Hi Dan,
From the following files I can see the Changer device is /devsg0 and
the Archive Device is /dev/nst0.
But btape -c bacula-sd.conf /dev/nst0 give me the following and freezes
and nothing else.
r...@backupserver:/etc/bacula# *btape -c bacula-sd.conf /dev/nst0*
Tape block granularity is 1024 bytes.
btape: butil.c:285 Using device: "/dev/nst0" for writing.
06-Mar 16:38 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0"
command.
06-Mar 16:38 btape JobId 0: 3302 Autochanger "loaded? drive 0", result:
nothing loaded.
Is there anything I can do to get this fixed please,
Kind regards,
Prashant
Some out put commands
r...@backupserver:/etc/bacula# *mtx -f /dev/sg2 status*
Storage Changer /dev/sg2:1 Drives, 16 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Storage Element 1:Full :VolumeTag=VOL101
Storage Element 2:Full :VolumeTag=VOL102
Storage Element 3:Empty
Storage Element 4:Empty
Storage Element 5:Empty
Storage Element 6:Empty
Storage Element 7:Empty
Storage Element 8:Empty
Storage Element 9:Empty
Storage Element 10:Empty
Storage Element 11:Empty
Storage Element 12:Empty
Storage Element 13:Empty
Storage Element 14:Empty
Storage Element 15:Empty
Storage Element 16:Empty
r...@backupserver:/etc/bacula# lsscsi
[2:0:0:0] disk ATA HDS728080PLA380 PF2O /dev/sda
[4:0:5:0] tape HP Ultrium 4-SCSI B22Z /dev/st0
[4:0:5:1] mediumx QUANTUM UHDL 0054 -
r...@backupserver:/etc/bacula# *
*
Dan Langille wrote:
> Prashant Ramhit wrote:
>> Hi All,
>> Is anyone using a SuperLoader 3 LTO4 . I cannot get it to load and
>> unload tapes.
>> Please have a look at my bacula-sf.conf, is there anything wrong in it?
>>
>> Many thanks
>> Prashant
>>
>>
>> Storage {
>> Name = server-sd
>> SDPort = 9103
>> WorkingDirectory = "/var/bacula/working"
>> Pid Directory = "/var/run"
>> Maximum Concurrent Jobs = 20
>> }
>>
>> Director {
>> Name = backupserver-dir
>> Password = "password"
>> }
>>
>> Autochanger {
>> Name = AutoLoader
>> Device = TapeDrive
>> Changer Device = /dev/sg2
>> Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
>
> Have you:
>
> run the btape tests, including the changer test?
> tried running the changer command (above) manually, from the command
> line?
>
> If yes to either, what are the results?
>
>> }
>>
>> Device {
>> Name = TapeDrive
>> Drive Index = 0
>> Autochanger = yes
>> Archive Device = /dev/nst0
>> Media Type = LTO-4
>> LabelMedia = yes; # lets Bacula label unlabeled
>> media
>> Random Access = Yes;
>> AutomaticMount = yes; # when device opened, read it
>> AlwaysOpen = yes;
>> RemovableMedia = yes;
>> RandomAccess = no;
>> Offline On Unmount = no
>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> }
>>
>> Messages {
>> Name = Standard
>> director = backupserver-dir = all
>> }
>
>
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
