ganiuszka wrote:
> mt-gnu can not switch the hardware compression but mt-st can switch it.
>
> In addition, in mtx tools you will find program called tapeinfo. It can
> show the hardware compression state for a tape drive and much more.
smartctl will also provide useful information if the tape
W dniu 2010.08.18 16:57, Romer Ventura pisze:
> Hello,
>
> I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4 tape
> drive. If i want to enable hardware compression so i can use 320GB from
> my VS1 tapes all i would need to do is run this command: mt -f
> /dev/nst0 defcompression 1,
> Hello,
>
> I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4
> tape drive. If i want to enable hardware compression so i can use
> 320GB from my VS1 tapes all i would need to do is run this command:
> mt -f /dev/nst0 defcompression 1, correct?
>
> Is there any way to
Hello
> If i want to enable hardware compression so i can use 320GB from
> my VS1 tapes
2:1 hardware compression for general data is quite an optimistic figure,
but I am sure you already know that...
> mt -f /dev/nst0 defcompression 1, correct?
"mt defcompression" controls the default compressi
> I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4 tape
> drive. If i want to enable hardware compression so i can use 320GB from my
> VS1 tapes all i would need to do is run this command: mt -f
> /dev/nst0 defcompression 1, correct?
> Is there any way to enable and disable hardwar
Hello,
I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4
tape drive. If i want to enable hardware compression so i can use
320GB from my VS1 tapes all i would need to do is run this command:
mt -f /dev/nst0 defcompression 1, correct?
Is there any way to enable and disabl
