I know that the post is old, but after some head banging I found the clue ...
I had the same problem with two LTO4 tapes (I own an Overland Arcvault 24 with
a server running ubuntu 14). The server crashed before bacula be able to end
the tape writing for these two tapes.
I found the clue reading
Quoting Deepak :
Hi,
> Quoting Radosław Korzeniewski :
>
>> Hello,
>>
>> 2013/9/24 Deepak
>>
>>> Hi,
>>>
>>> While setting up recycled volumes I was facing some issues which I have
>>> resolved with help of you guys.
>>>
>>> I have three volumes. I have written to 1st and 2nd volueme these are
Quoting Radosław Korzeniewski :
> Hello,
>
> 2013/9/24 Deepak
>
>> Hi,
>>
>> While setting up recycled volumes I was facing some issues which I have
>> resolved with help of you guys.
>>
>> I have three volumes. I have written to 1st and 2nd volueme these are
>> marked with full status. now bacul
Hello,
2013/9/25 Deepak
>
>>>
>> What issue you woluld like to resolve before that?
>>
>
>
> As I have explained in first mail of this thread. I have a volume already
> written after some time when bacula is trying to write it again then it is
> giving below error.
>
>
>
> 24-Sep 12:26 backup-di
Deepak-
I am removing all of the thread as it is becoming messy and useless.
Second, Radosław is trying to tell you that your udev rules are incorrect
for the tape drive references and that your tape changer needs a udev rule
to keep it persistent, too. You can use the persistent names provided b
Quoting Radosław Korzeniewski :
> Hello,
>
> 2013/9/25 Deepak :
>>>
>>> Well, a "second" autochanger device? :) I bet you misconfigured your
>>> tape library. In most cases it is not the problem.
>>
>>
>> I hope it is showing like that because My blade server has two hba cards
> and
>> I have done
Hello,
2013/9/25 Deepak :
>>
>> Well, a "second" autochanger device? :) I bet you misconfigured your
>> tape library. In most cases it is not the problem.
>
>
> I hope it is showing like that because My blade server has two hba cards
and
> I have done zonning of tape for both of them.
OK.
>
>>
>
Quoting Radosław Korzeniewski :
> Hello,
>
> 2013/9/24 Deepak :
>> Quoting Radosław Korzeniewski :
>>
>>> Hello,
>>>
>>> 2013/9/24 Deepak :
I have removed lin_tape driver permanently loaded st driver and rebooted
system . now it is showing st devices as my st devices.
Hello,
2013/9/24 Deepak :
> Quoting Radosław Korzeniewski :
>
>> Hello,
>>
>> 2013/9/24 Deepak :
>>>
>>>
>>> I have removed lin_tape driver permanently loaded st driver and rebooted
>>> system . now it is showing st devices as my st devices.
>>>
>>> [root@bacula ~]# lsscsi | grep tape
>>> [1:0:2:0
Quoting Radosław Korzeniewski :
> Hello,
>
> 2013/9/24 Deepak :
>>
>> I have removed lin_tape driver permanently loaded st driver and rebooted
>> system . now it is showing st devices as my st devices.
>>
>> [root@bacula ~]# lsscsi | grep tape
>> [1:0:2:0]tapeIBM ULT3580-TD4 B710
Hello,
2013/9/24 Deepak :
>
> I have removed lin_tape driver permanently loaded st driver and rebooted
> system . now it is showing st devices as my st devices.
>
> [root@bacula ~]# lsscsi | grep tape
> [1:0:2:0]tapeIBM ULT3580-TD4 B710 /dev/st0
> [1:0:3:0]tapeIBM U
Quoting Radosław Korzeniewski :
> Hello,
>
> 2013/9/24 Deepak
>
>> Hi,
>>
>> While setting up recycled volumes I was facing some issues which I have
>> resolved with help of you guys.
>>
>> I have three volumes. I have written to 1st and 2nd volueme these are
>> marked with full status. now bacul
Hello,
2013/9/24 Deepak
> Hi,
>
> While setting up recycled volumes I was facing some issues which I have
> resolved with help of you guys.
>
> I have three volumes. I have written to 1st and 2nd volueme these are
> marked with full status. now bacula just took a backup of 200 GB on 3rd
> volume
Hi,
While setting up recycled volumes I was facing some issues which I
have resolved with help of you guys.
I have three volumes. I have written to 1st and 2nd volueme these are
marked with full status. now bacula just took a backup of 200 GB on
3rd volume. After that backup I executed a re
Hi,
I have the following problem after shutdown of server:
"Error: Unable to position to end of data on device "LTO3"
(/dev/nst0): ERR=dev.c:895 ioctl MTEOM error on "LTO3" (/dev/nst0).
ERR=Input/output error.
03-May 09:39 supernoc-sd JobId 3491: Marking Volume "MARMAR11LTO3" in
Error in Catalo
It was happened with tape which was in the drive and written in time of
server reset. There are two tapes with such problem, because server was
reseted two times. There are two new tapes, writing first time. I think the
problem is the end-of-data lack on this tapes, because server was hard
reseted
Is this happening with this one tape only, or all tapes you try in this
particulat drive?
If the problem is only with this tape, is the tape old and been used a
lot? If so, then the tape has reached/passed the end of it's usefull
life. If this tape drive is in a library, check the library fo
Hi.
I run my bacula on FreeBSD 8.0-RELEASE (ProLiant ML370 G3) with HP MSL6000
ULTRIUM960. My bacula server was hard reseted then bacula write on tape.
Then server came up and bacula start working it mark tape in "error" with
log message
11-Nov 13:41 backup-sd JobId 401: Error: Unable to position
Hi,
I previously posted this issue on this list but there seems to be no
solution. I just upgraded to the latest release of bacula and the
problem still exists. I changed the error state of the volume back to
append but bacula is unable to position to the end of data. This
occurs when the
19 matches
Mail list logo
