ks,
Stefan
Von: John Drescher [dresche...@gmail.com]
Gesendet: Freitag, 3. September 2010 18:17
An: Stefan Lubitz; bacula-users
Betreff: Re: [Bacula-users] Using multiple Drives / Bacula Version 2.4.4
> I am using a Tape library with two drives. Both are set up in the sd.conf.
>
> W
> I am using a Tape library with two drives. Both are set up in the sd.conf.
>
> What can I do to run Backupjobs on both drives at the same time?
>
> At the Moment only one drive (/dev/nst0) is used.
>
> I am using Bacula 2.4.4.
If the jobs go to different pools then bacula should automatically
ch
Hi all,
I am using a Tape library with two drives. Both are set up in the sd.conf.
What can I do to run Backupjobs on both drives at the same time?
At the Moment only one drive (/dev/nst0) is used.
I am using Bacula 2.4.4.
This is the status output:
Device status:
Autochanger "Autochanger" with d
tpcshadow wrote:
> If I run one job (say job A to pool A), the tape from pool A stays in
> drive 0. After that has finished, if I start another job (say job B
> to pool B), the library will remove the pool A tape from drive 0 and
> replace it with the pool B tape in drive 0.
I think that is just "
I forgot to mention that this is with Bacula 3.0.2.
+--
|This was sent by tpcsha...@gmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
+--
I have an autochanger with multiple tape drives, and want Bacula to better use
all the drives. I believe I have all of the concurrency settings correct,
because I can run two jobs to two different pools at the same time and one will
run to drive 0 and one to drive 1. So far, so good.
If I run
et
Subject: RE: [Bacula-users] Using multiple drives concurrently
Joshua,
I am trying to do the same, with the same luck so far. It keeps using the
already mounted volume for all the jobs, never using the second drive in the
changer. Did you ever find a way to solve this?
Thanks,
Rob
-Origin
On 11/12/2005 10:00 PM, Rob wrote:
> I am trying to do the same, with the same luck so far. It keeps using the
> already mounted volume for all the jobs, never using the second drive in the
> changer. Did you ever find a way to solve this?
No, I didn't, though I haven't put any additional effort i
] On Behalf Of Joshua Myles
Sent: Tuesday, November 08, 2005 4:56 PM
To: bacula-users@lists.sourceforge.net
Subject: Re: [Bacula-users] Using multiple drives concurrently
On 11/08/2005 03:57 PM, Kern Sibbald wrote:
> Bacula is going to "prefer" to put all jobs on the first available ta
On 11/08/2005 03:57 PM, Kern Sibbald wrote:
> Bacula is going to "prefer" to put all jobs on the first available tape,
> unless you specify different pools (i.e. different Volumes), or tell Bacula
> to not prefer an active drive, or explicitly specify a drive -- see the
> ReleaseNotes for how to
Bacula is going to "prefer" to put all jobs on the first available tape,
unless you specify different pools (i.e. different Volumes), or tell Bacula
to not prefer an active drive, or explicitly specify a drive -- see the
ReleaseNotes for how to not perfer the first available drive, I forget the
Hi all,
Sorry in advance for what is probably a conceptual oversight on my part.
I've read the Fine Manual and browsed the list archives, but I'm still
coming up short.
I have a four-drive tape library, and am using 1.38.0 on Solaris 8
SPARC. My configuration is working great, except I'm unable t
12 matches
Mail list logo
