As i said - master clock problem: your Yeastar provides the master clock
and both Digium and Siemens are slaves
change you system.conf
form "span=1,1,0,ccs,hdb3"
to "span=1,0,0,ccs,hdb3"
На 2022-11-23 16:33, Laura Maurizi написа:
If I make a loop on the Digium, I have to set slc= 0 and the channels
are OK. If I connect the trunk to the Digium I loose synchronization,
but if I connect to the trunk to a yeastar the synchronization is
restored.
El mié, 23 nov 2022 a las 9:36, Krzysztof Drewicz
(<krzysztofdrew...@gmail.com>) escribió:
Hello,
1st check the cables, if you make a loop on your connection - does it
clear alarm, both - loop in your Digium Card - should affect the green
light indicator, then psychical loop towards your partner - he also
should acknowledge on clearing the alerts.
Those are baby steps - then - you check the clock, then - you must
agree on SS7/C7 connection details, starting from time slots as "0" is
considered "1" on some systems.
Anyway - this technology is rather obsolete now and even finding a good
signalization analyzer or even a E1/T1 connection analyzer (low level
link - layer 2 i would say) is hard to find and rather expensive.
You must be aware that - 4 electrical lines in cables are being used
and every single one of them needs to be good (this is not ethernet,
you can't mix pairs...)
śr., 23 lis 2022 o 13:28 Storer, Darren <darren.sto...@gmail.com>
napisał(a):
Definitely check whether signalling is actually on TS16 - quite often
it can be on TS1 when working with Siemens EWSD.
Regards
Darren
On Mon, 21 Nov 2022 at 13:44, Kaloyan Kovachev <kkovac...@varna.net>
wrote: Your link is misaligned. Check the configuration on the other
side - it
should provide the master clock according to your system.conf
На 2022-11-19 04:20, Laura Maurizi написа:
Thanks for your time. I have put sigchan after the group definition,
but the result was the same. I notice in the logs (before and after
the
modification you suggested) the following message:
Huh?! chan_dahdi.c: [11] Huh?! Got FISU in link state 1. I've searched
the web but I couldn't find the meaning of this message.
El vie, 18 nov 2022 a las 8:40, Kaloyan Kovachev
(<kkovac...@varna.net>) escribió:
Hello,
put sigchan after the group definition:
group=1
cicbeginswith=1
channel => 1-15
cicbeginswith=17
channel => 17-31
sigchan=16
for now remove the slc line and check the configuration on the other
side: if it is configured to use different slc, then add it before
sigchan
На 2022-11-18 05:20, Laura Maurizi написа:
I have a Digium TE122 whith one span connected to Siemens switch. As
I
got the message "ERROR[20309] chan_dahdi.c: [1] Received message for
slc 0x1, but we are 0x0. Dropping" I changed slc to 1 in
chan_dahdi.conf. But now I get this message; "ERROR[20309]
chan_dahdi.c: [1] Q707 T1 timer expired 2nd time on link SLC: 0 PC:
10". The operating system is debian 11, asterisk version is 16.29.0,
dahdi version is dahdi-2.11.1.0.20170917~dfsg-7.4.
This is the result I get with ss7 show linkset 1:
SS7 flags: 0x9
SS7 linkset 1 status: Down
SS7 calling nai: -1
SS7 called nai: -1
SS7 nationalprefix: 0
SS7 internationalprefix: 00
SS7 unknownprefix:
SS7 networkroutedprefix:
SS7 subscriberprefix:
Switch type: ITU
Our point code: 20
SLS shift: 0
numlinks: 1
numsps: 1
---------------------------------
Adjacent SP PC: 10 STATE: DOWN
TRA: T19: not running T21: not running
Routes:
DPC State T6 T10
Link ADJ_PC:SLC: 10:1 NetMngSLS: 0
State: INSERVICE, DOWN
STD Test: failed
Got, sent :
Inhibit:
Changeover: NO
Tx buffer: 0
Tx queue: 0
Retrans pos 0
CO buffer: 0
CB buffer: 0
Last FSN: 0
MTP3timers: Q707_T1(1s)
This is the message I get in the log:
[Nov 10 06:39:05] ERROR[20525] chan_dahdi.c: [1] Q707 T1 timer
expired
2nd time on link SLC: 1 PC: 10
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] Len = 20 [ 91 87
11
81 0a 00 05 00 11 a0 32 35 36 34 32 38 36 32 38 38 ]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] FSN: 7 FIB 1
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] BSN: 17 BIB 1
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] >[10:1] MSU
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] [ 91 87 11 ]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] Network
Indicator:
2
Priority: 0 User Part: STD_TEST (1)
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] [ 81 ]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] OPC 20 DPC 10 SLS
0
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] [ 0a 00 05 00 ]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] H0: 1 H1: 1
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] [ 11 a0 32 35 36
34
32 38 36 32 38 38 ]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] Len = 3 [ 91 87
00
]
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] FSN: 7 FIB 1
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] BSN: 17 BIB 1
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1] >[10:1] FISU
[Nov 10 06:39:05] VERBOSE[20525] chan_dahdi.c: [1]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] Len = 20 [ 91 88
11
81 0a 00 05 00 11 a0 32 35 36 34 32 38 36 32 38 38 ]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] FSN: 8 FIB 1
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] BSN: 17 BIB 1
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] >[10:1] MSU
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] [ 91 88 11 ]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] Network
Indicator:
2
Priority: 0 User Part: STD_TEST (1)
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] [ 81 ]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] OPC 20 DPC 10 SLS
0
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] [ 0a 00 05 00 ]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] H0: 1 H1: 1
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1] [ 11 a0 32 35 36
34
32 38 36 32 38 38 ]
[Nov 10 06:39:09] VERBOSE[20525] chan_dahdi.c: [1]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] Len = 14 [ 88 92
0b
85 14 80 02 10 01 00 17 01 01 0e ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] FSN: 18 FIB 1
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] BSN: 8 BIB 1
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] <[10:1] MSU
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 88 92 0b ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] Network
Indicator:
2
Priority: 0 User Part: ISUP (5)
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 85 ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] OPC 10 DPC 20 SLS
1
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 14 80 02 10 ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] CIC: 1
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 01 00 ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] Message Type:
GRS(0x17)
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 17 ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] --VARIABLE LENGTH
PARMS[1]--
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] Range and status:
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] Range: 14
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1] [ 01 0e ]
[Nov 10 06:39:12] VERBOSE[20525] chan_dahdi.c: [1]
[Nov 10 06:39:12] ERROR[20525] chan_dahdi.c: [1] Got ISUP message on
link while MTP3 state is not UP!
I attatch the configuration files.
Thanks in advance.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7 --
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7