Francisco Javier Funes Nieto wrote (2016/11/07): > Bacula Server 7.4.4 in FreeBSD 10.3 with SCSI 29320ALP and LTO 3 External > SCSI Drive ... > > Doing a btape fill, same thing with btape test, in dmesg: > > (sa0:ahd0:0:3:0): CAM status: SCSI Status Error > (sa0:ahd0:0:3:0): SCSI status: Check Condition > (sa0:ahd0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset > occurred) > (sa0:ahd0:0:3:0): Retrying command (per sense data) > (sa0:ahd0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM > command to clear this state. > > I don't know what's the error means but I think it's a Cable or Unit error. > > Someone see this error before ? Any suggestion to debug the error ? > Discard the cable or unit ?
Hi, I have had many problems with SCSI LTO-3. It helped me to connect just one device per one SCSI bus and to lower speed from 320 MB/s to 160 MB/s. My position is that External SCSI never worked with 320 MB/s. Maybe you could have the same problem. -- Rudolf Cejka <cejkar at fit.vutbr.cz> http://www.fit.vutbr.cz/~cejkar Brno University of Technology, Faculty of Information Technology Bozetechova 2, 612 66 Brno, Czech Republic ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
