Hi,
Kern Sibbald wrote:
> On Monday 12 March 2007 04:05, Troy Daniels wrote:
>> Greetings Listers,
>>
>> Last week I upgraded my Bacula install to 2.0.2 without any issues during
>> the upgrade process.
>>
>> All seemed to be working well until Friday, but that was only because I
>> hadn't discove
First I would like to thank the development team for writing such an
excellent product; I have been using bacula on my home network for quite
some time and have very little issues with its functionality.
I apologize if this has already been answered, and if so I would
appreciate a pointer to the l
[ Sorry, meant to send it to the list ]
On 3/12/07, Pierre Bernhardt <[EMAIL PROTECTED]> wrote:
> Pierre Bernhardt schrieb:
> > Hello,
> >
> > the signature file don't corrospond to the file:
> >
> > $ /cygdrive/c/Programme/Internet/GnuPT/GPG/gpg.exe -d
> > winbacula-2.0.3.exe.sig
> > gpg: Signat
Hi,
On 3/11/2007 6:33 PM, Ferdinando Pasqualetti wrote:
>
> Hi Arno,
> I made some tests and this is what I think.
> When there is a tape change after an out of space error susequent block
> write continue to get that error even after the tape change by the
> robot. This continue.
> I made some
Hi,
On 3/11/2007 2:39 AM, Gerard Sharpe wrote:
> Arno Lehmann wrote:
>> Hi,
>>
>> On 3/8/2007 2:38 PM, Gerard Sharpe wrote:
>>> Hi all,
>>>
>>> Just after some advice about a HP SureStore E AutoLoader 818 I just
>>> picked up today second hand.
>>>
>>> The seller I purchased it from on ebay has m
Pierre Bernhardt schrieb:
> Hello,
>
> the signature file don't corrospond to the file:
>
> $ /cygdrive/c/Programme/Internet/GnuPT/GPG/gpg.exe -d winbacula-2.0.3.exe.sig
> gpg: Signature made 03/01/07 10:03:11 using DSA key ID 10A792AD
> gpg: BAD signature from "Bacula Distribution Verification K
Hi,
On 3/12/2007 1:01 PM, [EMAIL PROTECTED] wrote:
> Is there a known/standard way to get the jobid for the latest incremental
> backup for a client using
> bconsole?
The only suggestion I have is parsing a query output. Or, alternatively,
directly access the catalog.
> Or, does anyone have a
I agree 100% with Kern - if you do not know the system and it is a
critical application - either master it or use the most common
configuration to get better support or look for something else.
BTW - I did not get the original message at all. The crazy ** blah,
blah !!!* are sending yo
I have YET to get a clean backup of one of my servers. It is a windows
2003 server with the SD and FD on it. The Director is located on another
machine. I setup the director to tell the FD of this server to send it's
files to the SD of this same server which has a TAPE drive connected to
it. Th
> On Mon, 12 Mar 2007 10:06:30 -0400, Bill Szkotnicki said:
>
> Hi,
> I am backing up /home on one server to file storage on another.
> I would like a "full" to happen 4 times a year and incrementals every
> other day so I set up the following schedule:
> Schedule {
> Name = "homesched"
>
On Monday 12 March 2007 14:03, Michael Havas wrote:
> Hi,
>
> I'm currently running a 2.02 server dir and sd with mostly 2.02 clients.
> However, two clients are running Debian Stable and the 1.36 bacula-fd.
> These two clients seem to be being backed up and restored without
> problem. Should I be
On Monday 12 March 2007 13:08, [EMAIL PROTECTED] wrote:
> thanks for the remark Florian,
> but the problem is : without a backup server we can not make backups nor
> restore ! so it's realy urgent given that the production has started in a
> new country ! the version already running is under openS
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
It should be no problem to mix the point releases, unless there's a very
specific bug.
Felix Schwarz works on the RHEL4 RPM's, but give the guy a break, it's
been what, like five days since 2.0.3 was released? Blastwave hasn't
updated yet either, a la
I did not realize that I had to put all command
options except for set debug level. It does work.
Thanks,
ZK
--- DAve <[EMAIL PROTECTED]> wrote:
> Zakai Kinan wrote:
> > I am posting the relevant portions of each file:
> > FD.conf:
> >
> > #
> > # List Directors who are permitted to contac
I think the easiest way is move and then upgrade.
--
Jeronimo Zucco
LPIC-1 Linux Professional Institute Certified
Núcleo de Processamento de Dados
Universidade de Caxias do Sul
http://jczucco.blogspot.com
Jeff Dickens escreveu:
> I need to move my bacula server to a new machine, and whil
I need to move my bacula server to a new machine, and while I'm at it I
want to upgrade to 2.0.3. What would be the best approach - move and
then upgrade, or upgrade and then move, or install the new server with
2.0.3 and then move/upgrade the database?
-
Zakai Kinan wrote:
> I am posting the relevant portions of each file:
> FD.conf:
>
> #
> # List Directors who are permitted to contact this
> File daemon
> #
> Director {
> Name = backup-dir
> Password = "yes_naya"
> }
>
> #
> # Restricted Director, used by tray-monitor to get the
> # statu
I am posting the relevant portions of each file:
Dir.conf:
Director {# define myself
Name = backup-dir
Description = Central Backup Server
DIRport = 9101# where we listen for
UA connections
QueryFile = "/etc/bacula/query.sql"
WorkingDirectory
According to the release notes, this situation is not
recommended.
ZK
--- Michael Havas <[EMAIL PROTECTED]> wrote:
> Hi,
>
> I'm currently running a 2.02 server dir and sd with
> mostly 2.02 clients.
> However, two clients are running Debian Stable and
> the 1.36 bacula-fd.
> These two clie
I have a backup job running and storing on a Dell PowerVault 110T DLT
tape drive. The backup job start fine and runs fine until it gets to
998.4Mbytes. After that the job stops and the tape is put into "error".
The specific messages I get are these:
09-Mar 17:23 maint-dir: dctn.2007-03-09_17.13
Hi,
We have seen the same behaviour as described below. When a Verify job is
scheduled to run before the last Backup job is finished, it will not
verify the backup that was running but the previous job that already was
finished at schedule time. So you have to make sure that a backup job is
finish
Hi,
I am backing up /home on one server to file storage on another.
I would like a "full" to happen 4 times a year and incrementals every
other day so I set up the following schedule:
Schedule {
Name = "homesched"
Run = Fullon 1 jan apr jul oct at 18:05
Run = Incremental daily at 1:05
}
Hi,
According to your scsilist, the Ultrium name is Tape0 so for the tape
you would use 'Archive Device = Tape0'.
For the changer you need to install the HP windows driver for you
changer. It will then appear as Changer0, and you would use
'Changer Device = Changer0'.
brian-
[EMAIL PROTECTED
Hi,
I'm currently running a 2.02 server dir and sd with mostly 2.02 clients.
However, two clients are running Debian Stable and the 1.36 bacula-fd.
These two clients seem to be being backed up and restored without
problem. Should I be worried that this will fail at some point?
Thanks,
Michael
thanks for the remark Florian,
but the problem is : without a backup server we can not make backups nor
restore ! so it's realy urgent given that the production has started in a new
country ! the version already running is under openSUSE 10, so in the new
country we need to use it under Windows
Is there a known/standard way to get the jobid for the latest incremental
backup for a client using
bconsole?
Or, does anyone have a tried and trusted method of their own?
I need the jobid for an automatic restore from one client to another, in a
bconsole shell script that is
run immediately a
On Monday 12 March 2007 04:05, Troy Daniels wrote:
> Greetings Listers,
>
> Last week I upgraded my Bacula install to 2.0.2 without any issues during
> the upgrade process.
>
> All seemed to be working well until Friday, but that was only because I
> hadn't discovered this issue yet.
>
> I run seve
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Xeos Laenor wrote:
> Just one question :
> Can i use 2.0.2 clients with 2.0.3 release of Bacula?
Should work. (At least I'm using 2.0.2 Win32 clients with my 2.0.3 Linux
director.)
Greetings,
Michel
-BEGIN PGP SIGNATURE-
Version: GnuPG
Just one question :
Can i use 2.0.2 clients with 2.0.3 release of Bacula?
If not, does anyone work on clients rpms (2.0.3) for rhel4 (i386 and
x86_64)?
Thanks
Franck
-
Take Surveys. Earn Cash. Influence the Future of IT
Join
please,
where can I find examples of bacula configuration files under windows, for use
with tapes.
Nawfel
Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions !
Profitez des connaissances, des opinions et des expériences des internautes sur
Ya
>
> Hello,
>
> I'm using bacula with an iscsi storage array without any
> iscsi hba on the bacula server (a dell poweredge 600sc). As
> the cpu load is quite high during backups, I thought maybe an
> iscsi hba would help a bit.
>
> Would someone have a model to recommend that works well with linux
On Friday 16 February 2007 19:29, Kel Raywood wrote:
At first I must apologize for not answering earlier. I had to test all your
suggestions and so I wasn't able to respond earlier
> To ensure that I understand, here's what I think you want to do.
>
> Use bacula for backups to disk-based volumes
32 matches
Mail list logo
