Hello all,
never mind. I found the problem, the autochanger was only configured
to report one of the two tape holders.
JBB
Thursday, February 15, 2007, 5:10:02 PM, you wrote:
> Hello Magnus,
> I just installed a Dell 124T with autochanger for 16 tapes. However,
> when I use bconsole to do
Hello Magnus,
I just installed a Dell 124T with autochanger for 16 tapes. However,
when I use bconsole to do the "update" command, it only sees 8 tapes,
in fact it only thinks it is an 8 tape changer.
What do I have to do to make it see all 16 tapes?
thanks in advance.
JBB
Tuesday, February
Magnus Ahl <[EMAIL PROTECTED]> wrote:
> Our server came with blank tapes so there were no problem with labeling. How
> about unmounting them from bacula, feed them to the drive manualy using mtx
> and erasing them with "/bin/mt -f /dev/nst0 erase"?
Assuming that it is in fact okay to destroy the
2007/2/13, Magnus Ahl <[EMAIL PROTECTED]>:
>
> > Hi,
> > I have an Dell 124T with Autochanger for 8 tapes. My
> > configuration is as follows. So, a few questions:
> > . Is the archive device incremental (/dev/nst0, /dev/nst1, ..) ?
>
> We use the exact same hardware, but with 16 tapes. /dev/nst0 w
> Hi,
> I have an Dell 124T with Autochanger for 8 tapes. My
> configuration is as follows. So, a few questions:
> . Is the archive device incremental (/dev/nst0, /dev/nst1, ..) ?
We use the exact same hardware, but with 16 tapes. /dev/nst0 works like a
charm.
Just to be sure: you have detected
