> Hello,
>
> I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4
> tape drive. If i want to enable hardware compression so i can use
> 320GB from my VS1 tapes all i would need to do is run this command:
> mt -f /dev/nst0 defcompression 1, correct?
>
> Is there any way to enable and disable hardware compression using
> bacula before a job starts..?
>
> Thanks
> ------
> Romer Ventura
>
Not sure which *nix version you are running but on RedHat 4/5 the command is
mt -f /dev/stX compression (substitute X with the correct
device number)
Run "mt -f /dev/stX status" before and after issuing the "compression
command" to compare the change in status.
You may need to adjust other parameters also which was the case with
my LTO4 drives.
You can run a shell script to turn compression ON/OFF before your
actual job starts.
Cheers,
Win
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
