Thanks,
system.conf is like you wrote. By mistake I paste the one used with
chan_ss7.conf.
I will try this config and get back with the results.
Regards,
Lucian
-----Original Message-----
From: asterisk-ss7-boun...@lists.digium.com
[mailto:asterisk-ss7-boun...@lists.digium.com] On Behalf Of Kaloyan Kovachev
Sent: Monday, December 15, 2014 4:08 PM
To: asterisk-ss7@lists.digium.com
Subject: Re: [asterisk-ss7] libss7 - two linksets with different DPCs but the
same CIC Number
Hi,
you have no dchan defined in system.conf so:
after "span=1,1,0,ccs,hdb3" add "dchan=1" or if you are using Digium card
"mtp2=1" and same for the other port but for 32 and exclude them from bchans:
span=1,1,0,ccs,hdb3
mtp2=1
bchan=2-31
span=2,0,0,ccs,hdb3
mtp2=32
bchan=33-62
also in chan_dahdi.conf remove switchtype (it's ss7 not PRI), put group before
the linkset and sigchan after the channels:
language=en
signalling=ss7
ss7type=itu
ss7_called_nai=national
ss7_calling_nai=national
;;;;;;;;;;;;;;;;;;;;;;;;;;
group = 1
linkset = 1
networkindicator=national
context=from-pstn
pointcode = 2162
adjpointcode = 2
defaultdpc = 140
cicbeginswith = 2
channel = 2-31
sigchan = 1
;;;;;;;;;;;;;;;;;;;;;;;;;;
group = 2
linkset = 2
networkindicator=national
context=from-pstn
pointcode = 2162
adjpointcode = 18
defaultdpc = 150
cicbeginswith = 2
channel = 33-62
sigchan = 32
On 2014-12-15 15:30, Lucian Raducanu wrote:
Hi,
At this moment I'm using chan_ss7 for this setup with two linksets.
There is no problem in having same CIC numbering on each E1. There is
a problem with CGB and there is no BLO command I can use.
That is why I'm trying to config libss7. But I cannot find the proper
config in order to have same CIC numbering on the 2 E1s. The error I
get is:
WARNING[21451] sig_ss7.c: Linkset 1: SS7 RSC requested on unconfigured
CIC/DPC 2/150
WARNING[21451] sig_ss7.c: Linkset 1: SS7 RSC requested on unconfigured
CIC/DPC 3/150
and so on…
The linksets are combined.
Here is my dahdi system.conf:
loadzone = fr
defaultzone = fr
span=1,1,0,ccs,hdb3
bchan=1-31
#echocanceller=mg2,1-31
span=2,0,0,ccs,hdb3
bchan=32-62
#echocanceller=mg2,32-62
And my chan_dahdi.conf:
[trunkgroups]
annels]
language=en
context=from-pstn
switchtype=euroisdn
signalling = ss7
ss7type = itu
ss7_called_nai = national
ss7_calling_nai = national
linkset = 1
pointcode = 2162
adjpointcode = 2
defaultdpc = 140
cicbeginswith = 2
networkindicator=national
sigchan = 1
channel = 2-31
group = 1
context = from-pstn
linkset = 2
pointcode = 2162
adjpointcode = 18
defaultdpc = 150
cicbeginswith = 2
networkindicator=national
sigchan = 32
channel = 33-62
group = 2
context = from-pstn
Regards,
Lucian
FROM: asterisk-ss7-boun...@lists.digium.com
[mailto:asterisk-ss7-boun...@lists.digium.com] ON BEHALF OF Gregory
Massel
SENT: Monday, December 15, 2014 1:06 PM
TO: asterisk-ss7@lists.digium.com
SUBJECT: Re: [asterisk-ss7] libss7 - two linksets with different DPCs
but the same CIC Number
I believe that the question was around one linkset with two DPCs and
the same CIC number range.
chan_ss7 refers to this as "combined" linksets and it does NOT support
combined linksets with the same CIC range on each link.
It gets all confused when trying to check for idle cic's and free
cic's back to the idle list as it doesn't match both the CIC and DPC,
only the CIC.
It will work if the linkset is not combined, however, if you receive
signalling from an STP via the one signalling link in respect of CIC's
related to the other link, it will get confused and such an
installation is quite common where there is an STP on the other end.
By contrast, libss7 handles this situation perfectly.
PS. Not knocking chan_ss7; it's great. Just saying that, for the
situation described below, it will not work properly.
On 2014/12/15 12:20 PM, Mitul Limbani wrote:
chan_ss7 also does, you need to define two different linksets to be
able to do this.
Regards,
Mitul Limbani,
Business Head,
Enterux Solutions Pvt. Ltd.
110 Reena Complex, Opp. Nathani Steel, Vidyavihar (W), Mumbai - 400
086. India http://www.enterux.com/ [1] http://www.entvoice.com/ [2]
email: mi...@enterux.in
DID: +91-22-71967196
Cell: +91-9820332422
On Mon, Dec 15, 2014 at 3:49 PM, Gregory Massel <g...@csurf.co.za>
wrote:
libss7 supports this but chan_ss7 doesn't.
On 2014/12/15 11:19 AM, Kaloyan Kovachev wrote:
Hi,
it is absolutely normal to have such setup. Each linkset has it's own
CIC numbering
On 2014-12-15 01:06, Lucian Raducanu wrote:
Hi,
Is there any possibility to set up on the same asterisk box 2 E1s with
different DPCs but the same CICs? To be more explicit, the first E1
has CICs from 1 to 31 and the second E1 also has CICs from 1 to 31.
First CIC on each E1 is the signaling link.
On December 2007 there was reported the same problem, but no solution.
Regards,
Lucian
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com [3]
--
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7 [4]
Links:
------
[1] http://www.enterux.com/
[2] http://www.entvoice.com/
[3] http://www.api-digital.com
[4] http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
