Hi people.
I install bacula 2.0.1 in FreeBSD 6.2 Release. I have in another computer
running bacula 1.38.11 OS FreeBSD with MySQL 4.1, is working really great i
had already restore over 85GB to one Linux client running
Centos 4.4 from tape, bacula again show his power.
Well my doubt is thi
> > For now, I'm giving up on having an offsite storage daemon. I don't
> > have the money to spend on a fully working router. So I'm going to
> > just keep the storage daemon on the same machine as the director,
and
> > then rsync the physical volumes afterwards offsite.
>
> Though this is bett
> I think that makes any Bacula job longer than 10 minutes impossible
using
> this Linksys router. Looks like I'm out of luck. I have updated to
the
> newest firmware, and the Linksys config doesn't have any ability to
modify
> the timeout value. I suppose I could buy a new router, or set up a
On Wed, 2007-01-31 at 13:40 -0800, Brad Peterson wrote:
> >> Aaah, I've finally figured it out. The very common Linksys WRT54G
> v5
> >> router IS dropping inactive sockets after exactly 10 minutes.
>
> >Set heartbeat intervals to 1 minute.
>
> >Problem solved (and is why this directive is ther
>> Aaah, I've finally figured it out. The very common Linksys WRT54G v5
>> router IS dropping inactive sockets after exactly 10 minutes.
>Set heartbeat intervals to 1 minute.
>Problem solved (and is why this directive is there)
I already have the heartbeats in at 30 seconds each. Unfortunatel
On Wed, 31 Jan 2007, Kern Sibbald wrote:
> I personally I would ask for a refund on the router since it apparently
> doesn't understand keepalive and doesn't follow standard TCP/IP standards so
> does not function properly.
Fat chance of that. Linksys are notorious for lack of response to consume
On Wed, 31 Jan 2007, Brad Peterson wrote:
> Aaah, I've finally figured it out. The very common Linksys WRT54G v5
> router IS dropping inactive sockets after exactly 10 minutes.
Set heartbeat intervals to 1 minute.
Problem solved (and is why this directive is there)
--
Onsdag 31 januar 2007 17:50 skrev Ryan Novosielski:
> Dan Langille wrote:
> > On 31 Jan 2007 at 11:24, Ryan Novosielski wrote:
> >> So, I guess in summation, "Nothing to see here," or "What's the
> >> problem?"
> >>
> >> *IANA port list: http://www.iana.org/assignments/port-numbers
> >
> > Well, HP
>> Kern, if you are reading this, what are the chances that a heartbeat could
>> be implemented between the director and the storage daemon?
>Yes, that is possible, but you will need to find someone to program it.
If I knew my C++ well enough, I'd dive into it. :) Darn my lack of C++
knowled
On Wednesday 31 January 2007 20:31, Brian Debelius wrote:
> David Romerstein wrote:
> > On Wed, 31 Jan 2007, Brian Debelius wrote:
> >> Darien Hager wrote:
> >>> On Jan 31, 2007, at 10:46 AM, Brian Debelius wrote:
> I am trying to split up a config file on Windows, using the @
> directive
On Wednesday 31 January 2007 20:05, Brad Peterson wrote:
> Aaah, I've finally figured it out. The very common Linksys WRT54G v5
> router IS dropping inactive sockets after exactly 10 minutes.
>
> I verified this through a process of elimination. Any time the Linksys
> router was used, I'd get a s
> Kern, if you are reading this, what are the chances that a
> heartbeat could be implemented between the director and the storage
> daemon?
Would there be any significant downsides to a global heartbeat
directive in the director? When the director initially connects to an
FD/SD it could m
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bill Moran wrote:
> In response to Ryan Novosielski <[EMAIL PROTECTED]>:
>> Dan Langille wrote:
>>> On 31 Jan 2007 at 11:24, Ryan Novosielski wrote:
>>>
So, I guess in summation, "Nothing to see here," or "What's the
problem?"
*IANA
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian Debelius wrote:
> Darien Hager wrote:
>> On Jan 31, 2007, at 11:07 AM, Brian Debelius wrote:
> ok, doing the above helps out a little. You can now see part of the
> path after the 'config file' line
>
> I changed it to
> @C:\\Documents\ and\ Set
Hello Dan,
Thanks. Finally! You have provided the proof straight from HP's own documents
that they do use Bacula registered ports. It also proves that our users know
what they are talking about.
Regards,
Kern
On Wednesday 31 January 2007 17:39, Dan Langille wrote:
> On 31 Jan 2007 at 11:24,
Darien Hager wrote:
> On Jan 31, 2007, at 11:07 AM, Brian Debelius wrote:
>
>> Config error: Cannot open included config file : No such file or
>> directory
>>
>
> After "config file" it should list the path it attempted to open.
> From what you've written it appears blank, suggesting
On Wed, 2007-01-31 at 11:05 -0800, Brad Peterson wrote:
> Aaah, I've finally figured it out. The very common Linksys WRT54G v5
> router IS dropping inactive sockets after exactly 10 minutes.
>
> I verified this through a process of elimination. Any time the
> Linksys router was used, I'd get a
On Wed, 31 Jan 2007, Brian Debelius wrote:
> David Romerstein wrote:
>> http://www.bacula.org/dev-manual/FileSet_Resource.html#SECTION00154
>>
>> If you are entering Windows file names, the directory path may be preceded by
>> the drive and a colon (as in c:). However, the path se
On Jan 31, 2007, at 11:07 AM, Brian Debelius wrote:
> Config error: Cannot open included config file : No such file or
> directory
After "config file" it should list the path it attempted to open.
From what you've written it appears blank, suggesting some sort of
syntax or input issue rathe
David Romerstein wrote:
> On Wed, 31 Jan 2007, Brian Debelius wrote:
>
>
>> Darien Hager wrote:
>>
>>> On Jan 31, 2007, at 10:46 AM, Brian Debelius wrote:
>>>
>>>
I am trying to split up a config file on Windows, using the @
directive
as shown in http://www.bacula.org/
On Wed, 31 Jan 2007, Brian Debelius wrote:
> Darien Hager wrote:
>> On Jan 31, 2007, at 10:46 AM, Brian Debelius wrote:
>>
>>> I am trying to split up a config file on Windows, using the @
>>> directive
>>> as shown in http://www.bacula.org/dev-manual/
>>> Customizin_Configurat_Files.html but it
Darien Hager wrote:
> On Jan 31, 2007, at 10:46 AM, Brian Debelius wrote:
>
>> I am trying to split up a config file on Windows, using the @
>> directive
>> as shown in http://www.bacula.org/dev-manual/
>> Customizin_Configurat_Files.html but it
>> returns an error that it cannot find the fil
Aaah, I've finally figured it out. The very common Linksys WRT54G v5 router IS
dropping inactive sockets after exactly 10 minutes.
I verified this through a process of elimination. Any time the Linksys router
was used, I'd get a socket drop at 10 minutes (wireless or ethernet cable
included)
please read to the bottom before commenting on stuff in the middle. --
Chris H.
Bill Moran wrote:
> In response to Chris Hoogendyk <[EMAIL PROTECTED]>:
>
> [snip]
>
>
>> I passed an earlier message from this thread along to my network expert,
>> because we have had some complaints about rec
On Wed, 31 Jan 2007, Brian Debelius might have said:
> Hello,
>
> I am trying to split up a config file on Windows, using the @ directive
> as shown in
> http://www.bacula.org/dev-manual/Customizin_Configurat_Files.html but it
> returns an error that it cannot find the file. Has anyone done t
On Jan 31, 2007, at 10:46 AM, Brian Debelius wrote:
> I am trying to split up a config file on Windows, using the @
> directive
> as shown in http://www.bacula.org/dev-manual/
> Customizin_Configurat_Files.html but it
> returns an error that it cannot find the file. Has anyone done
> this in
Hello,
I am trying to split up a config file on Windows, using the @ directive
as shown in
http://www.bacula.org/dev-manual/Customizin_Configurat_Files.html but it
returns an error that it cannot find the file. Has anyone done this in
Windows?
Thanks
Brian
--
(Looks like my last message was misaddressed. Resending.)
On Jan 30, 2007, at 1:09 PM, Kern Sibbald wrote:
> Another thing to check for is HP printers on the network [...]
I don't think that's the problem in my case. While we have an HP
server on our internal office network, the two servers I w
In response to Ryan Novosielski <[EMAIL PROTECTED]>:
>
> Dan Langille wrote:
> > On 31 Jan 2007 at 11:24, Ryan Novosielski wrote:
> >
> >> So, I guess in summation, "Nothing to see here," or "What's the
> >> problem?"
> >>
> >> *IANA port list: http://www.iana.org/assignments/port-numbers
> >
>
On Wednesday 31 January 2007 5:50 pm, Ryan Novosielski wrote:
> Even so, a very small overlap:
>
> * 9100 TCP port is used for printing. Port numbers 9101 and 9102 are for
> parallel ports 2 and 3 on the three-port HP Jetdirect external print
> servers.
>
> ...and if I'm not mistaken, this is conf
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Miki Lewinger wrote:
> 3) I feel that the bacula-dir.conf file is manageable up to a certain
> number of clients/jobs... It doesn't scale up well to more than X (in my
> case x=35). Shouldn't this be saved in the bacula sql database as well ?
> Thu
On Wednesday 31 January 2007 16:38, Chris Hoogendyk wrote:
> Dan Langille wrote:
> > On 31 Jan 2007 at 11:28, Davide Bolcioni wrote:
> >> Kern Sibbald wrote:
> >>> Another thing to check for is HP printers on the network, which have
> >>> the nasty habit of using non-registered ports e.g. 9001, 900
Hello,
Very interesting results, not too surprising. See below ...
On Wednesday 31 January 2007 15:52, Alan Davis wrote:
> I've completed my initial tests with very large include lists with a
> successful outcome.
>
> The final test list was intended to simulate a backup file list
> generated by
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dan Langille wrote:
> On 31 Jan 2007 at 11:24, Ryan Novosielski wrote:
>
>> So, I guess in summation, "Nothing to see here," or "What's the
>> problem?"
>>
>> *IANA port list: http://www.iana.org/assignments/port-numbers
>
> Well, HP does use those
On 31 Jan 2007 at 11:24, Ryan Novosielski wrote:
> So, I guess in summation, "Nothing to see here," or "What's the
> problem?"
>
> *IANA port list: http://www.iana.org/assignments/port-numbers
Well, HP does use those ports:
http://www.isecom.info/cgi-
local/protocoldb/browse.dsp?search=1&fld1=1
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dan Langille wrote:
> On 31 Jan 2007 at 16:43, Davide Bolcioni wrote:
>
>> On Wednesday 31 January 2007 1:29 pm, Dan Langille wrote:
>>
Port conflicts are a known annoyance, but maybe it would help to
disseminate the information about Bacula
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I would not recommend doing this, and instead limiting media use by
VolumeUseDuration or MaximumVolumeJobs. Homegrown queries are probably
not the easiest things to follow in the future, and there is really no
need for them, I wouldn't think.
Manuel S
In response to Chris Hoogendyk <[EMAIL PROTECTED]>:
[snip]
> I passed an earlier message from this thread along to my network expert,
> because we have had some complaints about recent HP stuff. I'm only
> casually up on that stuff.
>
> I was surprised by his answer, but not by his depth of k
On 31 Jan 2007 at 16:43, Davide Bolcioni wrote:
> On Wednesday 31 January 2007 1:29 pm, Dan Langille wrote:
>
> > > Port conflicts are a known annoyance, but maybe it would help to
> > > disseminate the information about Bacula usage, for example here:
> > >
> > > http://en.wikipedia.org/wiki/L
On 31 Jan 2007 at 10:38, Chris Hoogendyk wrote:
>
>
> Dan Langille wrote:
> > On 31 Jan 2007 at 11:28, Davide Bolcioni wrote:
> >
> >
> >> Kern Sibbald wrote:
> >>
> >>
> >>> Another thing to check for is HP printers on the network, which
> >>> have the nasty habit of using non-registere
On Wednesday 31 January 2007 1:29 pm, Dan Langille wrote:
> > Port conflicts are a known annoyance, but maybe it would help to
> > disseminate the information about Bacula usage, for example here:
> >
> > http://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers
>
> The Bacula ports are list
> Tape files are different than actual files. But the fact that you
see
> neither files nor bytes indicates (to me) that your doing spooling?
Pardon my newbieness, but I'm not sure. I recall seeing a message
during a backup relating to despooling, so maybe I do have spooling set
up.
I should hav
Dan Langille wrote:
> On 31 Jan 2007 at 11:28, Davide Bolcioni wrote:
>
>
>> Kern Sibbald wrote:
>>
>>
>>> Another thing to check for is HP printers on the network, which have
>>> the nasty habit of using non-registered ports e.g. 9001, 9002, or
>>> 9003, which can cause disconnects by Ba
>> i want every media LastWritten 7 days ago to go in full status.
>> because if the media is append, it will not automatic pruned
>> i have wrote a little sql query to do the job, but want ask if there is
>> a better, than execute the sql query every day.
>
> I'll let others on this list answer y
I've completed my initial tests with very large include lists with a
successful outcome.
The final test list was intended to simulate a backup file list
generated by a db query to backup new files or files modified by a part
of our production process. The filesystems are in the 30TB range
contain
On Wednesday 31 January 2007 14:03, Michel Meyers wrote:
> Andrew Paterson wrote:
> > Hi Michel,
> > As I understand it bweb is (was) bacula-web which I use at the moment
>
> I'm not sure, bweb looks radically different from bacula-web. No idea
> whether it was developed from that or is a 'from
On Wednesday 31 January 2007 11:33, Andrew Paterson wrote:
> Hi,
> I know I am a little late with this comment and it is probably not
> welcome... But I feel it needs stating <...RANT...>
> I am not happy with the client-specific gui (bat).
> It would surely be better to have a server bas
On Wednesday 31 January 2007 12:54, Richard Mortimer wrote:
> > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf
> > Of Ruben Lopez
> > Sent: 31 January 2007 11:20
> > To: bacula-users@lists.sourceforge.net
> > Subject: [Bacula-users] Generate ISO's onl
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andrew Paterson wrote:
> Hi Michel,
> As I understand it bweb is (was) bacula-web which I use at the moment
I'm not sure, bweb looks radically different from bacula-web. No idea
whether it was developed from that or is a 'from scratch' effort, b
Hi Michel,
As I understand it bweb is (was) bacula-web which I use at the moment -
It's very useful but as you say its view only.
You are right... it could (should) be extended to provide write (control)
access.
This is where I believe the gui effort should go :) my whole point :).
Andy
On 1/31/07, Ger Apeldoorn <[EMAIL PROTECTED]> wrote:
> Perhaps you can take a look at this:
> http://www.opencountry.com/products/ocmwebminplus_home.html
>
>
I hope this is still being worked on as webmin is at version 1.320 now
and ocmwebminplus is stuck at 1.307 for 2 months and there does not
se
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ger Apeldoorn wrote:
> Perhaps you can take a look at this:
> http://www.opencountry.com/products/ocmwebminplus_home.html
>
> Ger.
>
> Op woensdag 31 januari 2007 11:33, schreef Andrew Paterson:
>> Hi,
>> I know I am a little late with this commen
On 31 Jan 2007 at 11:28, Davide Bolcioni wrote:
> Kern Sibbald wrote:
>
> > Another thing to check for is HP printers on the network, which have
> > the nasty habit of using non-registered ports e.g. 9001, 9002, or
> > 9003, which can cause disconnects by Bacula. If you find printers
> > probing
On Wed, 31 Jan 2007, Davide Bolcioni wrote:
> Should the need to introduce incompatible changes in the protocol arise, which
> I guess would be Bacula 3.0, maybe a different set of default ports could be
> considered ? HP networked printers are fairly common.
HP should be prevailed upon to fix it
Perhaps you can take a look at this:
http://www.opencountry.com/products/ocmwebminplus_home.html
Ger.
Op woensdag 31 januari 2007 11:33, schreef Andrew Paterson:
> Hi,
> I know I am a little late with this comment and it is probably not
> welcome... But I feel it needs stating <...RANT.
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf
> Of Ruben Lopez
> Sent: 31 January 2007 11:20
> To: bacula-users@lists.sourceforge.net
> Subject: [Bacula-users] Generate ISO's only
>
> Hi,
>
> Is it possible with bacula to stop after generating t
Hi,
Is it possible with bacula to stop after generating the ISO and tell
bacula not to write the actual CD/DVD? What we would like to do is to
store all the backups in a shared folder, and have one person in charge
of burning things from this directory periodically.
Thanks.
--
Hi,
I know I am a little late with this comment and it is probably not
welcome... But I feel it needs stating
<...RANT...>
I am not happy with the client-specific gui (bat).
It would surely be better to have a server based gui run from a web-browser -
what I had hoped bacula-web would
Kern Sibbald wrote:
> Another thing to check for is HP printers on the network, which have the
> nasty habit of using non-registered ports e.g. 9001, 9002, or 9003, which
> can cause disconnects by Bacula. If you find printers probing/using those
> ports, either reconfigure the printers or Bacula
On Wednesday 31 January 2007 08:41, Manuel Staechele wrote:
> hi,
>
> i want every media LastWritten 7 days ago to go in full status.
> because if the media is append, it will not automatic pruned
> i have wrote a little sql query to do the job, but want ask if there is
> a better, than execute the
Hello,
Please always copy the bacula-users list so that the others can benefit from
what you are discovering.
On Wednesday 31 January 2007 07:29, Gabriele Bulfon wrote:
> So, if I force the windows machines to 32K net buffer, what is the correct
> way to handle the others daemons?
Normally, if
61 matches
Mail list logo
