015000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Any help will be very appreciated... :c)
Thank you very much.
Alex
---
This SF.NET email is sponsored by: FREE SSL Guide from Thawte
are yo
mixer-oss failed
/lib/modules/2.4.20/kernel/sound/acore/snd.o: invalid parameter
parm_snd_major
/lib/modules/2.4.20/kernel/sound/acore/snd.o: insmod
/lib/modules/2.4.20/kernel/sound/acore/snd.o failed
/lib/modules/2.4.20/kernel/sound/acore/snd.o: insmod snd-seq-oss failed
Can anyone help please?
e modules, i have an error
> message i don't understand...
Sorry for this message, i just found out what it was...
Alex
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http:
hable) [size=4K]
Capabilities: [dc] Power Management version 2
Thanx for the help.
Alex
---
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www
Subsystem: Compaq Computer Corporation: Unknown device 00b0
Flags: medium devsel, IRQ 5
I/O ports at 8400 [size=256]
Memory at f4015000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Thanx for the help.
Alex
Hi,
I run a Debian/sid on an Asus P5KPL-SE mainboard, the snd-hda-intel seem to
work fine, ever if it run with guess method:
Unknown hardware: "HDA-Intel" "Realtek ALC887"
"HDA:10ec0887,104383bc,00100202" "0x1043" "0x83bc"
Hardware is initialized using a guess method
The only annoying thing is
Hi Paul,
> Dear Alex,
>
> Am Sonntag, den 03.07.2011, 21:00 +0200 schrieb Alex:
> > I run a Debian/sid on an Asus P5KPL-SE mainboard, the snd-hda-intel seem
> > to work fine, ever if it run with guess method:
> >
> > Unknown hardware: "HDA-Intel"
different pieces of hardware.
Your hints will be greatly appreciated,
Alex
^ To be specific, I need Asterisk itself to act as a SIP client, and
it can be done either via chan_alsa or chan_oss; the former does not
support video, therefore I resor
ity settings. I still had the green
and red lights lit when the cable was set to the correct polarity and still
no sound. When I reversed the polarity again, there was the same very faint
distorted music after several seconds of silence, and still no lights.
Can anyone help me?
liant devices that are capable of sending out MMC to keep
other devices in sync. You might have a multi-track recorder and you
want to be able to start, stop, or fast-forward JACK-based programs
such as Rosegarden, Hydrogen, and Ardour.
Enjoy,
--
e machine, so that my 32 bit
programs (such as Skype) would use 32 bit version?
Am using RedHat ES 4.5: 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007
x86_64 x86_64 x86_64 GNU/Linux
Best Regards,
Alex
--
The Pla
luate) function snd_func_refer returned
error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or
directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
Does anyone have any ideas what
sion by ioclt32 is not supported.
Does anyone have any ideas what am I doing wrong? Cheers!
Regards,
Blaz
On Thu, Feb 4, 2010 at 8:09 AM, Axel Bergerhoff <
axelbergerh...@compuserve.com> wrote:
> Am Mittwoch, 3. Februar 2010 schrieb Alex Rixhardson:
> > Hi guys,
> >
>
ur help!
>
If your rotary controls are anything like the rotary controller on my Boss
BR-900, then they'll send MMC locate commands which are also handled by
QJackMMC.
Hope that's what your looking for!
Regards,
-- Alex
---
QJackMMC is a Qt based program that can connect to a device or program that
emits MIDI Machine Control (MMC) and allow it to drive JACK transport, which
in turn can control other programs like Ardour, Hydrogen, and Rosegarden.
JackCtlMMC is a slightly simpler command-line version of QJackMMC.
Vers
need more info, or think I should post to alsa-devel, please just
say.
Alex
--
ALEX|X3JA
[EMAIL PROTECTED]
ICQ: 1523424
MSN: [EMAIL PROTECTED]
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
ayback
24: [0- 0]: digital audio capture
33: : t
/proc/asound/oss-devices:
0: [0- 0]: mixer
3: [0- 3]: digital audio
/proc/asound/timers:
G0: system timer : 1.0us (1000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
/proc/asound/pcm:
00-00: VI
P0-3-12: PCM playback 0-3-12 : SLAVE
P0-3-14: PCM playback 0-3-14 : SLAVE
/proc/asound/pcm:
00-00: emu10k1 : EMU10K1 : playback 32 : capture 1
00-01: emu10k1 mic : EMU10K1 MIC : capture 1
00-02: emu10k1 efx : EMU10K1 EFX : capture 1
00-03: emu10k1 : EMU10K1 FX8010 : playback 8
Alex
: codec_valid: codec 0 is not valid [0xa6]
over 100 times.
I don't know what this means really, but it looks bad :o)
Cheers,
Alex
--
ALEX|X3JA
[EMAIL PROTECTED]
ICQ: 1523424
MSN: [EMAIL PROTECTED]
___
Alsa-user mailing list
[
1.o
> [Unresolved symbols errors]
Use `modprobe snd-emu10k1`. There are several modules that snd-emu10k1
needs loaded first (like snd), insmod will not automatically load these,
however modprobe will.
That should do it, not that I'm an expert.
Alex
--
ALEX|X3JA
[EMAIL PROTEC
ste my time.
Can anyone point me to some documentation for what follows? What
exactly is AC'97? What does the codec do? What part does the 8233 chip
play in the sound system (if any)? Is it likely that a driver just
needs to be teaked for this combination, or will a new driver need
interrupt acknowledge?
and the sound is crap, very static.
Anyone got any ideas?
Alex
On Thu, Oct 17, 2002 at 01:25:03PM +1300, Alex King wrote:
> I am having fun getting the onboard sound on my recent Gigabyte GA-7VKML
> mobo working.
>
> The mobo has a VIA VT8233A southbridge, and a Re
I've followed the instructions to use TiMidity as the ALSA sequencer client.
I've installed TiMidity (2.11.3) with the following configuration:
./configure --enable-audio=alsa --enable-alsaseq --enable-gtk
--enable-spectrogram
I then installed ALSA (0.9.0) . When I try to execute 'timidity' (e.
>
> Did you launch the ./snddevices script when installing alsa-driver ?
>
Thanks for the reply. Yes I tried this, with the same result.
I noticed that in my TiMidity++ (2.11.3) distribution there is a file
"alsa_a.c", which contains a reference to "/dev/snd/pcm00". Yet, after I
installed ALS
Thanks Bill, worked a treat!
Alex
On Wednesday 08 January 2003 11:06 am, Bill Allen wrote:
> On Wed, 8 Jan 2003, Alex Anderson wrote:
> > > Did you launch the ./snddevices script when installing alsa-driver ?
> >
> > Thanks for the reply. Yes I tried this, with the same r
with alsa support!
Can anybody fix this problems?
Regards,
Alex Pita
---
This SF.NET email is sponsored by: Thawte.com
Understand how to protect your customers personal information by implementing
SSL on your Apache Web Server. Click here to ge
midi-oss #/dev/midi
According to ALSA-HOWTO this feature is missing...and this problem
require for some applications to be recompilled with alsa support!
Can anybody tell me how to fix this problems?
Regards,
Alex Pita
---
This SF.NET email
G'day mate,
I installed latest ALSA-drivers, but headphone doesn't produce any sound
nor the hadphone switch mutes my speaker. Speakers have sound all the
time. Just nothing happens when I plug in my headphone. (BTW: headphone
switch works under windows).
Unfortunately, I already logged a b
Hi,
After a long time I finally got my soundcard working with sound through
headphones. How do I now disable the speakers on my laptop when I plug in
my headphone? (BTW: headphone switch works under windows)
My System:
- Laptop computer (Racoon Z75 from littlebit.ch)
- ALC 880 (from Realtek)
I want
to try this way to.
TIA alex
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sou
stanza
in my .asoundrc and make it the default device so that applications
that outputs to the defualt alsa device uses it automatically.
oivvio
alex
-
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - th
can see recent entries in changelog indicating
that this driver has been worked on.
If Revolution 5.1 still has problems, is Revolution 7.1 a
better supported device?
I would greatly appreciate any advice.
Thanks,
Alex
--
Alexander Roitman http://gramps-project.org
signature.asc
Description
Hal,
I am thinking of getting myself a Revo, either 5.1 or 7.1.
Apart from your mic issues, are there any other problems?
In particular, I saw older postings saying that the
headphone output was not working. Does it work for you?
Thanks,
Alex
On Sun, 2007-09-09 at 16:31 -0700, Hal V. Engel
I just subscribed so I apologize for not threading the email properly.
Michael, this is how I set up my .asoundrc. Note that I also fiddled
around with the /etc/modprobe.d/blacklist file to get it to show up as
default / card 0. It produces the 5.1 sound properly using a 6
channel test wave file
period_time 0
period_size 1024
buffer_size 32768
}
}
ctl.dmixer {
type hw
card 0
device 1
}
to make use of my digital connection, but when i do this, I can't multi
use the sound card.
so
user video starts aoss squeezeslave, then us
river
(I tried 0.9.8 and 1.0.0pre1), I get this "'PDE' previously defined"
error, which I think is because the kernel already has alsa-driver
support (or so I read)
I'm a kind of newbie here so I don't know where to start.
Can anyo
there _is_ some way (througn .asoundrc, maybe?)...
Thanks,
Alex
---
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills. Sign up for IBM's
Free Linux Tutorials. Learn everything
I have a M-Audio Revolution 7.1 card and would like to output sound through
the S/PDIF Coaxial output. I am a ALSA newbie and have no idea where to
start. I know this topic has been addressed before but I could not find any
documetation on the subject, neither alsa-project.org or the mailing lis
Endian') output but
without sound, and after 5-10 seconds I get the error:
aplay:pcm_write:1083: write error: Input/output error
I added various output below, but if you need any other file output,
just ask, and I'll gladly add them to the list.
Thank you for reading this m
p.
version: alsa 1.0.0rc2
Distro: Mandrake 9.2
kernel: 2.4.22-10mdk
gcc:3.3.1 (same as used for kernel I think)
sound card: Guillemot Fortissimo
Thanks in advance,
Alex Haan
the Netherlands
---
This SF.net email is sponsored by: IBM Linux Tu
I have been trying to install this version of alsa from source. After I make
and make install the driver, lib, utilities I cannot use the alsamixer of
other utilities. It looks like that the /dev/snd/* is missing.
I read the INSTALL instruction from the source, it said I need to run the
snddevi
Hi, this seems to be the same error I get.
see '[Alsa-user] "modprobe snd-ymfpci" results in "init_module: No such device"' just
a few messages before yours.
At least I'm not alone on this.
I didn't change the /etc/modules.conf file yet, since the walk tr
Florian Schmidt wrote:
On Wed, 07 Jan 2004 10:49:21 +0100
Alex Haan <[EMAIL PROTECTED]> wrote:
Hi, this seems to be the same error I get.
see '[Alsa-user] "modprobe snd-ymfpci" results in "init_module: No
such device"' just a few messages before yours. At l
801DB AC'97 Audio
Controller.
I wonder if my card is supported.
Any help ?
Thanks a lot.
Alex
---
This SF.net email is sponsored by: Perforce Software.
Perforce is the Fast Software Configuration Management System offering
advanced bran
rther information, but I would be really
thankful if anyone could have a peek at the problem described below:
Thank you very much,
Alex Marandon
-Message d'origine-
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] la part de Alex
Marandon
Envoye : dimanche 4 janvier 2004 20:21
A : [EMAIL
a-project.org. Alsa drivers are not enabled in my kernel, while
sound(core) is.
Nothing that relies on ALSA native seems to work, however OSS emulation
works.
heres what happens when I try to run alsamixer:
alex:/home/alex/download# alsamixer
alsamixer: function snd_mixer_load failed: Inval
at relies on ALSA native seems to work, however OSS emulation
works.
heres what happens when I try to run alsamixer (as root):
alex:/home/alex/download# alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
alex:/home/alex/download#
and with a "strance -eopen alsami
know is important on a computer.
If you need more info head here.
http://www.linuxquestions.org/questions/showthread.php?s=&threadid=158513&highlight=infamous
Hopefully somebody can help me, or point me in the
right direction.
Alex
__
Do you Yahoo!?
Yahoo
I've gotten dmix to work (by following the howto) to
have multiple apps (such as xine and xmms) to play
sound simultaneously.. However, my original goal,
which was to be able to play games in snes9x while
playing music in xmms remains unfullfilled..
Running it straight while xmms is running, it wo
--- Lee Revell <[EMAIL PROTECTED]> wrote:
> On Mon, 2006-02-20 at 21:53 -0500, Alex Mason wrote:
> > Running it straight while xmms is running, it
> won't
> > load, since it wants to take over the sound card
> for
> > itself, and won't load until it&#
I find myself switching between mouse-mode-object and mouse-mode-zoom
quite a lot, pressing z and o respectively. I'd like to be able to
just press one key and go to previous mouse mode. Kinda like switching
between windows in kde or buffers in emacs.
How to I accomplish that?
alex
--
On 3/1/06, Lee Revell <[EMAIL PROTECTED]> wrote:
>
> What the hell app are you talking about?
Oops sorry! Autocompletion in the address field gave me alsa-users
instead of ardour-users.
--
Alex Polite
http://flosspick.org - finding the right
ulseAudio
it doesn't work at all.
What can I do?
Best regards.
--
Alex ARNAUD
--
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_
t disables HDMI but it no longer possible to change the volume both
through PulseAudio or alsamixer.
Do you know how to disable HDMI audio output ? (I'm not an expert in
sound configuration)
Thanks in advance.
Best regards,
Alex.
___
Al
Hi all.
I'm using ALSA to configure a dmic. My dmic only support format S32_LE
but I also need support format S16_LE.
arecord -D hw:0,4 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:0,4":
ACCESS: RW_INTERLEAVED
FORMAT: S
e, fails with the U8 format.
El jue., 7 nov. 2019 a las 2:20, chris hermansen
() escribió:
>
> Alex and list;
>
> On Wed, Nov 6, 2019 at 1:26 PM Alex Vazquez wrote:
>>
>> Hi all.
>> I'm using ALSA to configure a dmic. My dmic only support format S32_LE
>&g
7; ' device 4 subdevice 0
El jue., 7 nov. 2019 a las 8:04, Clemens Ladisch via Alsa-user
() escribió:
>
> Alex Vazquez wrote:
> > pcm.!default {
> > ...
> >
> > arecord -r 16000 -f S16_LE -c 1 -d 3 rec.wav
> > Recording WAVE 'rec.wav' : S
Hello
I would like to know if i can install ALSA without having modules
implemented in kernel.And if yes how ...
Thank you .
___
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lis
Hi Christian,
Could you be more specific about what isn't working for you? I myself have
substituted the dsnoop/dmix stuff I told you about for a simple route plugin
(due to some GStreamer weirdness going on with those plugins), but the asoundrc
I sent you allowed me to break my Delta 1010 into
tial files).
This is the basic pipeline (I left out queue's you'd need for
multithreading etc.), but it should be a pretty decent way of doing
what you're asking.
Alex.
On Thu, 2 May, 2013 at 6:52 PM, Bill Unruh wrote:
On Thu, 2 May 2013, Vincent Gulinao wrote:
Hi everyo
When you say "all settings are maxed", does that include the settings
in alsamixer?
Alex.
On Thu, 16 May, 2013 at 11:53 AM, Shlomi Fish
wrote:
Hi all,
does anyone have any idea about my issue?
Insights would be appreciated.
Regards,
Shlomi Fish
On Mon, 13 May 201
ase tell me, is there any way of getting this to work??
King regards,
Alex MDC
---
This SF.net email is sponsored by: SlickEdit Inc. Develop an edge.
The most comprehensive and flexible code editor you can use.
Code faster. C/C++, C#, Java, HTML,
62 matches
Mail list logo
