Hi,
I've created several catalogs in my testing setup. I'd like to browse these,
now but I can't find the command to browse a given catalog only. Isn't it
possible?
Cheers.
-
This SF.net email is sponsored by DB2 Express
Down
Kern Sibbald wrote:
> Hello,
>
> I have built a new version of the Win32 binaries, which is labeled 2.0.4 and
> is version 2.0.3 plus a few fixes, including what I hope will fix the
> ftruncate problem. Since I have not tested this code, I am not sure what it
> will do, so please test it with c
Hi all,
I recently purchased the SONY AIT-100 ATAPI tapedrive, and I'm now trying to
get it to play nice on FreeBSD.
The OS detects something (although not exacly what I have? or?) (snippet from
dmesg):
ast0: TAPE at ata1-master UDMA66
After popping a tape (fresh out of the package. Do I have
Hi All,
I successfully bcopied a tape to disk. Then, during a subsequent bcopy
from disk to tape, I got the following output:
[EMAIL PROTECTED] ~]# bcopy -c /etc/bacula/bacula-sd.conf -i FILE0002 -o
MSR131L3 -v -w /var/bacula/spool VG1-LV0 Drive-1
bcopy: butil.c:283 Using device: "VG1-LV0" for r
I see I have good/bad timing. I will be trying the 2.0.4 binaries.
Jeff Dickens wrote:
> It seems to have just fallen right over at the end of the tape. The "btape
> test" worked fine. Apparently I was too optimistic. See below for what the
> beginning of "btape fill" looks like.
>
>
>
> 30-
It seems to have just fallen right over at the end of the tape. The "btape
test" worked fine. Apparently I was too optimistic. See below for what the
beginning of "btape fill" looks like.
30-Apr 12:32 packrat-dir: Start Backup JobId 6009, Job=liz1.2007-04-30_12.32.02
30-Apr 12:47 kestrel-sd
This looks great, but
Are you then restricted to install on the same hardware and the same disk
setup?
Mandag 30 april 2007 15:44 skrev Josh Fisher:
> I have used Mondo/Mindi. I'm not sure there is a need to incorporate
> Mindi into Bacula though. For one thing, Mindi will work only for Linux
> a
> > On Apr 29, 2007, at 4:28 AM, John Steel wrote:
> >> 2. Why does the "bytes" column show 58.2M when I know the backup is
> >> much
> >> bigger?
>
> Maybe you've got compression enabled on your job or on the tape drive
> (though I'm not sure whether Bacula is actually aware of the compressed
> si
I do know that in bcosole, you must mount the drive and then issue
label
to label the media mounted in the volume. Very similar with disc
backups if you aren't automatically labeling the volumes. Your choice
what to name it. Bacula will then use the newly created volume for
the backup job.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
No. I'd say more, but there isn't any more. :)
=R
Naufal Sheikh wrote:
> Hi
>
> Is there any way to pause a job which is running and then restart it
> from where it was paused without effecting anything. I am asking the
> question because I am antic
Hi
Is there any way to pause a job which is running and then restart it from
where it was paused without effecting anything. I am asking the question
because I am anticipating a situation where I might need to use the loader
for other purposes in between the time when a job is running.
Regards
> On Mon, 30 Apr 2007 10:29:18 -0400, Ryan Novosielski said:
>
> Deleting a disk volume will not mean that it will then reuse that
> number, so you will have a blank spot if that media no longer exists. I
> think this answers your question, but I'm not 100% certain what it was
> to begin with.
Hello,
I have built a new version of the Win32 binaries, which is labeled 2.0.4 and
is version 2.0.3 plus a few fixes, including what I hope will fix the
ftruncate problem. Since I have not tested this code, I am not sure what it
will do, so please test it with caution. In addition to fixing
Everything was working last Friday but when I came in today, I noticed that
Bacula had gone from writing to Vol51, which still shows Append, to Vol58
which is full. Vol 51 is in slot 5 and vol58 is in slot 4. Vol52, 53, 54,
55 are in slot 6, 7, 8, 1 respectively.
I have looked through the messa
I was using that version to coincide with the director version.
If I were to install the latest version of the Bacula File Daemon, will it
still work with the older version of Bacula Director?
I know I should upgrade, and I will shortly; however, I just took over this
job and I don't want to bl
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Don't know, but I've never built anything older than 1.38.11 on HP-UX
(you should have included the version number), and in addition I've
never built on IA64, or on 11.23. If you include these things in your
ticket (though I see I missed Itanium, but I
OK, It seems as the I had no errors when I did the configure but errors in
the make. Here is what I did and the results
#CFLAGS="-g -Wall" \
./configure \
--sbindir=/opt/bacula/bin \
--sysconfdir=/opt/bacula \
--with-pid-dir=/opt/bacula/bin/working \
--with-subsys-dir=/opt/bacul
Hello,
Would the user who has been suffering from the Windows ftruncate bug for
quite some now please file a bug report, and l attempt to fix it. Please
remember that Win32 servers are not fully supported, and we don't have any
resident Win32 expert, so don't hold your breath.
Sorry, but I o
Alan Brown <[EMAIL PROTECTED]> wrote:
>
> In an effort to avoid ever having to do a server rebuild, I run
> all disks other than Spool in Raid-1 and drive health checks in
> fairly paranoid mode plus keep enough spares to be able to transfer
> the drives into an identical chassis if need be. It's
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Deleting a disk volume will not mean that it will then reuse that
number, so you will have a blank spot if that media no longer exists. I
think this answers your question, but I'm not 100% certain what it was
to begin with. :)
Mike Seda wrote:
> Thank
Thank you very much for the quick/great respsonses. ;-) The disk
volume (required due to my lack of a second tape drive) introduces one
more question... After I am done bcopying from the disk volume to the
final duplicate tape volume, is it better to delete or disable the disk
volume? I ask t
Erich Prinz wrote:
> I can only get you pointed in the direction you need to take --
> hopefully one with more tape savvy will chime in here.
>
> From my limited experience with tapes, there are a couple utilities
> that need to be run to make sure bacula can talk to the drive. One
> utility wil
I have used Mondo/Mindi. I'm not sure there is a need to incorporate
Mindi into Bacula though. For one thing, Mindi will work only for Linux
and FreeBSD. For another, Bacula already has the hooks to incorporate
Mondo/Mindi through a RunScript directive in bacula-dir.conf. I have
always run mond
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Erich Prinz wrote:
> There are also the mtx-changer scripts and some modifications that
> will alert you to tape changes (see notes in the source code for more
> details.)
No need for mtx-changer scripts just to be notified when a tape needs to
be
I can only get you pointed in the direction you need to take --
hopefully one with more tape savvy will chime in here.
From my limited experience with tapes, there are a couple utilities
that need to be run to make sure bacula can talk to the drive. One
utility will write to the tape checki
> On Sun, 29 Apr 2007 21:22:20 -0400, Mike Seda said:
>
> All,
> I want to duplicate a tape volume to another tape volume. Since I only
> have one tape drive, I must copy the tape volume to a disk volume and
> then copy the disk volume to a duplicate tape.
>
> Question # 1
> If I ever need
On Sun, 29 Apr 2007, Jonathan B Bayer wrote:
> Has anyone ever thought about doing with Bacula and Mindi what Mondo
> and Mindi do? Mondo and Mindi are a complete disaster recovery
> solution for one computer, in that a complete image is taken of the
> system, stored in whatever media is selected
On Friday 27 April 2007 14:03, Frank Sweetser wrote:
> On Fri, Apr 27, 2007 at 10:03:23AM +0300, Silver Salonen wrote:
> > Hi.
> >
> > Am I wrong if I say that one FD can't communicate with multiple SDs with
> > different TLS certificates?
> >
> > As I've understood, there can be only one TLS-co
28 matches
Mail list logo
