> Label barcodes finally worked after stopping bacula-sd. Slightly annoying.
I get the changer locked like this about 1 time every 3 months. It
happens for a variety of reasons. One such is forgetting to take the
write protect tab off the media when inserting it into the changer. I
am still using
> Label barcodes finally worked after stopping bacula-sd. Slightly annoying.
> Still not sure why Drive2 is in 'unknown' state. Let me know if you have any
> ideas.
>
I see this under some conditions myself. Its really not a problem.
Just the SD does not know what pool that the tape is in yet.
On Tue, Jun 22, 2010 at 6:15 PM, Jeremiah D. Jester
wrote:
> Ok. I thought It succeeded the first time I did it (don't have that output).
> However, when I run 'label barcodes' again it appears to error out. Issued on
> both drives, Drive 2 first, since Drive 1 is currently writing. Included
>
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0367.
Sending label command for Volume "KL0385" Slot 14 ...
3937 Device "Drive1" (/dev/st0) is busy with 1 writer(s).
Label command failed for Volume KL0385.
Sending label comman
On Tue, Jun 22, 2010 at 6:07 PM, Jeremiah D. Jester
wrote:
> Yes, correct. BTW, thanks for your help!
> JJ
>
Can you try the label barcodes again an post the entire output from
start to end.
Also we will soon have to pick this up tomorrow. Its 6:07 PM here and
almost time for me to go home..
J
> I just figured that out. I've allocated them to the 'Scratch' pool but 'list
> volumes' still shows 'No results to list'. Is there a final step?
>
You mean no volumes in the scratch pool?
John
--
ThinkGeek and WIRED's
On Tue, Jun 22, 2010 at 5:58 PM, John Drescher wrote:
> On Tue, Jun 22, 2010 at 5:55 PM, Jeremiah D. Jester
> wrote:
>> No results in Scratch pool. I've included a verbose dump, just in case.
>>
>> Thanks.
>> JJ
>>
>> *update
>> Update choice:
>> 1: Volume parameters
>> 2: Pool from resou
On Tue, Jun 22, 2010 at 5:55 PM, Jeremiah D. Jester
wrote:
> No results in Scratch pool. I've included a verbose dump, just in case.
>
> Thanks.
> JJ
>
> *update
> Update choice:
> 1: Volume parameters
> 2: Pool from resource
> 3: Slots from autochanger
> 4: Long term statistics
>
-+
Pool: Scratch
No results to list.
-Original Message-
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Tuesday, June 22, 2010 2:40 PM
To: Jeremiah D. Jester
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] unload drive failing
On Tue, Jun 22, 2010 at 5:38 PM, Jere
On Tue, Jun 22, 2010 at 5:38 PM, Jeremiah D. Jester
wrote:
> Yes, I do. Though, when I try to do 'update volume' the volume doesn't appear
> in this list to set to append. I was thinking that using 'label' would add
> the volume to the catalog/pool. Or maybe I need to 'add' the volume to a pool
062 Media record for Volume "KL0432" not found.
*
-Original Message-
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Tuesday, June 22, 2010 2:31 PM
To: Jeremiah D. Jester
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] unload drive failing
On Tue
On Tue, Jun 22, 2010 at 5:27 PM, Jeremiah D. Jester
wrote:
> Hi John,
> Thans. Here is what I did. Any thoughts on where I'm going wrong?
> JJ
>
> *release
> The defined Storage resources are:
> 1: File
> 2: Tape
> Select Storage resource (1-2): 2
> Connecting to Storage daemon Tape at bac
ginal Message-----
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Tuesday, June 22, 2010 2:16 PM
To: Jeremiah D. Jester
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] unload drive failing
> I have an ADIC scalar 24 autoloader with two drives. Drive 1
> (/dev/st0) is
> I have an ADIC scalar 24 autoloader with two drives. Drive 1 (/dev/st0) is
> currently being written to via a bacula job. Drive2 (/dev/st1) has a volume
> mounted in the drive but is not being used. Both were previously working.The
> problem is that Drive 2 won’t eject/unload the current volume.
I have an ADIC scalar 24 autoloader with two drives. Drive 1 (/dev/st0) is
currently being written to via a bacula job. Drive2 (/dev/st1) has a volume
mounted in the drive but is not being used. Both were previously working.The
problem is that Drive 2 won't eject/unload the current volume.
Also
15 matches
Mail list logo
