> Hi,
> I have an Dell 124T with Autochanger for 8 tapes. My
> configuration is as follows. So, a few questions:
> . Is the archive device incremental (/dev/nst0, /dev/nst1, ..) ?
We use the exact same hardware, but with 16 tapes. /dev/nst0 works like a
charm.
Just to be sure: you have detected the SCSI device in the OS? Initialy the
DELL PV 124T has a high enough SCSI id not to be detected automaticly at
startup by a few OS:es. We've manualy had to add to /etc/rc.d/rc.local:
echo "scsi-add-single-device 0 0 6 1" > /proc/scsi/scsi
on our CentOS 3.8 server. YMMMV, of course.
> . When using this configuration, I have in bconsole a message
> to label the tape but the tape is already labelled (by btape)
> and I cannot force a new label. So, how to label my eight tapes ?
Our server came with blank tapes so there were no problem with labeling. How
about unmounting them from bacula, feed them to the drive manualy using mtx
and erasing them with "/bin/mt -f /dev/nst0 erase"?
regards,
--
Infogate AB [EMAIL PROTECTED]
Storgatan 29 tel: 035-171970
Box 345 fax: 035-171979
301 08 Halmstad www.infogate.se
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
