Yes John...
Now, I think that I understood perfectly and I have tested it too.
VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
DiskToCatalog = Compares the files of the File Deamon's File Set with
the Catalog;
Catalog = Like the DiskToCatalog but for
> Hi John,
>
> Well, I've tested like the way you said me and it worked.
> I used the Level DiskToCatalog cause is a Backup in Disk,
That level compares what is on your source filesystem currently with
what the MD5/SHA1 was recorded in your catalog. You wanted
"VolumeToCatalog" to compare what is
Please try to always email the list..
-- Forwarded message --
From: Rickifer Barros
Date: Tue, May 31, 2011 at 5:28 PM
Subject: Re: [Bacula-users] Verify Catalog
To: John Drescher
Hi John,
Well, I've tested like the way you said me and it worked.
I used the Level DiskToCatalo
Hi John,
Well, I've tested like the way you said me and it worked.
I used the Level DiskToCatalog cause is a Backup in Disk, so, I've noticed
that it always do the "verify" with the last job written on the Catalog.
Thus, I couldn't check an older backup.
Another thing...in this test I got two .tx
2011/5/31 Rickifer Barros :
> Hello Bacula Users,
>
> I'm trying to test the Verify Job but, how I could understand, I have to
> create another catalog just for verifications, but I'm not getting do this.
> I have installed Bacula on Debian through the aptitude with PostGre. Now I
> dont know how c
Hello Bacula Users,
I'm trying to test the Verify Job but, how I could understand, I have to
create another catalog just for verifications, but I'm not getting do this.
I have installed Bacula on Debian through the aptitude with PostGre. Now I
dont know how create this catalog. I've tried create a
On Mon, May 30, 2011 at 11:33 PM, John Drescher wrote:
>> I added a network interface to the backup server on the same segment
>> as the client and the timeout disappeared, so it seems my firewall was
>> expiring a TCP session somewhere along the line. Unsure whether it's a
>> configuration proble
Hi Craig,
I haven't tested HA using Bacula, but I've done it for another type
of service using Keepalived.
http://www.keepalived.org/
In the case of having at least two Bacula Directors in different
machines (one online and the other wating for the first to die), the
storage should be in
2011/5/31 "Stefan Günther" :
> Hi,
>
> °Why do you want to do that? Lets Bacula manages all the tapes.
> °
> Well, I would, but my client want's to have a visible prove that the monday
> backup has been saved on the corresponding tape.
>
> °° Do I have to create a single pool for every single day
I was wondering if anyone had setup multiple directors in a kind of
High Availability setup, or if they run multiple directors how do you
setup the multiple directors?
Thanks.
--
Craig Van Tassle
HUBzero.org
System Administrator
YONG 1006
Desk Phone : (765)496-6413
-
Hi,
°Why do you want to do that? Lets Bacula manages all the tapes.
°
Well, I would, but my client want's to have a visible prove that the monday
backup has been saved on the corresponding tape.
°° Do I have to create a single pool for every single day together with a
single entry for every day
On Tue, May 31, 2011 at 12:15 PM, SSzretter
wrote:
> According to the bacula feature set it supports backing up a windows machine
> via SMB file share. How do you configure this?
>
> For example, I would imagine somewhere I need to specify \\machinename\c$
>
You can mount the windows share on a
Hello,
2011/5/31 "Stefan Günther"
>
> I already wrote the days Mon-Sun on the tapes.
>
>
Good for you.
> My question now is, who do I tell Bacula to use the "monday" tape in slot 1
> for the backup on monday evening and so on?
>
>
Why do you want to do that? Lets Bacula manages all the tapes.
According to the bacula feature set it supports backing up a windows machine
via SMB file share. How do you configure this?
For example, I would imagine somewhere I need to specify \\machinename\c$
?
+--
|This was sent by ssz
On 05/31/11 11:51, Radosław Korzeniewski wrote:
> I think a simplest way to recover from above situation is to restore all
> files from a backup to original location with option for never overwrite
> an existing files. Something like this:
True, 'never overwrite' would be even safer. There's alwa
Hello,
I have a tapeloader with 8 slots, filled with 7 backup tapes and a cleaning
tape.
I already wrote the days Mon-Sun on the tapes.
My question now is, who do I tell Bacula to use the "monday" tape in slot 1 for
the backup on monday evening and so on?
Do I have to create a single pool for
On Tue, May 31, 2011 at 11:56 AM, Phil Stracchino wrote:
> On 05/31/11 10:44, John Drescher wrote:
>> On Tue, May 31, 2011 at 10:11 AM, s ancelot wrote:
>>> Hi everybody !
>>> I accidentally deleted some parts of a filesystem that is backed up
>>> periodically, but I do not know exactly which fil
On 05/31/11 10:44, John Drescher wrote:
> On Tue, May 31, 2011 at 10:11 AM, s ancelot wrote:
>> Hi everybody !
>> I accidentally deleted some parts of a filesystem that is backed up
>> periodically, but I do not know exactly which files have been dropped
>> (rm -rf ,and CTRL C...)
>>
>> So, Is
Hello,
2011/5/31 s ancelot
> I accidentally deleted some parts of a filesystem that is backed up
> periodically, but I do not know exactly which files have been dropped
> (rm -rf ,and CTRL C...)
>
> So, Is there is a way to compare what changed from the last backup and
> the actual disk file
On 05/30/2011 02:11 PM, reiserfs wrote:
> Hello, im new with Bacula scene, i have used the HP Dataprotector with a HP
> Library fiber channel backup.
>
> With the Dataprotector i got 1gbps interfaces and switch and all jobs get
> done very fast, with transfer like 50-80MB/s.
>
> Now im using Bacu
On Wed, Jun 01, 2011 at 01:01:39AM +1000, James Harper wrote:
> > The error I am getting is the following:
> >
> > bacula-dir Start Backup JobId 59,
> Job=Backup_Exchange.2011-05-31_10.40.23_29
> >
> > Using Device "FileStorage"
> >
> >
> > sbs-fd Warning: VSS was not initialized properly. VS
On 5/31/2011 8:50 AM, Mauro Colorio wrote:
>> I actually don't think it's a BUG, when you put your tapes on the Scratch
>> Pool using "label barcodes", the volumes will inherit any configuration on
>> that pool, and only if that volume gets cycled to the Daily Pool
>> automatically by Bacula usin
> The error I am getting is the following:
>
> bacula-dir Start Backup JobId 59,
Job=Backup_Exchange.2011-05-31_10.40.23_29
>
> Using Device "FileStorage"
>
>
> sbs-fd Warning: VSS was not initialized properly. VSS support is
disabled.
> ERR=An attempt was made to reference a token that does
On Tue, May 31, 2011 at 10:43 AM, s ancelot wrote:
> On 31/05/2011 16:43, John Drescher wrote:
>> On Tue, May 31, 2011 at 10:11 AM, s ancelot wrote:
>>
>>> Hi everybody !
>>>
>>>
>>> I have had following problem :
>>>
>>> I accidentally deleted some parts of a filesystem that is backed up
>>> per
On 31/05/2011 16:43, John Drescher wrote:
> On Tue, May 31, 2011 at 10:11 AM, s ancelot wrote:
>
>> Hi everybody !
>>
>>
>> I have had following problem :
>>
>> I accidentally deleted some parts of a filesystem that is backed up
>> periodically, but I do not know exactly which files have been
-- Forwarded message --
From: John Drescher
Date: Tue, May 31, 2011 at 10:43 AM
Subject: Re: [Bacula-users] diff between last backup and actual
filesystem content
To: s ancelot
On Tue, May 31, 2011 at 10:11 AM, s ancelot wrote:
> Hi everybody !
>
>
> I have had following proble
Hi everybody !
I have had following problem :
I accidentally deleted some parts of a filesystem that is backed up
periodically, but I do not know exactly which files have been dropped
(rm -rf ,and CTRL C...)
So, Is there is a way to compare what changed from the last backup and
the actua
On Tue, May 31, 2011 at 10:52:21AM +0100, Marc Goujon wrote:
> This is my client configurations, and in the Plugin directory I have
> exchange-fd.dll.
>
>
> FileDaemon {# this is me
> Name = sbs-fd
> FDport = 9102# where we listen for the director
>
Thanks Radoslaw. I was not aware that (1) client definitions in bacula-dir.conf
could specify their own file/job retention and pruning values and that (2)
bacula already had this default values for clients:
File Retention = 30 days# 30 days
Job Retention = 6 months
OA staff
if you need to recycle a full pool and a piece of incremental contained in
an HD possible?
Is there any way to restore a number of incremental, but not all at
once or have
to follow the order of the incremental type and then restore the full
icrementais in order? use the bconsole.
Thank
> I actually don't think it's a BUG, when you put your tapes on the Scratch
> Pool using "label barcodes", the volumes will inherit any configuration on
> that pool, and only if that volume gets cycled to the Daily Pool
> automatically by Bacula using the "Scratch Pool = Scratch" parameter I told
Hello,
2011/5/30 S H
> Anyhow, I'm not sure Bacula is the right solution for this type of
> backup: the attribute despool has been running for nearly three days
> straight now. Does anybody else have experience backing up tons of
> files? Any recommendations on making it not suck?
>
>
Check your
Hello,
2011/5/31 Geert Stappers
> > > >> > > Does exist any configuration option for that?
> > > >> > >
> > > >> > No.
> > > >> > > [ delete files after backup ]
> } } }} } And a backup tool should never ever delete files.
>
Well, you try to avoid a dangerous situation, but almost all existing
On Tue, 31 May 2011 08:34:34 -0300
"Rodrigo Ferraz" wrote:
> Hello
>
> We're facing this situation where all of our past jobs, such as
> montly-based backups and anything older than 6 months, is getting
> purged from the database. This su*cks a lot, since we need to rescan
> a whole tape (with b
Hello,
2011/5/31 Rodrigo Ferraz
> -> 30-May 23:25 br01 JobId 1227: Begin pruning Jobs older than 6 months .
> -> 30-May 23:26 br01 JobId 1227: Pruned 1 Job for client mx01 from catalog.
> -> 30-May 23:26 br01 JobId 1227: Begin pruning Jobs.
> -> 30-May 23:26 br01 JobId 1227: No Files found to pr
Thanks Rodrigo...
I will really see when my tape drive arrive.
On Tue, May 31, 2011 at 12:28 AM, Rodrigo Renie Braga <
rodrigore...@gmail.com> wrote:
> Sorry, no experience on that specific Tape Drive, but if your OS support
> that hardware (i.e the devices for bacula-sd to read/write on are cr
Hello
We're facing this situation where all of our past jobs, such as montly-based
backups and anything older than 6 months, is getting purged from the
database. This su*cks a lot, since we need to rescan a whole tape (with
bscan) and reimport everything about it back to the database to execute a
This is my client configurations, and in the Plugin directory I have
exchange-fd.dll.
FileDaemon {# this is me
Name = sbs-fd
FDport = 9102# where we listen for the director
WorkingDirectory = "C:/Program Files/Bacula/working"
Pid Directory
2011/5/27 Sean Clark :
> On 05/27/2011 08:50 AM, Graham Keeling wrote:
>> Hello,
>> Does anybody know where I might be able to find a bacula-5.0.3 Mac file
>> daemon?
>> Or an installer?
>> Thanks.
> I recommend MacPort[1] for that.
>
> "port install bacula +client_only"
> "port load bacula" (as I
Op 20110530 om 10:41 schreef Konstantin Khomoutov:
> On Mon, 30 May 2011 09:24:06 +0200 Jérôme Blion wrote:
> > >> > > [ delete files after backup ]
> > >> > > Does exist any configuration option for that?
> > >> > >
> > >> > No.
> > >> Not yet... :)
> > > IMNSHO it allready exists, it is named 'R
40 matches
Mail list logo
