Thanks for the quick reply! I was a little too aggressive and deleted everything from the USB drive including the index. So I shut down bacula, deleted the vchanger drive directory in /var/lib/bacula, restarted bacula and ran "vchanger -u bacula -g disk /etc/bacula/vchanger.conf initmag 1". It re-created the directory in /var/lib/bacula and made the index and volume files on the USB drive. I then deleted just the volume files on the USB and started BAT:
label barcodes Automatically selected Catalog: MyCatalog Select Storage resource (1-2): Connecting to Storage daemon usbbcla1 at p-plover:9103 ... Connecting to Storage daemon usbbcla1 at p-plover:9103 ... 3306 Issuing autochanger "slots" command. Device "usbchanger" has 9 slots. Connecting to Storage daemon usbbcla1 at p-plover:9103 ... 3306 Issuing autochanger "list" command. The following Volumes will be labeled: Slot Volume ============== 1 usbbcla1_0001_0001 2 usbbcla1_0001_0002 3 usbbcla1_0001_0003 4 usbbcla1_0001_0004 5 usbbcla1_0001_0005 6 usbbcla1_0001_0006 7 usbbcla1_0001_0007 8 usbbcla1_0001_0008 9 usbbcla1_0001_0009 Select the Pool (1-3): Media record for Slot 1 Volume "usbbcla1_0001_0001" already exists. Connecting to Storage daemon usbbcla1 at p-plover:9103 ... Sending label command for Volume "usbbcla1_0001_0002" Slot 2 ... 3301 Issuing autochanger "loaded? drive 0" command. 3302 Autochanger "loaded? drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 2, drive 0" command. 3992 Bad autochanger "load slot 2, drive 0": ERR=Unknown error during program execvp. Results=failed to rename volume file while loading drive 0 from slot 2 Label command failed for Volume usbbcla1_0001_0002. Sending label command for Volume "usbbcla1_0001_0003" Slot 3 ... 3301 Issuing autochanger "loaded? drive 0" command. 3302 Autochanger "loaded? drive 0", result: nothing loaded. 3304 Issuing autochanger "load slot 3, drive 0" command. 3992 Bad autochanger "load slot 3, drive 0": ERR=Unknown error during program execvp. Results=failed to rename volume file while loading drive 0 from slot 3 ..............etc. etc. A little different than before, but still a problem! Josh Fisher wrote: > Delete the volume files from the USB drive and try again without > issuing the update slots command before the label barcodes. > > T. Plancon wrote: >> Hello, >> >> I'm working on setting up Bacula 2.4.2 with the current version of >> vchanger 0.8.2 from Sourceforge, using USB drives on CentOS 5.2. >> Everything is going pretty much as described in the vchanger HowTo, >> however "label barcodes" fails. the following is from console in BAT, >> after attaching USB drive: >> >> update slots >> Select Storage resource (1-2): Connecting to Storage daemon usbbcla1 >> at p-plover:9103 ... >> 3306 Issuing autochanger "slots" command. >> Device "usbchanger" has 9 slots. >> Connecting to Storage daemon usbbcla1 at p-plover:9103 ... >> 3306 Issuing autochanger "list" command. >> Volume "usbbcla1_0001_0001" not found in catalog. Slot=1 InChanger >> set to zero. >> Volume "usbbcla1_0001_0002" not found in catalog. Slot=2 InChanger >> set to zero. >> ................... >> Volume "usbbcla1_0001_0008" not found in catalog. Slot=8 InChanger >> set to zero. >> Volume "usbbcla1_0001_0009" not found in catalog. Slot=9 InChanger >> set to zero. >> >> label barcodes >> Connecting to Storage daemon usbbcla1 at p-plover:9103 ... >> Sending label command for Volume "usbbcla1_0001_0001" Slot 1 ... >> 3301 Issuing autochanger "loaded? drive 0" command. >> 3302 Autochanger "loaded? drive 0", result: nothing loaded. >> 3304 Issuing autochanger "load slot 1, drive 0" command. >> 3305 Autochanger "load slot 1, drive 0", status is OK. >> 3000 OK label. VolBytes=221 DVD=0 Volume="usbbcla1_0001_0001" >> Device="usbchanger-drive-0" (/var/lib/bacula/usbbcla1/drive0) >> Catalog record for Volume "usbbcla1_0001_0001", Slot 1 successfully >> created. >> Sending label command for Volume "usbbcla1_0001_0002" Slot 2 ... >> 3307 Issuing autochanger "unload slot 1, drive 0" command. >> 3304 Issuing autochanger "load slot 2, drive 0" command. >> 3305 Autochanger "load slot 2, drive 0", status is OK. >> 3920 Cannot label Volume because it is already labeled: >> "usbbcla1_0001_0001" >> Label command failed for Volume usbbcla1_0001_0002. >> Sending label command for Volume "usbbcla1_0001_0003" Slot 3 ... >> .......... >> 3920 Cannot label Volume because it is already labeled: >> "usbbcla1_0001_0001" >> Label command failed for Volume usbbcla1_0001_0008. >> Sending label command for Volume "usbbcla1_0001_0009" Slot 9 ... >> 3307 Issuing autochanger "unload slot 8, drive 0" command. >> 3304 Issuing autochanger "load slot 9, drive 0" command. >> 3305 Autochanger "load slot 9, drive 0", status is OK. >> 3920 Cannot label Volume because it is already labeled: >> "usbbcla1_0001_0001" >> Label command failed for Volume usbbcla1_0001_0009. >> >> I tried running a job just to see what would happen. >> usbbcla1_0001_0001 filled successfully and then bacula asked for a >> new volume but said no volumes could be found. Bacula seems to have >> labeled the first volume in "slot 1" of the "magazine" successfully. >> But every attempt to label the next volume in the next "slot" failed >> saying the first volume is already labeled. >> >> Any thoughts as to what could be going wrong here are greatly >> appreciated! Thanks! >> > -- Thomas E. Plancon CAD/IS Manager B K A Architects, Inc. 142 Crescent Street Brockton, MA 02302 tel: 508 . 583 . 5603 ext 313 fax: 508 . 584 . 2914 www.bkaarchitects.com <http://www.bkaarchs.com/> ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
