Re: [asterisk-ss7] Libss7

As i said - master clock problem: your Yeastar provides the master clock and both Digium and Siemens are slaves change you system.conf form "span=1,1,0,ccs,hdb3" to "span=1,0,0,ccs,hdb3" На 2022-11-23 16:33, Laura Maurizi написа: If I make a loop on the Digium, I have to set slc= 0 and the

Re: [asterisk-ss7] Libss7

If I make a loop on the Digium, I have to set slc= 0 and the channels are OK. If I connect the trunk to the Digium I loose synchronization, but if I connect to the trunk to a yeastar the synchronization is restored. El mié, 23 nov 2022 a las 9:36, Krzysztof Drewicz (< krzysztofdrew...@gmail.com>)

Re: [asterisk-ss7] Libss7

The signalling is on TS16. Actually the trunk is connected to a Yeastar and it synchronizes. When I connect the same cables to the digium, the trunk looses synchronization. El mié, 23 nov 2022 a las 9:28, Storer, Darren () escribió: > Definitely check whether signalling is actually on TS16 - quit

Re: [asterisk-ss7] Libss7

Hello, 1st check the cables, if you make a loop on your connection - does it clear alarm, both - loop in your Digium Card - should affect the green light indicator, then psychical loop towards your partner - he also should acknowledge on clearing the alerts. Those are baby steps - then - you check

Re: [asterisk-ss7] Libss7

Definitely check whether signalling is actually on TS16 - quite often it can be on TS1 when working with Siemens EWSD. Regards Darren On Mon, 21 Nov 2022 at 13:44, Kaloyan Kovachev wrote: > Your link is misaligned. Check the configuration on the other side - it > should provide the master clo

Re: [asterisk-ss7] Libss7

Your link is misaligned. Check the configuration on the other side - it should provide the master clock according to your system.conf На 2022-11-19 04:20, Laura Maurizi написа: Thanks for your time. I have put sigchan after the group definition, but the result was the same. I notice in the log

Re: [asterisk-ss7] Libss7

Thanks for your time. I have put sigchan after the group definition, but the result was the same. I notice in the logs (before and after the modification you suggested) the following message: Huh?! chan_dahdi.c: [11] Huh?! Got FISU in link state 1. I've searched the web but I couldn't find the mean

Re: [asterisk-ss7] Libss7

Hello, put sigchan after the group definition: group=1 cicbeginswith=1 channel => 1-15 cicbeginswith=17 channel => 17-31 sigchan=16 for now remove the slc line and check the configuration on the other side: if it is configured to use different slc, then add it before sigchan На 2022-11-1

Re: [asterisk-ss7] libss7 bug with more than 2 signalling links and sig_ss7.c (chan_dahdi) logging bug

Apologies; "two or more signalling links in a linkset" below should have been "more than two signalling links in a linkset" On 2020-01-09 10:38 pm, Gregory Massel wrote: Hello all, I've picked up bugs in libss7-2.0.0 and within sig_ss7.c (chan_dahdi). - Libss7-2.0.0 cannot handle changeover (

Re: [asterisk-ss7] Libss7 2.0 easy install with XiVO ISO

Great to hear! Thanks XIVO developers for providing libss7 integration! Matthew Fredrickson On Wed, Jul 20, 2016 at 5:01 AM, Mehdi Shirazi wrote: > Hi > Thanks to XIVO developers now it is easy to install > Libss7 2.0 with XiVO ISO (based on debian) > > Sprint Review 16.09 >

Re: [asterisk-ss7] Libss7 2.0 easy install with XiVO ISO

http://blog.xivo.io/sprint-review-1609.html#sprint-review-1609 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.c

Re: [asterisk-ss7] libss7 callerid presentation / usecallpres not working

Hello, there are lots of improvements since the version you are using. Please test with libss7 v2 and Asterisk 13 On 2015-10-22 18:54, Joseph Jackson wrote: Hi all, Stats: Asterisk 1.8.26.1 libss7 version: 1.0.2 DAHDI Version: 2.6.1 Echo Canceller: HWEC I'm trying to get callerid present

Re: [asterisk-ss7] libss7 callerid presentation / usecallpres not working

Hi Joseph, Check with your termination Provider and also Check your dialplan Regards Mesbah On Thu, Oct 22, 2015 at 9:54 PM, Joseph Jackson wrote: > Hi all, > > Stats: > > Asterisk 1.8.26.1 > > libss7 version: 1.0.2 > > DAHDI Version: 2.6.1 Echo Canceller: HWEC > > >

Re: [asterisk-ss7] Libss7 patch for adding Generic Number and Location Number support

Got it... Thanks for the pointers... Will try to do the same. On 27-Apr-2015 20:16, Kaloyan Kovachev wrote: > > Hi, > patches are not accepted via mail-list. > You will need to create an issue on JIRA [1] and upload your patch there > after you sign a License Agreement > > [1] https://issues

Re: [asterisk-ss7] Libss7 patch for adding Generic Number and Location Number support

Hi, patches are not accepted via mail-list. You will need to create an issue on JIRA [1] and upload your patch there after you sign a License Agreement [1] https://issues.asterisk.org On 2015-04-27 17:32, GOPI GANAPATHY wrote: Dear all, We are using the libss7 library along with asterisk fo

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

-boun...@lists.digium.com] On Behalf Of Kaloyan Kovachev Sent: Wednesday, December 17, 2014 12:24 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Hmm, you have the range defined, but probably Gregory Massel is right and

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

On Behalf Of Kaloyan Kovachev Sent: Tuesday, December 16, 2014 1:08 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Hi, please show the output of "ss7 show cics 2" On 2014-12-15 19:05, Lucian Raduc

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

day, December 16, 2014 1:08 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Hi, please show the output of "ss7 show cics 2" On 2014-12-15 19:05, Lucian Raducanu wrote: > Hi, > > Tried this co

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

k-ss7-boun...@lists.digium.com] On Behalf Of Lucian Raducanu Sent: Monday, December 15, 2014 4:26 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Thanks, system.conf is like you wrote. By mistake I paste the one used with chan_ss

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

From: asterisk-ss7-boun...@lists.digium.com [mailto:asterisk-ss7-boun...@lists.digium.com] On Behalf Of Gregory Massel Sent: Monday, December 15, 2014 4:34 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number If it&#x

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

Sent: Monday, December 15, 2014 4:26 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Thanks, system.conf is like you wrote. By mistake I paste the one used with chan_ss7.conf. I will try this config and get back

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

nt: Monday, December 15, 2014 4:08 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Hi, you have no dchan defined in system.conf so: after "span=1,1,0,ccs,hdb3" add "dchan=1" or if you are using Digium c

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

Kaloyan Kovachev Sent: Monday, December 15, 2014 4:08 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number Hi, you have no dchan defined in system.conf so: after "span=1,1,0,ccs,hdb3" add "dchan=1"

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

OF Gregory Massel SENT: Monday, December 15, 2014 1:06 PM TO: asterisk-ss7@lists.digium.com SUBJECT: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number I believe that the question was around one linkset with two DPCs and the same CIC number range. chan_ss7 refe

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

, December 15, 2014 1:06 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number I believe that the question was around one linkset with two DPCs and the same CIC number range. chan_ss7 refers to this as "combined&q

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

I believe that the question was around one linkset with two DPCs and the same CIC number range. chan_ss7 refers to this as "combined" linksets and it does NOT support combined linksets with the same CIC range on each link. It gets all confused when trying to check for idle cic's and free cic's b

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

chan_ss7 also does, you need to define two different linksets to be able to do this. Regards, Mitul Limbani, Business Head, Enterux Solutions Pvt. Ltd. 110 Reena Complex, Opp. Nathani Steel, Vidyavihar (W), Mumbai - 400 086. India http://www.enterux.com/ http://www.entvoice.com/ email: mi...@enter

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

libss7 supports this but chan_ss7 doesn't. On 2014/12/15 11:19 AM, Kaloyan Kovachev wrote: Hi, it is absolutely normal to have such setup. Each linkset has it's own CIC numbering On 2014-12-15 01:06, Lucian Raducanu wrote: Hi, Is there any possibility to set up on the same asterisk box 2 E

Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the same CIC Number

Hi, it is absolutely normal to have such setup. Each linkset has it's own CIC numbering On 2014-12-15 01:06, Lucian Raducanu wrote: Hi, Is there any possibility to set up on the same asterisk box 2 E1s with different DPCs but the same CICs? To be more explicit, the first E1 has CICs from 1

Re: [asterisk-ss7] libss7 linkset not coming up

tomer switch > defaults to 56k. Who'd uh thunk it? > > Thanks guys! > > > > From: asterisk-ss7-boun...@lists.digium.com > on behalf of Matt Fredrickson > > Sent: Monday, November 24, 2014 9:34 AM > To: asterisk-ss7@lis

Re: [asterisk-ss7] libss7 linkset not coming up

-boun...@lists.digium.com on behalf of Matt Fredrickson Sent: Monday, November 24, 2014 9:34 AM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 linkset not coming up Did you try swapping the T1s involved, verifying layer 1 problems aren't an issue, make sure that your sigchan w

Re: [asterisk-ss7] libss7 linkset not coming up

Did you try swapping the T1s involved, verifying layer 1 problems aren't an issue, make sure that your sigchan was correct? This doesn't appear to be a CIC problem yet per se - you're not able to get the signaling link to come into alignment. Matthew Fredrickson On Fri, Nov 7, 2014 at 1:07 PM, J

Re: [asterisk-ss7] libss7 linkset not coming up

nod Dharashive Sent: Saturday, November 08, 2014 7:44 PM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libss7 linkset not coming up Normally slc start from 0 Also check ss7 type of customer. Sent from my iPhone On 08-Nov-2014, at 12:37 am, Joseph Jackson mailto:jjack...@aninetworks.

Re: [asterisk-ss7] libss7 linkset not coming up

Normally slc start from 0 Also check ss7 type of customer. Sent from my iPhone > On 08-Nov-2014, at 12:37 am, Joseph Jackson wrote: > > Hey list, > > So I’m trying to get ss7 turned up between an asterisk box and a customer’s > ss7 switch. > > > Machine stats – > > Asterisk 1.8.26.1

Re: [asterisk-ss7] libss7 cluster

On 2013-07-01 10:14, Torrey Searle wrote: You might also give this experimental ss7 branch a try.   I have no idea what its status is though http://svn.digium.com/svn/libss7/team/mattf/libss7-ss7cluster/ [3] That branch won't help as it is far from completed. There is some code in isup_masq.

Re: [asterisk-ss7] libss7 cluster

You might also give this experimental ss7 branch a try. I have no idea what its status is though http://svn.digium.com/svn/libss7/team/mattf/libss7-ss7cluster/ Regards, Torrey On 29 June 2013 21:56, Marcelo Pacheco wrote: > My basic STP solution allows for sharing signalling links across >

Re: [asterisk-ss7] libss7 cluster

My basic STP solution allows for sharing signalling links across multiple asterisks, but for now each needs its own OPC. My largest need so far is 4 E1 for the same interconnect, and I can run 8E1 on a single box, so I'm for from actually needing to do it. This solution respects the minimum GPL sta

Re: [asterisk-ss7] libss7 cluster

Ok thank you for the info. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7

Re: [asterisk-ss7] libss7 cluster

It doesnt as far as I m aware. Try chan_ss7 instead. Mitul On Jun 29, 2013 1:44 AM, "mosbah abdelkader" wrote: > Hello, > > > Does libss7 supports SS7 cluster with one single PC? If yes, how to > configure it? > > > Thank you. > > -- >

Re: [asterisk-ss7] libss7 BLO / BLA issues (audio loss, call drop, asterisk hangs)

On Thu, 07 Feb 2013 11:30:22 +0200, Kaloyan Kovachev wrote: > Hi, > it seems i've messed that at some point, because it was something that > was tested and working. I will have to resurrect my test setup in order to > fix it and update reviews 2150 and 2170, but unfortunately it will not > happen

Re: [asterisk-ss7] libss7 BLO / BLA issues (audio loss, call drop, asterisk hangs)

Hi, it seems i've messed that at some point, because it was something that was tested and working. I will have to resurrect my test setup in order to fix it and update reviews 2150 and 2170, but unfortunately it will not happen in the next few weeks probably. On Wed, 06 Feb 2013 04:13:03 +0100, M

Re: [asterisk-ss7] LIBSS7 not on asterisk.org?

Quite the opposite. SS7 is used extensively on the interconnect side. The more the landline subscriber base erodes and voip subscriber base grows, the more demand there will be fore voip operators to interconnect with existing landline operators. Also, from a development perspective, those tha

Re: [asterisk-ss7] LIBSS7 not on asterisk.org?

is ss7 that interesting anymore? the landline subscriber base is dropping steadily in the US - I assume this is happening elsewhere - so that puts downward pressure on ss7 demand On Wed, Jan 9, 2013 at 2:25 PM, Marcelo Pacheco wrote: > In my opinion chan_ss7 is full of bugs, lots of crashes. >

Re: [asterisk-ss7] LIBSS7 not on asterisk.org?

In my opinion chan_ss7 is full of bugs, lots of crashes. libss7 has bugs, but it doesn't crash. libss7 has never been a mainstream digium project, due to limited need for ss7/isup versus ISDN / MFC R2. At the same time, the bugs / bad features in libss7 don't make it unuseable. My impression is tha

Re: [asterisk-ss7] LibSS7 and Sangoma A101 - SS7 HDLC Overrun Error

Hi, load/interrupt related issue may be. Check it on single card and single spam . On Fri, Oct 12, 2012 at 3:20 AM, Gregory Massel wrote: > This does not appear to be an SS7 issue. > > Check your cables and connections, particularly for loose contacts or > potential shorts (e.g. where the jumper

Re: [asterisk-ss7] libss7 IAM+SAM

Dear Kaloyan, thanks for your reply, after few hours of debugging we finally found the problem and SAM is working now. Code in libss7 and chan_dahdi is OK, but T10 timer has no default value defined, so if it is not defined by user in chan_dahdi.conf, it is treated like T10==0, so the code won

Re: [asterisk-ss7] libss7 IAM+SAM

Hi, sorry for the delayed replay (been busy with hardware probs) I hope you are not using ANSI, as it does not support overlap dialing. You should also have defined (uncommented) the ISUP T10 timer The function responsible for the release is ss7_match_extension() and it sends it in case no extens

Re: [asterisk-ss7] LibSS7 and Sangoma A101 - SS7 HDLC Overrun Error

This does not appear to be an SS7 issue. Check your cables and connections, particularly for loose contacts or potential shorts (e.g. where the jumper cable on the Krone block is making poor contact or the cable hasn't been stripped cleanly and is touching another pair or the frame itself, or

Re: [asterisk-ss7] libss7 / sip / ast 10 screening issue

Well, it's the A side anyways, in the box2. It seems chan_sip reads trustrpid=yes in the wrong way, instead of ss7 channels. On May 20, 2012, at 9:01 AM, Gregory Massel wrote: > > > On 2012/05/20 04:02 AM, Gustavo Mársico wrote: >>> results in: NoOp("SIP/switch_rba2-5c9b", "allowed_not_sc

Re: [asterisk-ss7] libss7 / sip / ast 10 screening issue

On 2012/05/20 04:02 AM, Gustavo Mársico wrote: results in: NoOp("SIP/switch_rba2-5c9b", "allowed_not_screened") Is this a NoOp in your A side? If that so, chan_sip treats sendrpid=yes, trustrpid=yes as 00 ("user provided, not verified"), according to Q.764e page 24. That can explain why

Re: [asterisk-ss7] libss7 / sip / ast 10 screening issue

> results in: NoOp("SIP/switch_rba2-5c9b", "allowed_not_screened") Is this a NoOp in your A side? If that so, chan_sip treats sendrpid=yes, trustrpid=yes as 00 ("user provided, not verified"), according to Q.764e page 24. That can explain why ss7 side is sending the IAM with CPN with this i

Re: [asterisk-ss7] libss7 / Asterisk 10 / t.38

Hi, without T.38 gateway. On Mon, Apr 23, 2012 at 8:02 PM, Kevin P. Fleming wrote: > On 04/22/2012 10:17 AM, Gregory Massel wrote: > >> Hello >> >> Is anyone using libss7 on Asterisk 10 with T.38 gateway (or without >> using T.38)? >> >> I've got two boxes on Asterisk 1.8 with libss7 (in addition

Re: [asterisk-ss7] libss7 / Asterisk 10 / t.38

On 04/22/2012 10:17 AM, Gregory Massel wrote: Hello Is anyone using libss7 on Asterisk 10 with T.38 gateway (or without using T.38)? I've got two boxes on Asterisk 1.8 with libss7 (in addition to a few with Ast 1.8 and chan_ss7) that are pretty stable and was just wondering whether it's worth u

Re: [asterisk-ss7] libss7 terminate digit

Hi, I think your link support only digits check same to switch provider . On Fri, Nov 11, 2011 at 8:13 PM, Germán I. Paul wrote: > ** > Hi. > Can someone of you tellme how can I add an N at the end of the dialed > extension using libss7? > I`ve tried adding it on the dialplan, ast

Re: [asterisk-ss7] libss7 terminate digit

or an # >> >> Regards >> Germán >> >> -- >> From: "Kaloyan Kovachev" >> Sent: Friday, November 11, 2011 12:58 PM >> To: >> Subject: Re: [asterisk-ss7] libss7 terminate digit >>

Re: [asterisk-ss7] libss7 terminate digit

dial(DAHDI/g0/${EXTEN}) > > Now, that you have said me that I can`t send an N, at the en of the dial, I > want to send an * or an # > > Regards > Germán > > -- > From: "Kaloyan Kovachev" > Sent: Friday, November

Re: [asterisk-ss7] libss7 terminate digit

=> _X.,1,dial(DAHDI/g0/${EXTEN}) Now, that you have said me that I can`t send an N, at the en of the dial, I want to send an * or an # Regards Germán -- From: "Kaloyan Kovachev" Sent: Friday, November 11, 2011 12:58 PM To: Subject

Re: [asterisk-ss7] libss7 terminate digit

Hi, there is no such thing like N with SS7 - 0123456789ABCD*# are the possible options with '*' = 'e' and '#' = 'f' On Fri, 11 Nov 2011 11:43:54 -0300, "Germán I. Paul" wrote: > Hi. > Can someone of you tellme how can I add an N at the end of the dialed > extension using libss7? > I`ve t

Re: [asterisk-ss7] libss7 terminate digit

You can't. N is not a valid hexadecimal digit. Gustavo On Nov 11, 2011, at 11:43 AM, Germán I. Paul wrote: > Hi. > Can someone of you tellme how can I add an N at the end of the dialed > extension using libss7? > I`ve tried adding it on the dialplan, asterisk execute that OK, but when I >

Re: [asterisk-ss7] libss7 retransmit error

Hi , use asterisk-1.6.X and try this . It si working with vodaphone 4 links with multiple acp and dcp . [channels] ;rxwink=300 language=en context=apex callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocanc

Re: [asterisk-ss7] libss7 retransmit error

I forgot to mention that the old chan_ss7/ast1.4 is running on 2x Digium 4xE1 cards while the libss7/ast1.8 is running 1x Sangoma A108. It seems the problem may rest in the wanpipeX.conf files... On 10/22/2011 3:33 PM, Gregory Massel wrote: Hello I'm struggling to move a chan_ss7/ast 1.4 setu

Re: [asterisk-ss7] libss7 debug output to cap/pcap

you can get the tool here https://issues.asterisk.org/view.php?id=18362 Torrey On 29 June 2011 13:36, Robert Thomas wrote: > U can use the dahdi-pcap utility to make a CAP of the d channel > > Sent from my iPhone > > On Jun 29, 2011, at 5:28, "Nikolay Tsanov" wrote: > >> Hello, >> >> Is it pos

Re: [asterisk-ss7] libss7 debug output to cap/pcap

U can use the dahdi-pcap utility to make a CAP of the d channel Sent from my iPhone On Jun 29, 2011, at 5:28, "Nikolay Tsanov" wrote: > Hello, > > Is it possible to save the output of "ss7 debug linkset x" command to pcap/cap > file which can be analyzed in wireshark? > > Best Regards, > > N

Re: [asterisk-ss7] libss7 debug output to cap/pcap

yes, please refer this: http://www.voip-info.org/wiki/view/Asterisk+ss7+commands use the command: ss7 dump start [in|out|both] [fisu] [lssu] [msu]This starts the chan_ss7 module producing a PCAP dump of the data sentand/or received on the SS7 link. Format is suitable for display inwireshark Wi

Re: [asterisk-ss7] libss7 and sam messages

Hi Davio. But asterisk 1.6.0.28 has some issue with dtmf on dialed out calls, which it has been solved on 1.6.2.X. On 1.6.2.18 we compiled with several warnings (aviso) and errors --->chan_dahdi.c:12234: error: demasiados argumentos para la funcion "isup_cgba"

Re: [asterisk-ss7] libss7 and sam messages

Hi Rafael I am using Asterisk 1.6.0.28 with Dahdi 2.4.0 and Attila's Libss7 version ( SVN https://observer.router.hu/repos_pub/libss7/trunk ) and it handles SAM messages perfectly. It is not compatible with Asterisk 1.8. Best Regards Davíð Fannar Gunnarsson dav...@hringdu.is http://www.hri

Re: [asterisk-ss7] libss7 and sam messages

On 2011-06-13, at 22:14, Rafael Visser wrote: > Hi Guys: > I am trying to get 20 digits of the dialed number, but libss7 can't hadle sam > messages. > Am i right? > How can i resolve this issue? As per ITU the maximu length of the number should not exceed 16 digits. If you're doing ITU ISUP,

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

From: asterisk-ss7-boun...@lists.digium.com [mailto:asterisk-ss7-boun...@lists.digium.com] On Behalf Of Marcelo Pacheco Sent: Thursday, January 27, 2011 7:44 AM To: asterisk-ss7@lists.digium.com Subject: Re: [asterisk-ss7] libSS7 and TDMoE Possible? > TDMoE generates 1000 interrupts/second j

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

To clarify, I'm talking about TDMoE between two asterisks. If you want to use TDMoE to use ethernet based E1 interfaces, you'll need to see how that hardware works. This channels per span stuff needs to be accepted from both sides. Marcelo Pacheco wrote: > TDMoE generates 1000 interrupts/second ju

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

TDMoE generates 1000 interrupts/second just like any other DAHDI card. Interrupts is not the issue. 1000 irqs/sec is doable with much older processors. What you need to worry about is echo canceling, transcoding, and other issues. Also, a single TDMoE span can be used for at least 120 channels. TDM

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

Thanks for the info. What about CPU interrupts? I have read TDMoE generate quite a lot of interrupts that could cause the CPU no starve. I saw the 8 PRI redfone gateway. Do you think I could run two for a total of 16 E1 out of a XEON, or perhaps 2 XEON MB. On Thu, Jan 27, 2011 at 5:41 AM, Godson

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

Last year, I have successfully tested chan_ss7 with 4 E1 phone bridge. So its certainly doable . What I did was purely a test setup throwing calls from one E1 port to other E1 port connected in loop back -- Thanks & Regards, Godson Gera On Thu, Jan 27, 2011 at 9:25 AM, Robert Thomas wrote: >

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

I have tested chan_ss7 using TDMoE perfectly. It was 2 years ago, there where issues using purely local TDMoE configuration (without sending packets between two machines) but that particular bug was fixed in DAHDI just a few months later. ISDN works as well. I created a 100 channel span for ss7 use

Re: [asterisk-ss7] libSS7 and TDMoE Possible?

2011/1/27 Robert Thomas : > Hi Gents, > I was wondering if something has tried to interact Libss7 and TDMoE. > We are working on getting up a big linkset with our TELCO ( up to 24 E1s) > and would like to host the cards on multiple servers. We are not sure even a > modern XEON 12 core 3.33Ghz CPU c

Re: [asterisk-ss7] libss7 trunk version

dahdi-linux-complete-2.3.0.1+2.3.0 Le 02/09/2010 08:38, bipin singh a écrit : Which version dahdi u use ? On Wed, Sep 1, 2010 at 3:50 PM, Haoyu SHEN > wrote: Hi, I use libss7 revision 288, there is always the problem with Asterisk 1.6.0x. chan_dahdi.c:

Re: [asterisk-ss7] libss7 trunk version

Which version dahdi u use ? On Wed, Sep 1, 2010 at 3:50 PM, Haoyu SHEN wrote: > Hi, I use libss7 revision 288, there is always the problem with Asterisk > 1.6.0x. > > chan_dahdi.c: In function ‘ss7_reset_linkset’: > chan_dahdi.c:9680: warning: passing argument 2 of ‘isup_grs’ makes pointer > fr

Re: [asterisk-ss7] libss7 trunk version

Hi, I use libss7 revision 288, there is always the problem with Asterisk 1.6.0x. chan_dahdi.c: In function ‘ss7_reset_linkset’: chan_dahdi.c:9680: warning: passing argument 2 of ‘isup_grs’ makes pointer from integer without a cast chan_dahdi.c:9680: error: too many arguments to function ‘isup_

Re: [asterisk-ss7] libss7 trunk version

Hi use asterisk 1-6.0 it is work . On Mon, Aug 23, 2010 at 3:47 PM, Haoyu SHEN wrote: > Hi, > > Which Asterisk version I can use with libss7 trunk. I have some > compilation errors like > > chan_dahdi.c:11895: error: too many arguments to function ‘isup_cgba’ > > with Asterisk 1.6.2.11 > > Regar

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

duda. > > Muchas gracias y saludos. > > Ignacio Zamora > > > > __ > From: jantil...@ticom.co.cr > To: asterisk-ss7@lists.digium.com > Date: Mon, 26 Jul 2010 13:01:47 -0600 > Subject: Re: [asterisk-ss7] libss7-ss7cluster

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

objetivo? Espero me ayudes a resolver esta duda. Muchas gracias y saludos. Ignacio Zamora From: jantil...@ticom.co.cr To: asterisk-ss7@lists.digium.com Date: Mon, 26 Jul 2010 13:01:47 -0600 Subject: Re: [asterisk-ss7] libss7-ss7cluster asterisk problem Hi, [linkset-ls1

Re: [asterisk-ss7] Libss7 does not propagate SS7_* variables to Asterisk?

On 2010-07-27, at 10:18, jarek.jarzebow...@gmail.com wrote: > Hi all, > > i have just launched Asterisk + LibSS7. Linkset is up, connections are > working just fine. > Unfortunately, on SS7 channel all SS7_* variables are always equals to ZERO. > > Is there any possibility to make it works? H

Re: [asterisk-ss7] Libss7 does not propagate SS7_* variables to Asterisk?

which version u use ? On Tue, Jul 27, 2010 at 1:48 PM, wrote: > Hi all, > > i have just launched Asterisk + LibSS7. Linkset is up, connections are > working just fine. > Unfortunately, on SS7 channel all SS7_* variables are always equals to > ZERO. > > Is there any possibility to make it works?

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

> > Podrías mostrarme tu ss7.conf por favor > > Please show me your ss7.conf. > > Thanks > > > > > __ > From: nachofxciriji...@hotmail.com > To: asterisk-ss7@lists.digium.com > Date: Mon, 26 Jul 2010 13:51:37

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

Jorge: Podrías mostrarme tu ss7.conf por favor Please show me your ss7.conf. Thanks From: nachofxciriji...@hotmail.com To: asterisk-ss7@lists.digium.com Date: Mon, 26 Jul 2010 13:51:37 + Subject: Re: [asterisk-ss7] libss7-ss7cluster asterisk problem OK, Gracias Jorge

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

OK, Gracias Jorge, utilizaré chan_ss7. Lastima que la libss7-cluster no tenga un soporte o alguien que la utilice. Saludos From: jantil...@ticom.co.cr To: asterisk-ss7@lists.digium.com Date: Fri, 23 Jul 2010 15:21:49 -0600 Subject: Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

ium.com > Date: Wed, 21 Jul 2010 13:58:00 +0000 > Subject: Re: [asterisk-ss7] libss7-ss7cluster asterisk problem > > nobody can help me? > > this is a good opportunity to test the lib. > > > __ >

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

maybe I will use chan_ss7 for my asterisk cluster. From: nachofxciriji...@hotmail.com To: asterisk-ss7@lists.digium.com Date: Wed, 21 Jul 2010 13:58:00 + Subject: Re: [asterisk-ss7] libss7-ss7cluster asterisk problem nobody can help me? this is a good opportunity to test the lib

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

nobody can help me? this is a good opportunity to test the lib. From: nachofxciriji...@hotmail.com To: asterisk-ss7@lists.digium.com Date: Thu, 15 Jul 2010 22:07:18 + Subject: [asterisk-ss7] libss7-ss7cluster asterisk problem Hi to all, I am trying to use libss7-cluster, no problem

Re: [asterisk-ss7] Libss7, call get answered but no voice

On 7/19/10 1:35 PM, bipin singh wrote: [snip] > linkset=1 > pointcode= > adjpointcode= > defaultdpc= > ss7_called_nai=national > ss7_calling_nai=national > networkindicator=national > sigchan=16 > cicbeginswith=1 > channel=1-15 > cicbeginswith=17 > channel=17-31 > ;cicbeginswith=32 >

Re: [asterisk-ss7] libss7-ss7cluster asterisk problem

anybody help me? From: nachofxciriji...@hotmail.com To: asterisk-ss7@lists.digium.com Date: Thu, 15 Jul 2010 22:07:18 + Subject: [asterisk-ss7] libss7-ss7cluster asterisk problem Hi to all, I am trying to use libss7-cluster, no problem when I compile, but when I try to compile Aster

Re: [asterisk-ss7] Libss7, call get answered but no voice

e can you send us the configuration with asterisk 1.6.0, > > Thank's > > > > --- En date de : *Mer 14.7.10, bipin singh * a > écrit : > > > De: bipin singh > Objet: Re: [asterisk-ss7] Libss7, call get answered but no voice > À: asterisk-ss7@lists.digium.c

Re: [asterisk-ss7] Libss7, call get answered but no voice

Please can you send us the configuration with asterisk 1.6.0,   Thank's   --- En date de : Mer 14.7.10, bipin singh a écrit : De: bipin singh Objet: Re: [asterisk-ss7] Libss7, call get answered but no voice À: asterisk-ss7@lists.digium.com Date: Mercredi 14 juillet 2010, 6h44 Hi

Re: [asterisk-ss7] Libss7, call get answered but no voice

Hi use asterisk-1.6.0 all thing is working on this version . On Sun, Jul 11, 2010 at 1:15 PM, Basil Hweij wrote: > Dear all, > > > > I setup libss7 1.0.2 with asterisk 1.6.2.8 and link set is up and the call > get answered but they hear nothing. > > > > Please advice us... > > -- > ___

Re: [asterisk-ss7] Libss7, call get answered but no voice

If you get audio after you press some DTMF - take a look at: http://lists.digium.com/pipermail/asterisk-ss7/2010-April/003613.html On Sun, 11 Jul 2010 12:57:57 +0500, Wasim Baig wrote: > On Sun, Jul 11, 2010 at 12:45, Basil Hweij wrote: > >> Dear all, >> >> >> >> I setup libss7 1.0.2 with aste

Re: [asterisk-ss7] Libss7, call get answered but no voice

On Sun, Jul 11, 2010 at 12:45, Basil Hweij wrote: > Dear all, > > > > I setup libss7 1.0.2 with asterisk 1.6.2.8 and link set is up and the call > get answered but they hear nothing. > do you hear anything? or neither party does? probably a cic mismatch first check dahdi_monitor on the cic you

Re: [asterisk-ss7] libss7 with sangoma card

Hi install proper card and check card status also check link are coming or not . if card span show green the try to configure chan_ss7.conf proper acp and dcp with your telco On Mon, Jul 5, 2010 at 5:57 PM, ndiaye barham wrote: > Hi all > > I need help ! > > i have some problem wi

Re: [asterisk-ss7] Libss7 + DSX100

Hello Jorge! This is it. There was a mistake in the channel configuration. Now all works fine. So, just more one information about linkset. In the Asterisk CLI I have this status: asterisk*CLI>ss7 show linkset 1 SS7 linkset 1 status: Down but the mtp2 is "link up": [Jul 8 00:22:58] VERBOSE[41

Re: [asterisk-ss7] Libss7 + DSX100

Hi Muriel, First, in system.conf configuration you are defining a dchannel for each E1, and in the chan_dahdi.conf you use only the first one. I want to ask you why are you using one sigchan for each E1? you can use 1 sigchan for all E1 Also there's a mistake in the channel configuration on chan

Re: [asterisk-ss7] Libss7 + DSX100

Hi! After more tests, Dahdi and Asterisk startup. But I receive call just in the first E1. chan_dahdi.conf: [channels] context=recebe ss7type=itu signalling=ss7 ss7_called_nai=dynamic ss7_calling_nai=dynamic networkindicator=national linkset=1 pointcode=2008 defaultdpc=2090 adjpointcode=2090

Re: [asterisk-ss7] Libss7 + DSX100

Hi, Paste your system.conf and chan_dahdi.conf here. Thanks Mesbah On Tue, Jul 6, 2010 at 12:21 AM, Muriel Arneiro wrote: > Hello! > > I'm integrate a DSX100 SP Tel with Asterisk 1.6.2 + libss7 version: 1.0.2. > > But, I have some troubles: > > 1 - Second E1 has a CIC begin 33, but DAHDI doe

  1   2   3   4   >