Re: [Bacula-users] SCSI Errors in LTO External Drive

2016-11-11 Thread Alan Brown
On 10/11/16 08:33, Alberto Brosich wrote: > Hi, > > my experience. > I had strange scsi errors. > Finally, after months of investigation and headache, I moved the scsi > controller to another pci slot and then worked all fine. This happens depressingly regularly if there are PCI bridges involved

Re: [Bacula-users] SCSI Errors in LTO External Drive

2016-11-10 Thread Alberto Brosich
Hi, my experience. I had strange scsi errors. Finally, after months of investigation and headache, I moved the scsi controller to another pci slot and then worked all fine. Regards Alberto On Thu, 10 Nov 2016 08:37:57 +0100 Ralf Brinkmann wrote: > Am 07.11.2016 um 20:57 schrieb Francisco J

Re: [Bacula-users] SCSI Errors in LTO External Drive

2016-11-09 Thread Ralf Brinkmann
Am 07.11.2016 um 20:57 schrieb Francisco Javier Funes Nieto: > Hi All, > > Bacula Server 7.4.4 in FreeBSD 10.3 with SCSI 29320ALP and LTO 3 External > SCSI Drive ... > > Doing a btape fill, same thing with btape test, in dmesg: > > (sa0:ahd0:0:3:0): CAM status: SCSI Status Error > (sa0:ahd0:0:3:0):

Re: [Bacula-users] SCSI Errors in LTO External Drive

2016-11-08 Thread Cejka Rudolf
Francisco Javier Funes Nieto wrote (2016/11/07): > Bacula Server 7.4.4 in FreeBSD 10.3 with SCSI 29320ALP and LTO 3 External > SCSI Drive ... > > Doing a btape fill, same thing with btape test, in dmesg: > > (sa0:ahd0:0:3:0): CAM status: SCSI Status Error > (sa0:ahd0:0:3:0): SCSI status: Check Co

Re: [Bacula-users] SCSI Errors in LTO External Drive

2016-11-07 Thread Francisco Javier Funes Nieto
The controller is pci-e and I bought it from Ebay, the unit it's pulled from a working system but I tested it with another controller (PCI-X) in another server (this time not FreeBSD) and passed the btape test. 2016-11-07 20:57 GMT+01:00 Francisco Javier Funes Nieto : > Hi All, > > Bacula Ser

[Bacula-users] SCSI Errors in LTO External Drive

2016-11-07 Thread Francisco Javier Funes Nieto
Hi All, Bacula Server 7.4.4 in FreeBSD 10.3 with SCSI 29320ALP and LTO 3 External SCSI Drive ... Doing a btape fill, same thing with btape test, in dmesg: (sa0:ahd0:0:3:0): CAM status: SCSI Status Error (sa0:ahd0:0:3:0): SCSI status: Check Condition (sa0:ahd0:0:3:0): SCSI sense: UNIT ATTENTION a

Re: [Bacula-users] SCSI Errors

2012-02-18 Thread Dan Langille
On Jan 23, 2012, at 6:08 PM, Nikola Lazic wrote: > I have Bacula 5.0.3 on FreeBSD 8.2 backing up to an IBM Ultrium ULT3580 tape > drive, using 400~800GB tapes, connected to an Adaptec 39320LPE Ultra320 SCSI > adapter. I'm using SQLite and have 4GB of RAM. > > I used to have a Quantum DLTV4 tape

Re: [Bacula-users] SCSI Errors

2012-01-24 Thread Nikola Lazic
On Mon, Jan 23, 2012 at 6:17 PM John Drescher wrote: > Bad tape? Drive need cleaned? I completed btape fill and unfill without errors. I cleaned the drive and will see whether that resolves the issue. Any other ideas? Nikola Lazic --

Re: [Bacula-users] SCSI Errors

2012-01-23 Thread John Drescher
On Mon, Jan 23, 2012 at 6:08 PM, Nikola Lazic wrote: > I have Bacula 5.0.3 on FreeBSD 8.2 backing up to an IBM Ultrium ULT3580 tape > drive, using 400~800GB tapes, connected to an Adaptec 39320LPE Ultra320 SCSI > adapter. I'm using SQLite and have 4GB of RAM. > > I used to have a Quantum DLTV4 tap

[Bacula-users] SCSI Errors

2012-01-23 Thread Nikola Lazic
I have Bacula 5.0.3 on FreeBSD 8.2 backing up to an IBM Ultrium ULT3580 tape drive, using 400~800GB tapes, connected to an Adaptec 39320LPE Ultra320 SCSI adapter. I'm using SQLite and have 4GB of RAM. I used to have a Quantum DLTV4 tape drive, but I was getting SCSI errors every few weeks, so I sw