Hi,
I'm running 1.36.3 on RHEL WS 3 built from Scott Barninger's source rpm:
bacula-1.36.3-1.src.rpm. I've gotten 21 machines (about 500GB worth of
Fulls) up and running using an 8 tape LTO-2 autoloader and it all looks
very good so far. Thanks to everyone who has worked on this wonderful
p
Can anybody tell me what this message means?
My director process died a the same time?
Any thoughts?
Thanks,
Mike
[Switching to LWP 100632]
0x68120353 in pthread_testcancel () from /usr/lib/libpthread.so.1
---
This SF.Net email is spon
I'm running bacula 1.36.2 on Debian stable. Whenever I try to run a restore
job, it fails with:
19-Oct 11:29 helmsdeep: Start Restore Job Restore.2005-10-19_11.29.50
19-Oct 11:29 newman: Restore.2005-10-19_11.29.50 Fatal error: Could not
cre
Hi all,
I've been using Bacula on our FreeBSD servers for less than half of this
year and it has worked quite well. It occurred to me that I should brush up
on the Bacula recovery process and in the process of reading I find I am not
quite clear as to what I need to do in order to restore a Bacula
Hello,
On 18.10.2005 09:58, Marek Simon wrote:
I backup oracle with by way:
shut down the server, copy dbf files and start up the server
both commands are sent by bacula through "Client Run Before Job" and
"Client Run After Job" parameters. but when bacula fails to do backup
(full storage etc
Hello,
On 18.10.2005 23:17, Michael Galloway wrote:
good day all ...
i'm confused a bit about schedules. i have a basic setup of 1.33.6, i
added another job to the default config. in the console, status director
shows only default jobs:
*status director
Using default Catalog name=MyCatalog
Just the post about doing a tcp-dump. Which isn't helpful.On 10/18/05, Paul Burton <[EMAIL PROTECTED]
> wrote:Has there been a response to this post as I have exactly the sameproblem, i have done a tcp dump on both server and client and all seems aok
--Paul Burton | Systems Administrator | Reading
good day all ...
i'm confused a bit about schedules. i have a basic setup of 1.33.6, i
added another job to the default config. in the console, status
director shows only default jobs:
*status director
Using default Catalog name=MyCatalog DB=bacula
lance-dir Version: 1.36.3 (22 April 2005) x86_64
Andreas Jellinghaus wrote:
> On Tuesday 18 October 2005 19:53, Phil Stracchino wrote:
>
>>One assumes these jobs run to different Pools. The correct way to do
>>this, certainly, is to use two divverent Pools with retention set
>>differently for each Pool.
>
>
> Hi Phil,
>
> thanks for the idea
David Raine wrote:
> Good thought...
>
> OK - I have a new box of tapes and it gives the same error on three that
> I've tried from that box, too. Is there a way to get more info on the
> error? Am happy to compile with debug if that would help identify the
> cause...
Have you tried using tapeinf
Shawn Wilson wrote:
> Hi I need to change the "Max volume jobs" attribute on a volume but I
> can't figure out how other than changing the attributes of the pool and
> re-labelling the volume. Is this the only way to do it
Change the Pool definition, reload, then execute the console command
U
On Tuesday 18 October 2005 19:53, Phil Stracchino wrote:
> One assumes these jobs run to different Pools. The correct way to do
> this, certainly, is to use two divverent Pools with retention set
> differently for each Pool.
Hi Phil,
thanks for the idea. unfortunatly I'm not using serveral
pools
Good thought...
OK - I have a new box of tapes and it gives the same error on three that
I've tried from that box, too. Is there a way to get more info on the error?
Am happy to compile with debug if that would help identify the cause...
Regards
David
From: Phil Stracchino <[EMAIL PROTECTED
David Raine wrote:
> Phil,
>
> Thanks for the response and the useful info. Sadly, the error persists...
Is it consistent across multiple tapes?
--
Phil Stracchino [EMAIL PROTECTED]
Renaissance Man, Unix generalist, Perl hacker
Mobile: 603-216-7037 Landline: 603-886-3518
Title: Message
Hi I need to change
the "Max volume jobs" attribute on a volume but I can't figure out how other
than changing the attributes of the pool and re-labelling the volume. Is
this the only way to do it
Thnx
Shawn
Phil,
Thanks for the response and the useful info. Sadly, the error persists...
Regards
David
> Am totally new to bacula and have installed v1.37.41 from CVS. When I
> use the btape command and try to run "test" I get this message
> immediately and no other tests are performed. :
>
> 18-Oct 14
Erik P. Olsen wrote:
> Replying to myself! I have now seen that this conclusion is wrong. I
> haven't been testing Bacula for quite some time and yet the tape error
> has again shown its ugly face. Perhaps it's a hardware problem? Anyway,
> I apologise for having accused Bacula for this problem and
Andreas Jellinghaus wrote:
> Hi,
>
> retention times are client specific, as far as I
> can see. however I have a client with two filesets
> and two backup jobs. the first runs nightly and
> needs to be kept for a month only, the other one
> runs monthly, but needs to be kept for months.
>
> can
David Raine wrote:
> Hi list,
>
> Am totally new to bacula and have installed v1.37.41 from CVS. When I
> use the btape command and try to run "test" I get this message
> immediately and no other tests are performed. :
>
> then write 1000 records and an EOF, then rewind,
> and re-read the data to
Hi,
retention times are client specific, as far as I
can see. however I have a client with two filesets
and two backup jobs. the first runs nightly and
needs to be kept for a month only, the other one
runs monthly, but needs to be kept for months.
can I somehow set the retention time for each job
Hi list,
Am totally new to bacula and have installed v1.37.41 from CVS. When I use
the btape command and try to run "test" I get this message immediately and
no other tests are performed. :
then write 1000 records and an EOF, then rewind,
and re-read the data to verify that it is correct.
Th
Hi Paul,
As a first step, did you success in backing up the server itself ?
Ludovic.
Paul Burton a écrit :
> I'm getting really frustrated now.
> I've been trying unsuccessfully to get a backup done in bacula and am
> having trouble with an error i can't work out
> when i run the job everything
Hello,
On 18.10.2005 16:19, [EMAIL PROTECTED] wrote:
hello I will want to know how I can specify a user diferent of root in the
file bacula-dir.conf
You don't. A different user ID is specified on the command line. The
start scripts usually can handle this.
Arno
help please
Att.
Luis Al
Dear Paul,
When performing a job, the file daemon (FD) connects _directly_ to the storage
daemon (SD).
This is different from the console which performs status requests via the
director daemon (DIR).
This can cause confusion when setting up firewalls and making sure ports are
open.
You need t
On Thu, 2005-10-13 at 11:28 +0200, Erik P. Olsen wrote:
> On Tue, 2005-10-11 at 09:56 +0200, Kern Sibbald wrote:
> > On Tuesday 11 October 2005 09:06, Erik P. Olsen wrote:
> > > How does Bacula handle "foreign" tapes? I am currently using Amanda for
> > > back-up but planning to switch to Bacula an
hello I will want to know how I can specify a user diferent of root in the
file bacula-dir.conf
help please
Att.
Luis Alberto Cuenca Macas
PF. UTPL
-
Este correo fue enviado por el MENSAJERO UTPL.
http://www.utpl.edu.ec/mail/
--
I'm getting really frustrated now.
I've been trying unsuccessfully to get a backup done in bacula and am
having trouble with an error i can't work out
when i run the job everything connects ok, i have done tcpdump and seen
traffic between client and server i have check iptables and ports are
op
When I started using barcode labels I erased all tapes
(with mt commands) and the wrote new bacula labes on them
using "label barcode". also removed the old tapes from the
catalog (or changed them to not recycle).
if you want a mixed setup you can keep using "update slots scan",
once the barcodes
Bacula will use the barcode labels as the label for the tape.
The label of the tape and the barcode must match, or it will not work,
in my exigence. I am using barcodes on all my tapes. I had to relabel
all the tapes to match the barcodes...
Once it is working though, it is a breeze to swap tapes
Hi Felix,
On Fri, Oct 14, 2005 at 10:06:57AM +0200, Felix Schwarz wrote:
> Thorsten Huber schrieb:
> > is there somewhere a downloadable archive of the bacula-users and
> > bacula-devel mailinglists? I cannont find such a service on
> > sourceforge or any hints in recent mails in the sourceforge
>
Hi All,
I'm using bacula (version 1.36.3, with Linux/CRUX and kernel 2.6.12, tape
unit HP DDS-72) as my primary backup solution. It works very well, but when
there is no tape inside the tape unit the backup job fails without ask for
the required tape to the operator. Is this behaviour ok ?, how ca
Op vrijdag 14 oktober 2005 20:18, schreef Phil Stracchino:
> > I don't fully get the naming.. Should i manually give all 8 tapes a name,
> > and then add them through bconsole with the same names? But the naming i
> > want them to have is dynamic ( Label Format = "Test-$Day$Month$Year" ),
> > so it
Hello,
On 18.10.2005 09:28, Stephan Heine - Genetic Interactive wrote:
Hi all,
First off I do not use tapes, but volumes created on disk.
Let us assume that this is a new implementation. So no
Volumes exists, now they must be created.
When the schedule executes (arguments sake 5 Jobs)
Then
On Tue, 18 Oct 2005, Anwar Ahmad wrote:
Interestingly, I've relabeled a 40/80 tape that was originally in the pool
that backed up from pool1 (the one with the problem) and put it into pool2
(working normally) and it works correctly. I thought about the physical tape
drive causing the problem b
Hi Stephan,
i would solve that issue due to network topics
build a vpn (like openvpn) between the systems and then let bacula
connect to the vpn inside ip's. then the ip's are ever the same for the
services. For connecting the outside (dynamic) ip's dyndns usage or
somthing like that would help.
On Mon, 17 Oct 2005, Lyle Vogtmann wrote:
I was thinking of limiting the number of concurrent jobs. The project
manager really wants to have them all done simultaneously, not 100%
sure on the reasoning, but it is listed as a requirement. If it has a
large negative impact on performance, I'm su
Has there been a response to this post as I have exactly the same
problem, i have done a tcp dump on both server and client and all seems aok
--
Paul Burton | Systems Administrator | Reading Room
T: 020 7432 6016 | E: [EMAIL PROTECTED]
A: 53 Frith St, Soho, London W1D 4SN
Hi Christoph
Christoph Haas a écrit :
On Saturday 15 October 2005 20:51, François Roels wrote:
I'm not able to backup my server any longer. Le backup processes crach
after any attempt without usefull (for me) message.
I have filed a bug report against the package a week ago on the BT
I backup oracle with by way:
shut down the server, copy dbf files and start up the server
both commands are sent by bacula through "Client Run Before Job" and
"Client Run After Job" parameters. but when bacula fails to do backup
(full storage etc), the after command don't start and the server re
Dear Bacula-Users,
I do backups of some remote maschines using a ssh-tunnel for encrypted
connections between dir, fd, and sd.
My dir is sitting on a dial-up-adsl which reconnects every 24 hours
(just 2 sec. of timeout). When a Job is running and the reconnection
takes place the backup-job ends u
Hi,
PgSQL or MySQL? :-)
Do you have any problems using "dbcheck"?
My db (mysql) size is 19,93GB and "dbcheck"(1.36.3) dies when the memory free
is ended (RAM 2GB and SWAP 2GB).
El Lunes 17 Octubre 2005 20:05, Mark Bober escribió:
> All in all I've got about 80 clients, Windows, Solaris, and
Hi all,
First off I do not use tapes, but volumes created on disk.
Let us assume that this is a new implementation. So no
Volumes exists, now they must be created.
When the schedule executes (arguments sake 5 Jobs)
Then the first Volume gets created as per the
Label Format Value. But any subseq
Hi !
Yu Safin wrote:
One of my departments is using Oracle and via RMAN they backup to Netbackup.
How can I accomplish the same using Bacula instead of RMAN?
Is anybody backing up Oracle using Bacula?
I`m administrating two Oracle 10g Servers and back them up with bacula.
One is a development-
43 matches
Mail list logo
