OK, It seems as the I had no errors when I did the configure but errors in
the make. Here is what I did and the results
#CFLAGS="-g -Wall" \
./configure \
--sbindir=/opt/bacula/bin \
--sysconfdir=/opt/bacula \
--with-pid-dir=/opt/bacula/bin/working \
--with-subsys-dir=/opt/bacula/bin/working \
--enable-smartalloc \
--enable-client-only \
--with-working-dir=/opt/bacula/bin/working \
[EMAIL PROTECTED]
[EMAIL PROTECTED]
--with-smtp-host=localhost
In the config.log file I noticed the following,
configure:7214: gcc -E conftest.c
In file included from conftest.c:37:
/opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:4:2:
error: #error "GCC no longer implements <varargs.h>."
/opt/hp-gcc-4.1.2/lib/gcc/ia64-hp-hpux11.23/4.1.2/include/varargs.h:5:2:
error: #error "Revise your code to use <stdarg.h>."
configure:7220: $? = 1
configure: failed program was:
| /* confdefs.h. */
When I did make, I received the following errors
# make
==>Entering directory /opt/bacula/bacula-1.36.3/src
==>Entering directory /opt/bacula/bacula-1.36.3/scripts
==>Entering directory /opt/bacula/bacula-1.36.3/doc
==>Entering directory /opt/bacula/bacula-1.36.3/src/lib
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alloc.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attr.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 base64.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 berrno.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bsys.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bget_msg.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bnet_server.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bpipe.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bshm.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 btime.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 cram-md5.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 crc32.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 daemon.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 edit.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fnmatch.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 hmac.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 idcache.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 jcr.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 lex.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 alist.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 dlist.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 md5.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 message.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 mem_pool.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 parse_conf.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 queue.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 rwlock.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 scan.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 serial.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 sha1.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 semlock.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 signal.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 smartall.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 tree.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 util.c
util.c: In function 'void make_session_key(char*, char*, int)':
util.c:473: error: 'getdomainname' was not declared in this scope
*** Error exit code 1
Stop.
-e ====== Error in /opt/bacula/bacula-1.36.3/src/lib ======
==>Entering directory /opt/bacula/bacula-1.36.3/src/findlib
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 match.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 find_one.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 attribs.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 create_file.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 bfile.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 enable_priv.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 fstype.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 makepath.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 save-cwd.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 winapi.c
/usr/bin/rm -f libfind.a
/usr/bin/ar cr libfind.a find.o match.o find_one.o attribs.o
create_file.o bfile.o enable_priv.o fstype.o makepath.o save-cwd.o winapi.o
ranlib libfind.a
Make: Don't know how to make ../lib/libbac.a. Stop.
-e ====== Error in /opt/bacula/bacula-1.36.3/src/findlib ======
==>Entering directory /opt/bacula/bacula-1.36.3/src/filed
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 backup.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 estimate.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 filed_conf.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 heartbeat.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 job.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 restore.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 status.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 verify_vol.c
Make: Don't know how to make ../lib/libbac.a. Stop.
-e ====== Error in /opt/bacula/bacula-1.36.3/src/filed ======
==>Entering directory /opt/bacula/bacula-1.36.3/src/console
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 console_conf.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 authenticate.c
g++ -c -I. -I.. -D_XOPEN_SOURCE_EXTENDED=1 conio.c
Make: Don't know how to make ../lib/libbac.a. Stop.
-e ====== Error in /opt/bacula/bacula-1.36.3/src/console ======
==>Entering directory /opt/bacula/bacula-1.36.3/rescue
==>Entering directory /opt/bacula/bacula-1.36.3/rescue/linux
Any ideas? Could something be wrong with the Flag in ./configure? Wrong
version of gcc? It seems that it is looking for libbac.a. I searched for
this file and it was not present. Where would I get this file?
TIA
Mike
Ryan Novosielski wrote:
>
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Sounds right to me... like I said, I did nothing special, but
> - --with-client-only (or --enable-client-only, read the configure help as
> I don't remember the flag name) is surely what I did since I did not
> build a director on that machine.
>
> Should work fine -- post errors if you get them, as it's hard to predict
> with no info.
>
> =R
>
> Mike Vasquez wrote:
>> Hi.
>>
>> It would be nice to know the procedures you used to compile HP-UX. I am
>> in
>> the same situation. I have installed gcc with success. Now, do I get
>> the
>> src and do a ./configure --with client-only? I am a newbie with bacula
>> and
>> HP.
>>
>> TIA
>> Mike
>>
>>
>> Ryan Novosielski wrote:
>>> Just built it myself on Friday. I believe I used gcc, mainly because
>>> some
>>> is in c++, and for some reason I didn't have HP's installed.
>>>
>>> Builds just fine -- no compile errors.
>>>
>>> -----Original Message-----
>>>
>>> From: Xeos Laenor <[EMAIL PROTECTED]>
>>> Subj: [Bacula-users] HP-UX clients
>>> Date: Mon Mar 5, 2007 5:45 am
>>> Size: 326 bytes
>>> To: bacula-users <bacula-users@lists.sourceforge.net>
>>>
>>> I use bacula with success on a RhEL4 Server and i need integrate a HP-UX
>>> client in order to backup it.
>>> Does a binary client exist for HP-UX (v11 for itanium)?
>>> if not, have you some advises for compiling bacula-client on HP-UX (from
>>> your own experience)?
>>>
>>> Thanks a lot
>>>
>>> Franck
>>> --- message truncated ---
>>>
>>>
>>> -------------------------------------------------------------------------
>>> Take Surveys. Earn Cash. Influence the Future of IT
>>> Join SourceForge.net's Techsay panel and you'll get the chance to share
>>> your
>>> opinions on IT & business topics through brief surveys-and earn cash
>>> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>> _______________________________________________
>>> Bacula-users mailing list
>>> Bacula-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>
>
> - --
> ---- _ _ _ _ ___ _ _ _
> |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer III
> |$&| |__| | | |__/ | \| _| |[EMAIL PROTECTED] - 973/972.0922 (2-0922)
> \__/ Univ. of Med. and Dent.|IST/AST - NJMS Medical Science Bldg - C630
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.5 (MingW32)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFGMk+Pmb+gadEcsb4RAmfWAKCA9RI+gsNP9kSkjEIrj5eWPvle2gCZAZw2
> 5Dgh+8fjzVDjPV4pHxJdTh4=
> =d6w6
> -----END PGP SIGNATURE-----
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
--
View this message in context:
http://www.nabble.com/HP-UX-clients-tf3348023.html#a10256354
Sent from the Bacula - Users mailing list archive at Nabble.com.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
