Am 07.11.2016 um 20:57 schrieb Francisco Javier Funes Nieto: > Hi All, > > Bacula Server 7.4.4 in FreeBSD 10.3 with SCSI 29320ALP and LTO 3 External > SCSI Drive ... > > Doing a btape fill, same thing with btape test, in dmesg: > > (sa0:ahd0:0:3:0): CAM status: SCSI Status Error > (sa0:ahd0:0:3:0): SCSI status: Check Condition > (sa0:ahd0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,2 (SCSI bus reset > occurred) > (sa0:ahd0:0:3:0): Retrying command (per sense data) > (sa0:ahd0:0:3:0): tape is now frozen- use an OFFLINE, REWIND or MTEOM > command to clear this state. > > I don't know what's the error means but I think it's a Cable or Unit error. > > Someone see this error before ? Any suggestion to debug the error ? > Discard the cable or unit ? > > I've another Ultrium unit but this is internal and the server has not place > inside to put the LTO SAS Drive.
We did have SCSI errors with our old LTO4 tape device - finally the Bacula host did stuck on booting. I replaced the two obviously cooked 1500nF capacitors of the LSI SAS PCIe controller and everything was fine again. -- Ralf Brinkmann ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
