On Wed, Jan 13, 2021 at 09:07:45PM +, tech-lists wrote:
On Wed, Jan 13, 2021 at 05:36:02PM +0100, Mark Kettenis wrote:
Also note that support for the temperature sensor in ACPI mode was
added recently, after the 6.8 release.
Ah. I didn't fully appreciate this when I first read your messa
On Wed, Jan 13, 2021 at 05:36:02PM +0100, Mark Kettenis wrote:
In device tree mode serial output will be the default. You can switch
to HDMI (what we call glass console) by typing
set tty fb0
at the boot> prompt. You can make this permanent by adding this
command to a /etc/boot.conf file.
> Date: Wed, 13 Jan 2021 02:13:42 +
> From: tech-lists
>
> On Wed, Jan 13, 2021 at 03:19:35PM +, Stuart Henderson wrote:
> >Set your uefi firmware to device tree or acpi + device tree mode.
>
> Unfortunately neither of those modes worked. It sits at the part before it's
> cleared the la
On Wed, Jan 13, 2021 at 03:19:35PM +, Stuart Henderson wrote:
Set your uefi firmware to device tree or acpi + device tree mode.
Unfortunately neither of those modes worked. It sits at the part before it's
cleared the large raspberry image, after the first two lines of booting
output. Noth
On Wed, Jan 13, 2021 at 03:19:35PM +, Stuart Henderson wrote:
Set your uefi firmware to device tree or acpi + device tree mode.
ok thanks I'll try that and get back with results
--
J.
Set your uefi firmware to device tree or acpi + device tree mode.
On 2021/01/13 01:25, tech-lists wrote:
> On Wed, Jan 13, 2021 at 03:56:22PM +0100, Mark Kettenis wrote:
> > > Date: Wed, 13 Jan 2021 01:06:30 +
> > > From: tech-lists
> > >
> > > Hi,
> > >
> > > On Wed, Jan 13, 2021 at 10:43:
On Wed, Jan 13, 2021 at 03:56:22PM +0100, Mark Kettenis wrote:
Date: Wed, 13 Jan 2021 01:06:30 +
From: tech-lists
Hi,
On Wed, Jan 13, 2021 at 10:43:57PM +0800, Archimedes Gaviola wrote:
>Hi,
>
>Can you try this in your system?
>
>openbsdrpi4b2# sysctl -a | grep temp0
>hw.sensors.bcmtmon0.t
> Date: Wed, 13 Jan 2021 01:06:30 +
> From: tech-lists
>
> Hi,
>
> On Wed, Jan 13, 2021 at 10:43:57PM +0800, Archimedes Gaviola wrote:
> >Hi,
> >
> >Can you try this in your system?
> >
> >openbsdrpi4b2# sysctl -a | grep temp0
> >hw.sensors.bcmtmon0.temp0=55.99 degC
>
> obsd# sysctl -a | gr
Hi,
On Wed, Jan 13, 2021 at 10:43:57PM +0800, Archimedes Gaviola wrote:
Hi,
Can you try this in your system?
openbsdrpi4b2# sysctl -a | grep temp0
hw.sensors.bcmtmon0.temp0=55.99 degC
obsd# sysctl -a | grep temp0
obsd#
--
J.
Hi,
Can you try this in your system?
openbsdrpi4b2# sysctl -a | grep temp0
hw.sensors.bcmtmon0.temp0=55.99 degC
Thanks and best regards,
Archimedes
On Wed, Jan 13, 2021 at 10:28 PM tech-lists wrote:
> Hello,
>
> I'm new to modern openbsd (having last used it in a router setting
> back in 2000
10 matches
Mail list logo
