Yes, I do. Though, when I try to do 'update volume' the volume doesn't appear
in this list to set to append. I was thinking that using 'label' would add the
volume to the catalog/pool. Or maybe I need to 'add' the volume to a pool or
catalog?
-JJ
*update
Update choice:
1: Volume parameters
2: Pool from resource
3: Slots from autochanger
4: Long term statistics
Choose catalog item to update (1-4): 1
Parameters to modify:
1: Volume Status
2: Volume Retention Period
3: Volume Use Duration
4: Maximum Volume Jobs
5: Maximum Volume Files
6: Maximum Volume Bytes
7: Recycle Flag
8: Slot
9: InChanger Flag
10: Volume Files
11: Pool
12: Volume from Pool
13: All Volumes from Pool
14: All Volumes from all Pools
15: Enabled
16: RecyclePool
17: Action On Purge
18: Done
Select parameter to modify (1-18): 1
Defined Pools:
1: Onsite
2: Catalog
3: Offsite
4: Scratch
Select the Pool (1-4): 3
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+--
----+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | S
lot | InChanger | MediaType
| LastWritten |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+--
----+-----------+-----------+---------------------+
| 36 | KL0388 | Full | 1 | 511,433,975,808 | 513 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-21 15:57:04 |
| 37 | KL0354 | Full | 1 | 468,156,874,752 | 469 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-21 18:38:20 |
| 38 | KL0357 | Full | 1 | 306,796,170,240 | 307 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-19 05:38:20 |
| 39 | KL0368 | Error | 1 | 112,350,099,456 | 113 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-18 11:40:45 |
| 40 | KL0360 | Full | 1 | 616,387,064,832 | 621 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-22 05:08:44 |
| 41 | KL0308 | Full | 1 | 600,115,074,048 | 601 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-22 01:20:24 |
| 42 | KL0421 | Full | 1 | 508,448,102,400 | 510 |
15,120,000 | 1 |
0 | 0 | LTO2 |
2010-06-21 21:47:48 |
| 71 | KL0307 | Full | 1 | 366,277,976,064 | 367 |
15,552,000 | 1 |
1 | 1 | LTO2 |
2010-06-22 14:00:12 |
| 72 | KL0401 | Append | 1 | 45,997,056,000 | 46 |
15,552,000 | 1 |
2 | 1 | LTO2 |
2010-06-22 14:33:51 |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+--
----+-----------+-----------+---------------------+
Enter *MediaId or Volume name: KL0432
sql_get.c:1062 Media record for Volume "KL0432" not found.
*
-----Original Message-----
From: John Drescher [mailto:dresche...@gmail.com]
Sent: Tuesday, June 22, 2010 2:31 PM
To: Jeremiah D. Jester
Cc: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] unload drive failing
On Tue, Jun 22, 2010 at 5:27 PM, Jeremiah D. Jester <jj...@u.washington.edu>
wrote:
> Hi John,
> Thans. Here is what I did. Any thoughts on where I'm going wrong?
> JJ
>
> *release
> The defined Storage resources are:
> 1: File
> 2: Tape
> Select Storage resource (1-2): 2
> Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
> Enter autochanger drive[0]: 1
> 3301 Issuing autochanger "loaded? drive 1" command.
> 3302 Autochanger "loaded? drive 1", result: nothing loaded.
> 3022 Device "Drive2" (/dev/st1) released.
>
> *unmount
> The defined Storage resources are:
> 1: File
> 2: Tape
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 1
> 3301 Issuing autochanger "loaded? drive 1" command.
> 3302 Autochanger "loaded? drive 1", result: nothing loaded.
> 3002 Device "Drive2" (/dev/st1) unmounted.
>
>
> *label
> The defined Storage resources are:
> 1: File
> 2: Tape
> Select Storage resource (1-2): 2
> Enter autochanger drive[0]: 1
> Enter new Volume name: KL0423
> Enter slot (0 or Enter for none): 3
> Defined Pools:
> 1: Onsite
> 2: Catalog
> 3: Offsite
> 4: Scratch
> Select the Pool (1-4): 3
> Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
> Sending label command for Volume "KL0423" Slot 3 ...
> 3301 Issuing autochanger "loaded? drive 1" command.
> 3302 Autochanger "loaded? drive 1", result: nothing loaded.
> 3304 Issuing autochanger "load slot 3, drive 1" command.
> 3992 Bad autochanger "load slot 3, drive 1": ERR=Child exited with code 1.
> Results=Drive 1 Full (Storage Element 0 loaded)
>
> Label command failed for Volume KL0423.
> Do not forget to mount the drive!!!
>
Why are you labeling volumes for your autochanger? I thought it had a barcode
reader.
John
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
