On Wed, 6 Apr 2005, Jeffrey N. Miller wrote:
> Do you have to have sendmail configured or if you use only bsmtp, how can
> you send the email to your exchange server for relay?
Messages {
Name = Daemon
mailcommand = "/usr/local/bacula/sbin/bsmtp -h YOUR.EXCHANGESERVER.COM -f
\"\(Bacula\)
Do you have
to have sendmail configured or if you use only bsmtp, how can you send the email
to your exchange server for relay?
Hi.
Knut E. Meidal wrote:
As a spot-check, I have restored certain files to alternate directories,
and verified checksums on the original and the restored version.
md5/sha1 or similar.
So far, I have never seen checksum mismatches, but most of my testing
has been when I first attach a new tape u
The
question should maybe not be
"How can I be certain that the
data written to the tape is the same data that is on my hard disk",
but
"How
can I be certain that the data I restore from tape are the same as I had on my
disk..."
If you
see my meaning.
As a
spot-check, I have restor
Hi,
I backup my hard disk to a DLTIV tape. And I would like to know how can
i be certain that the data written to the tape is the same data that is
on my hard disk.
Thanks.
I want to know of someone have positive experiences
using bacula with these Autochangers:
Dell PowerValut 132T with Quantum SDLT320 drives using
SCSI LVD interface.
(Bacula´s manual tells it works)
IBM 3582-L23 With IBM LTO-2 drives using SCSI LVD
interface.
(seems to work with amanda)
Stora
I want to know of someone have positive experiences
using bacula with these Autochangers:
Dell PowerValut 132T with Quantum SDLT320 drives using
SCSI LVD interface.
(Bacula´s manual tells it works)
IBM 3582-L23 With IBM LTO-2 drives using SCSI LVD
interface.
(seems to work with amanda)
Stora
Hi Francesco,
You can use multiple catalogs with one director.
You just have to add a catalog resource in your bacula-dir.conf for each
catalog.
Best regards,
Ludovic Strappazon.
Francesco wrote:
in the official guide you say:
"...If you have over 4 billion file entries stored in your database,
in the official guide you say:
"...If you have over 4 billion file entries stored in your database, the
database FileId is likely to overflow. This is a monster database, but still
possible. At some point, Bacula's FileId fields will be upgraded from 32 bits
to 64 bits and this problem will go
On Wed, 6 Apr 2005, Frank Altpeter wrote:
[snip]
What I would do if I needed to manually start a given set of jobs more
than a few times: I'd write a small shell script to send the appropriate
commands to the console, like
Thought about that, and i think it will be that way for me to archive
the r
Hi ,
First let me explain what I am trying to do. I backup about 4 servers on a
daily basis with full backups once a month , differentials weekly and
incrementals daily. What I am trying to accomplish now , is using "bcopy" to
copy the daily incr volumes to an offsite disk (this is all file bas
On Apr 6, 2005 11:28 AM, Arno Lehmann <[EMAIL PROTECTED]> wrote:
> > So, this server has a lot of disk space (2.4G), currently splitted to
> > 8 partitions.
> There IS a typo, right? :-)
Uhm, yes, how did you notice? :)
> > I once build a backup system with Legato NetWorker, so i'm still
> > tryin
On Wed, 6 Apr 2005, Francesco wrote:
Could anyone tell me if i can configure bacula to reduce the bandwith usage
You could enable compression on the client, at the cost of possibly slower
operation, and slightly less efficient tape usage.
something like (in the director config):-
FileSet {
N
Could anyone tell me if i can configure bacula to reduce the bandwith usage
---
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up t
On Wed, 6 Apr 2005, Arno Lehmann wrote:
I once build a backup system with Legato NetWorker, so i'm still
trying to find out how to make things with bacula like it was with
networker ...
Without knowing Legato - I guess this approach is not the most efficient way.
It isn't. I'm using both and the Le
Hi.
michel wrote:
Hi,
the bacula storage device message is:
>
/tmp not open
/dev/nst0 not open
Device blocked
Can anybody help me as I do not find any hints in the manual or faq ?
thanks.
We will need a little more information...
What I see is that a backup device is blocked. Usually, there is a
Hi,
the bacula storage device message is:
/tmp not open
/dev/nst0 not open
Device blocked
Can anybody help me as I do not find any hints in the
manual or faq ? thanks.
I have installed bacula and run all the tape tests up
to the first backup of a small directory according
Hi.
Brice Figureau wrote:
Hi,
First: I'm (still) happily running 1.36.1, and the more I use Bacula,
the better I find it.
Great. I'm sure Kern likes to read stuff like this.
:-)
Following the good advice to have 'Rerun Failed Levels = yes' in my Job
definition along with a a 'Run Before Job' that c
Hi
Frank Altpeter wrote:
Hi there,
i'm just in the beginning to try to set up a new storage system, which
is intented to backup only on file storage devices.
So, this server has a lot of disk space (2.4G), currently splitted to
8 partitions.
There IS a typo, right?
:-)
I once build a backup system
Hi,
First: I'm (still) happily running 1.36.1, and the more I use Bacula,
the better I find it.
Following the good advice to have 'Rerun Failed Levels = yes' in my Job
definition along with a a 'Run Before Job' that check if the host is up
and running, I encountered the following problem.
I had
Hi there,
i'm just in the beginning to try to set up a new storage system, which
is intented to backup only on file storage devices.
So, this server has a lot of disk space (2.4G), currently splitted to
8 partitions.
I once build a backup system with Legato NetWorker, so i'm still
trying to find
Check that your fileset definition contain valid paths/files.
/Jens
> I've tried to backup a remote client, but i can't do it because the fd on the
> client is waiting for something but i can't understand what :
>
> Backup Job AltroClient.2005-04-05_18.19.29 waiting for Client connection.
> Ful
I've tried to backup a remote client, but i can't do it because the fd on the
client is waiting for something but i can't understand what :
Backup Job AltroClient.2005-04-05_18.19.29 waiting for Client connection.
Full Backup job AltroClient JobId=25 Volume="" device="/tmp"
Files=0 Bytes=0 By
23 matches
Mail list logo
