Hello.
I'm trying to run Bacula on Windows XP with MySQL. When I'm trying to start
bacula-dir I got this messages in log:
23-Jun 10:07 bacula-dir JobId 0: Fatal error: Query failed: SELECT VersionId
FROM Version: ERR=Commands out of sync; you can't run this command now
23-Jun 10:07 bacula-dir JobI
On 06/22/10 21:16, James Harper wrote:
>>
>> I have a system currently being backed up and I'd like to daily
> perform a
>> restore of it's backup to a shadow system (think warm-standby).
>>
>> While I guess I could rsync the appropriate dirs between the systems,
> is
>> there a way I could leverag
On 06/22/2010 01:47 PM, Martin Simmons wrote:
>> On Tue, 22 Jun 2010 05:26:18 -0500, Jon Schewe said:
>>
>> I've seen quite a bit of discussion on this on the list. It seems
>> possible, so I figured I'd try. I'm using a combination of
>> http://www.bacula.org/manuals/en/cata
>
> I have a system currently being backed up and I'd like to daily
perform a
> restore of it's backup to a shadow system (think warm-standby).
>
> While I guess I could rsync the appropriate dirs between the systems,
is
> there a way I could leverage this through a restore?
>
You can pipe comm
On Tue, Jun 22, 2010 at 6:15 PM, Jeremiah D. Jester
wrote:
> Ok. I thought It succeeded the first time I did it (don't have that output).
> However, when I run 'label barcodes' again it appears to error out. Issued on
> both drives, Drive 2 first, since Drive 1 is currently writing. Included
>
Ok. I thought It succeeded the first time I did it (don't have that output).
However, when I run 'label barcodes' again it appears to error out. Issued on
both drives, Drive 2 first, since Drive 1 is currently writing. Included output
for both below just in case.
Thanks again.
JJ
Label w/ Dri
On Tue, Jun 22, 2010 at 6:07 PM, Jeremiah D. Jester
wrote:
> Yes, correct. BTW, thanks for your help!
> JJ
>
Can you try the label barcodes again an post the entire output from
start to end.
Also we will soon have to pick this up tomorrow. Its 6:07 PM here and
almost time for me to go home..
J
> I just figured that out. I've allocated them to the 'Scratch' pool but 'list
> volumes' still shows 'No results to list'. Is there a final step?
>
You mean no volumes in the scratch pool?
John
--
ThinkGeek and WIRED's
On Tue, Jun 22, 2010 at 5:58 PM, John Drescher wrote:
> On Tue, Jun 22, 2010 at 5:55 PM, Jeremiah D. Jester
> wrote:
>> No results in Scratch pool. I've included a verbose dump, just in case.
>>
>> Thanks.
>> JJ
>>
>> *update
>> Update choice:
>> 1: Volume parameters
>> 2: Pool from resou
On Tue, Jun 22, 2010 at 5:55 PM, Jeremiah D. Jester
wrote:
> No results in Scratch pool. I've included a verbose dump, just in case.
>
> Thanks.
> JJ
>
> *update
> Update choice:
> 1: Volume parameters
> 2: Pool from resource
> 3: Slots from autochanger
> 4: Long term statistics
>
No results in Scratch pool. I've included a verbose dump, just in case.
Thanks.
JJ
*update
Update choice:
1: Volume parameters
2: Pool from resource
3: Slots from autochanger
4: Long term statistics
Choose catalog item to update (1-4): 3
The defined Storage resources are:
On Tue, Jun 22, 2010 at 5:38 PM, Jeremiah D. Jester
wrote:
> Yes, I do. Though, when I try to do 'update volume' the volume doesn't appear
> in this list to set to append. I was thinking that using 'label' would add
> the volume to the catalog/pool. Or maybe I need to 'add' the volume to a pool
Yes, I do. Though, when I try to do 'update volume' the volume doesn't appear
in this list to set to append. I was thinking that using 'label' would add the
volume to the catalog/pool. Or maybe I need to 'add' the volume to a pool or
catalog?
-JJ
*update
Update choice:
1: Volume parameter
On Tue, Jun 22, 2010 at 5:27 PM, Jeremiah D. Jester
wrote:
> Hi John,
> Thans. Here is what I did. Any thoughts on where I'm going wrong?
> JJ
>
> *release
> The defined Storage resources are:
> 1: File
> 2: Tape
> Select Storage resource (1-2): 2
> Connecting to Storage daemon Tape at bac
Hi John,
Thans. Here is what I did. Any thoughts on where I'm going wrong?
JJ
*release
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
Enter autochanger drive[0]: 1
3301 Issui
> I have an ADIC scalar 24 autoloader with two drives. Drive 1 (/dev/st0) is
> currently being written to via a bacula job. Drive2 (/dev/st1) has a volume
> mounted in the drive but is not being used. Both were previously working.The
> problem is that Drive 2 won’t eject/unload the current volume.
I have an ADIC scalar 24 autoloader with two drives. Drive 1 (/dev/st0) is
currently being written to via a bacula job. Drive2 (/dev/st1) has a volume
mounted in the drive but is not being used. Both were previously working.The
problem is that Drive 2 won't eject/unload the current volume.
Also
> On Tue, 22 Jun 2010 05:26:18 -0500, Jon Schewe said:
>
> I've seen quite a bit of discussion on this on the list. It seems
> possible, so I figured I'd try. I'm using a combination of
> http://www.bacula.org/manuals/en/catalog/catalog/Installi_Configur_PostgreS.html#1107
> and
> http://www.m
Did you change the name of the catalog or change the configuration
without issuing reload in a bacula console or restarting bacula-dir?
John
--
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day
On Tue, Jun 22, 2010 at 11:54 AM, John Drescher wrote:
> On Tue, Jun 22, 2010 at 12:47 PM, Dave Buchanan
> wrote:
> > Hi John -
> >
> > yes it does bring up the schema using the bacula account
> >
>
> Can you post your bacula-dir.conf. It appears the problem is not
> database connectivity but som
On 6/22/10 9:47 AM, Geoff Steer wrote:
> Can you make a connections to the director from bconsole?
> If so, check the bat configuration file to make sure it points to the
> correct director/port. Check the password as well.
>
>
Note that the bconsole.conf file and the bat.conf file should be
ide
I have a system currently being backed up and I'd like to daily perform a
restore of it's backup to a shadow system (think warm-standby).
While I guess I could rsync the appropriate dirs between the systems, is
there a way I could leverage this through a restore?
Thanks,
peter
--
On Tue, Jun 22, 2010 at 12:47 PM, Dave Buchanan
wrote:
> Hi John -
>
> yes it does bring up the schema using the bacula account
>
Can you post your bacula-dir.conf. It appears the problem is not
database connectivity but something wrong with your configuration
file.
John
---
On Tue, Jun 22, 2010 at 12:47 PM, Dave Buchanan
wrote:
> Hi John -
>
> yes it does bring up the schema using the bacula account
>
Can you post your bacula-dir.conf. It appears the problem is not
database connectivity but something wrong with your configuration
file.
John
---
2010/6/22 Dave Buchanan :
> Hello ... I am having a issue with the catalog backups failing.
>
> We are running 5.03 on Ubuntu server 10.04 LTS 32 bit. Loaded from Rep
> The failure message is:
>
> 22-Jun 05:48 server JobId 11: shell command: run BeforeJob
> "/etc/bacula/scripts/make_catalog_backup
Hello ... I am having a issue with the catalog backups failing.
We are running 5.03 on Ubuntu server 10.04 LTS 32 bit. Loaded from Rep
The failure message is:
22-Jun 05:48 server JobId 11: shell command: run BeforeJob
"/etc/bacula/scripts/make_catalog_backup.pl MyCatalog"
22-Jun 05:48 server Job
I've now installed VirtualBox on my Win7 machine, and run up a copy of
Debian, downloaded and build bacula 5.0.2. Running bat on debian (qt) works
a charm.
Selecting the Version Browser in the qt version of bat shows all the
directories and files that have been backed up. Doing the same in the
Win
Can you make a connections to the director from bconsole?
If so, check the bat configuration file to make sure it points to the
correct director/port. Check the password as well.
Regards
geoff
On Tue, 2010-06-22 at 15:42 +0200, Cato Myhrhagen wrote:
> Hello
>
> I still have som problems getting
Hello
I still have som problems getting Bacula-Bat working. Here is what i have
done so far:
1. Installed FreeBSD 8.0 rel
2. From the ports catalogue i have installed Gnome Lite
3. Uppgraded all the ports with CVsup
4. Then I installed Bacula 5.0.0.1 rel (with MySQL), altso from the ports
cat
I've seen quite a bit of discussion on this on the list. It seems
possible, so I figured I'd try. I'm using a combination of
http://www.bacula.org/manuals/en/catalog/catalog/Installi_Configur_PostgreS.html#1107
and
http://www.mail-archive.com/bacula-users@lists.sourceforge.net/msg40993.html
I did
On Monday 21 June 2010 11:47:00 Ulrich Leodolter wrote:
> hi,
>
> on sunday we are running an end-of-week script
> which sets all tapes in loader to status used
> and runs release on both drives.
>
> release storage=Tape drive=0
> release storage=Tape drive=1
>
> on monday morning copy jobs are sch
Am Montag, den 21.06.2010, 11:27 -0400 schrieb John Drescher:
> On Mon, Jun 21, 2010 at 7:35 AM, Lukas Kolbe wrote:
> > Am Montag, den 21.06.2010, 11:06 +0100 schrieb Alan Brown:
> >> On 21/06/10 10:56, Lukas Kolbe wrote:
> >> >
> >> > For comparison, I dd'ed a volume to /dev/null while the copy j
32 matches
Mail list logo
