richardson wrote:
myEMAILsignature
Tom try the following
Can the console connect to the client?
# bconsole
status
3 for client
your client number
Does gannet resolve on the client?
The bacula-dir.conf storage resource address must resolve to the same
IP that your bacula-sd daemon is bound to.
Has the FD bound to the 9102 port?
netstat -na | grep 9102 && netstat -na | grep bacula-fd
You will see something like 0.0.0.0:9102 or 0.0.0.0:bacula-fd
Do you have a firewall issue?
iptables -L
iptables -L | grep 9102 && iptables -L | grep bacula-fd
cat /etc/bacula/bacula-sd
I am only interested in the top “Storage” section specifically if you
have and Address value. If you don’t Bacula will bind to 0.0.0.0 if
you do it will bind to that address only
Can you telnet from the client to the IP/Port of the fd?
Can you do it by name telnet gannet 9102 ?
Let me know how that works out.
*Jim Richardson*
*From:*Tom Plancon [mailto:tplan...@bkaarchs.com]
*Sent:* Tuesday, May 2, 2017 1:29 PM
*To:* bacula-users@lists.sourceforge.net
*Subject:* [Bacula-users] SD cannot connect to FD
Hello All,
I'm getting the following error when trying to back up a remote client:
01-May 17:59 pequod-fd JobId 53: Fatal error: Failed to connect to
Storage daemon: gannet:9103
01-May 17:59 bacula-dir JobId 53: Fatal error: Bad response to Storage
command: wanted 2000 OK storage
, got 2902 Bad storage
I have Bacula director and storage 7.0.5 installed on a CentOS 7
machine from yum. I am able to connect to the sd from bconsole, check
status and label volumes successfully I'm able to connect to the fd
on a CentOS 6.8 machine from bconsole and get the status etc. However
trying to run a backup on the 6.8 machine gives the above error after
about 30min.
Initially the client on the 6.8 machine was bacula 5.0 so I thought
that was the issue. I built a 7.0.5 client from source on the 6.8
machine but still the same error!
Any suggestions greatly appreciated! Thanks!
--
Thomas Plancon
CAD/IT MANAGER
E: tplan...@bkaarchs.com <mailto:tplan...@bkaarchs.com>
W: www.bkaarchitects.com <http://www.bkaarchs.com>
BKA/LOGO
CONFIDENTIALITY: This email (including any attachments) may contain
confidential, proprietary and privileged information, and unauthorized
disclosure or use is prohibited. If you received this email in error,
please notify the sender and delete this email from your system. Thank
you.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
