I've got a setup that's fairly simple: a bacula director, sd, and fd on a
debian box, and an fd on a remote windows box (that is, it's not even on the
LAN). The relevant sections of the config file are:
/etc/bacula/bacula-dir.conf (on the "server"):
Director {
Name = ptnv-dir
DIRport = 910
Hi,
On 11/17/2006 12:14 AM, Keith Gunderson wrote:
> Hello all, I can’t get bacula to autoload tapes in the autochanger.
> I’ve read through a few months of the archives, but I can’t sort out my
> issue from the previous issues that have been reported.
Hmm, then I suppose you've got to get to
Hello all,
I can’t get bacula to autoload tapes in the autochanger. I’ve read through a
few months of the
archives, but I can’t sort out my issue from the previous issues that have been
reported. BTW, I just started this job
and am trying to pick up where the previous admin left off. I’ve be
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael Nelson wrote:
> I am running Bacula 1.38.11 under CentOS 4.4 with a Quantum SuperLoader3
> LTO-3 changer. I have only one magazine for it so it can hold 8 tapes. I
> keep a cleaning tape in slot 8 and rotate backup tapes in slots 1-7.
>
> My
On Thu, November 16, 2006 1:23 pm, John Drescher said:
> I had simiar results with my Exabyte Magnum 224 with dual lto2 drives and
> 24
> slots with bacula 1.38.11. After upgrading to the 1.39.X version this
> problem has gone away. Bacula still does not intelligently handle both
> drives of the c
On 11/16/06, Kern Sibbald <[EMAIL PROTECTED]> wrote:
On Thursday 16 November 2006 18:49, Michael Nelson wrote:
> I am running Bacula 1.38.11 under CentOS 4.4 with a Quantum SuperLoader3
> LTO-3 changer. I have only one magazine for it so it can hold 8
tapes. I
> keep a cleaning tape in slot 8
On Thu, November 16, 2006 11:40 am, Kern Sibbald said:
> 5. If the problem occurs again, be *much* more specific about what
> happened
> (with complete console and Job report output) and what commands you issued
> when.
OK, I tried to start from as close to ground zero as possible.
1) Powercycle
On Thursday 16 November 2006 18:49, Michael Nelson wrote:
> I am running Bacula 1.38.11 under CentOS 4.4 with a Quantum SuperLoader3
> LTO-3 changer. I have only one magazine for it so it can hold 8 tapes. I
> keep a cleaning tape in slot 8 and rotate backup tapes in slots 1-7.
>
> My problem is
> On Thu, 16 Nov 2006 13:45:55 + (GMT), Alan Brown said:
>
> On Wed, 15 Nov 2006, Martin Simmons wrote:
>
> > Incremental backups use the ctime as well as the mtime by default, so it
> > depends on whether mv changes the ctime (some file systems do, some don't).
>
> rsync processes mirro
I am running Bacula 1.38.11 under CentOS 4.4 with a Quantum SuperLoader3
LTO-3 changer. I have only one magazine for it so it can hold 8 tapes. I
keep a cleaning tape in slot 8 and rotate backup tapes in slots 1-7.
My problem is that sometimes bacula goes into this loop and I just don't
know wha
On Thursday 16 November 2006 14:47, Mantas M. wrote:
> Hello,
>
> I'm using bacula in a D2D2D backup scenario (disk 2 disk 2 disk), files
> in storage daemon are overwritten every night, but they are kept in
> external hard drives for a few weeks-months.
> Since bootstrap files are overwritten e
On Thursday 16 November 2006 12:34, Georger Araujo wrote:
> Hi, sorry for not reporting earlier, had a bit of trouble on Monday, and
Wednesday was a national holiday here in Brazil.
> As per the message below, I installed the beta FD (1.39.28) on my main
Windows 2000 file server. The deep-nested
Hello Vicente,
On Wednesday 15 November 2006 17:22, Vicente Hernandez wrote:
> Hello,
>
> We need to make a backup from one server to two different locations.
> Is it possible to use two storage daemons ans use it simulataneously?
Yes, but be sure to used two different MediaTypes.
> We need t
On Wednesday 15 November 2006 16:41, Ferdinando Pasqualetti wrote:
> Hello List,
> have anyone built an RPM of bacula-client 1.38.11 for SuSe SLES 9?
> I have a couple of systems without development software installed and no
> other system with that distro.
> Does also anyone knows how to lauch th
On Wednesday 15 November 2006 17:15, Ryan Novosielski wrote:
> Here's a followup to myself. Apparently, I have two tapes called
> "catalyst_BW1" and have no idea how I could have gotten into this
> situation. One of them is a brandy new tape:
>
> Volume Label:
> Id: Bacula 1.0 immo
I feel so stupid!!! I haven't been looking around the job resource because I
thought, if it is running then the problem isn't the job..how wrong was
II have added the quotes to the end of the lines and problem solved.
Many thanks for your helpI will go and stand in the corner now with
Hi,
I have a strange problem: a remote run is completed for the file-deamon
and the storage deamon, but the director give that still running.
If I do a list jobs I got:
| 3 | Davis | 2006-11-10 15:10:33 | B| F | 538696 |
14908472806 | T |
| 4 | Davis | 20
Look carefully for missing quotes at the end of the Write Bootstrap lines!
__Martin
> On Thu, 16 Nov 2006 14:39:36 -, Luke Taylor said:
>
> OK I have run the command you gave me (stopped bacula first) and get the
> following output:
> [EMAIL PROTECTED] bin]# ./bacula-dir -f -d100
> bacu
OK I have put all the job definitions back into the directors config file.
I have run a job from two of the clients (one is a windows client, one is a
linux client) and again I get only the 5 jobs displayed.
*run
Using default Catalog name=MyCatalog DB=bacula
A job name must be specified.
The de
In response to "Luke Taylor" <[EMAIL PROTECTED]>:
> OK I have run the command you gave me (stopped bacula first) and get the
> following output:
> [EMAIL PROTECTED] bin]# ./bacula-dir -f -d100
> bacula-dir: dird.c:129 Debug level = 100
> bacula-dir: inc_conf.c:487 set wildfile 0x81c4850 size=1 *.o
OK I have run the command you gave me (stopped bacula first) and get the
following output:
[EMAIL PROTECTED] bin]# ./bacula-dir -f -d100
bacula-dir: dird.c:129 Debug level = 100
bacula-dir: inc_conf.c:487 set wildfile 0x81c4850 size=1 *.obj
bacula-dir: inc_conf.c:487 set wildfile 0x81c4850 size=2 *
In response to "Luke Taylor" <[EMAIL PROTECTED]>:
> I tried with ./bacula start -f -100 but don't get anything, I am having a
> look around to find out how to do it.
>
> I will update further if/when I manage to find instructions.
bacula-dir -f -d100
(You may have to give -c if it doesn't find t
I tried with ./bacula start -f -100 but don't get anything, I am having a
look around to find out how to do it.
I will update further if/when I manage to find instructions.
Regards
Luke
-Original Message-
From: Bill Moran [mailto:[EMAIL PROTECTED]
Sent: 16 November 2006 13:58
To: [EMAI
In response to "Luke Taylor" <[EMAIL PROTECTED]>:
> Hi I have made the amendments but still no joy... The file now contains the
> following for the two clients not showing up.
Have you tried starting the director in the foreground with debugging?
>
> JobDefs {
> Name = "Autonet"
> Type = Ba
Hi I have made the amendments but still no joy... The file now contains the
following for the two clients not showing up.
JobDefs {
Name = "Autonet"
Type = Backup
Level = Full
Client = jspautonet-fd
FileSet = "WebserverSet"
Schedule = "jspautonet-fd"
Storage = File
Messages = Stand
On Wed, 15 Nov 2006, Martin Simmons wrote:
> Incremental backups use the ctime as well as the mtime by default, so it
> depends on whether mv changes the ctime (some file systems do, some don't).
rsync processes mirror both the ctime and mtime by default.
This raises a problem if files older tha
Hello,
I'm using bacula in a D2D2D backup scenario (disk 2 disk 2 disk), files
in storage daemon are overwritten every night, but they are kept in
external hard drives for a few weeks-months.
Since bootstrap files are overwritten every night as well, it's probably
a good idea to save them to ex
Hi, sorry for not reporting earlier, had a bit of trouble on Monday, and
Wednesday was a national holiday here in Brazil.
As per the message below, I installed the beta FD (1.39.28) on my main Windows
2000 file server. The deep-nested files and directories that bacula could not
backup before are
JP skrev:
> Hye,
>
> I use bacula 1.38.7.
>
> This is an example of a FileSet I use :
>
> FileSet {
>Name = "MacOsX"
>Include {
> Options {
>signature = MD5
>compression = GZIP
>verify = s
>hfsplussupport=yes
> }
> File = "/Users/"
> Fi
Hi,
1)You should check if your file daemon is actually running.
2)If so, try to telnet from the FD machine to localhost 9102.
3)If that works, try telnetting to the FD machine from another host.
If 1 is negative, start the daemon and check if it does not crash immediately
If 2 is positive and 3 i
Good day,
I installed Bacula application on a Linux (CentOS) server.
Below is the list of information of my server.
Operating System: Linux (CentOS)
Bacula Version: bacula-1.38.11.tar
Error Encountered:
16-Nov 15:10 bacula-dir: *Console*.2006-11-16_15.10.27 Fatal error: bnet.c:859
Unable to con
31 matches
Mail list logo
