On Mon, Mar 9, 2009 at 1:07 PM, Prashant Ramhit
wrote:
> Hi John,
> Yes the changer unloaded the tape then I had the error message.
>
I think you need a delay after the load. There is a section it the
mtx-changer that talks about this. The reason why I believe this is
the cause is the following li
Title: Blue Barracuda
Hi John,
Yes the changer unloaded the tape then I had the error message.
Thanks again,
Prashant
John Drescher wrote:
On Mon, Mar 9, 2009 at 12:57 PM, Prashant Ramhit
wrote:
Hi All,
I manually loaded a tape in the drive and ran "btape" test.
All went well,
On Mon, Mar 9, 2009 at 12:57 PM, Prashant Ramhit
wrote:
> Hi All,
> I manually loaded a tape in the drive and ran "btape" test.
> All went well, except at the auto changer bit, where is gave me unload
> status=Bad 268435457 although the tape was unloaded to its slot.
>
> I do have mt-st installed.
ape.c:2581 "" is an invalid command
*
mimmo lariccia wrote:
> Date: Mon, 9 Mar 2009 10:00:00 -0400
> From: dresche...@gmail.com
> To: prash...@bluebarracuda.com; Bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] Quantum Superloader3 LT04
>
> On Mon,
> Date: Mon, 9 Mar 2009 10:00:00 -0400
> From: dresche...@gmail.com
> To: prash...@bluebarracuda.com; Bacula-users@lists.sourceforge.net
> Subject: Re: [Bacula-users] Quantum Superloader3 LT04
>
> On Mon, Mar 9, 2009 at 5:17 AM, Prashant Ramhit
> wrote:
> >
On Mon, Mar 9, 2009 at 5:17 AM, Prashant Ramhit
wrote:
> Hi All,
>
> Any one had previous with Quantum superloader 3 before, please let me know.
>
> btape is not working but mtx work fine.
>
> Is there any further logging I can enable, to get more information for what
> btape is finding wrong.
>
Hi All,
Any one had previous with Quantum superloader 3 before, please let me
know.
btape is not working but mtx work fine.
Is there any further logging I can enable, to get more information for
what btape is finding wrong.
Kind Regards,
Prashant
Prashant Ramhit wrote:
Hi Dan,
From
Hi Dan,
From the following files I can see the Changer device is /devsg0 and
the Archive Device is /dev/nst0.
But btape -c bacula-sd.conf /dev/nst0 give me the following and freezes
and nothing else.
r...@backupserver:/etc/bacula# *btape -c bacula-sd.conf /dev/nst0*
Tape block granularity is
Prashant Ramhit wrote:
> Hi All,
> Is anyone using a SuperLoader 3 LTO4 . I cannot get it to load and
> unload tapes.
> Please have a look at my bacula-sf.conf, is there anything wrong in it?
>
> Many thanks
> Prashant
>
>
> Storage {
> Name = server-sd
> SDPort = 9103
> WorkingDirectory
