Hi,
I previously posted this issue on this list but there seems to be no
solution. I just upgraded to the latest release of bacula and the
problem still exists. I changed the error state of the volume back to
append but bacula is unable to position to the end of data. This
occurs when the job before this one used another tape (e.g. a restore).
any ideas?
1000 OK: chet-dir Version: 2.4.3 (10 October 2008)
Enter a period to cancel a command.
*mess
14-Nov 12:31 chet-sd JobId 1140: Error: Unable to position to end of
data on device "Exabyte VXA-2 Drive" (/dev/rmt/0cbn): ERR=dev.c:1325
read error on "Exabyte VXA-2 Drive" (/dev/rmt/0cbn). ERR=I/O error.
14-Nov 12:31 chet-sd JobId 1140: Marking Volume "A0000005" in Error in
Catalog.
Device {
Name = "Exabyte VXA-2 Drive"
Drive Index = 0
Media Type = "VXA-2"
Device Type = Tape
Archive Device = /dev/rmt/0cbn
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Changer Command = "/opt/csw/etc/bacula/mtx-changer %c %o %S %a %d"
Alert Command = "sh -c '/opt/csw/sbin/tapeinfo -f %c |grep
TapeAlert|cat'"
Changer Device = /dev/scsi/changer/c2t0d0
Label Media = yes
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Backward Space Record = no
Fast Forward Space File = no
Two EOF = yes
}
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
