Hi!
The trouble is the following: I cannot record anything from microphone
using Crystal 4281 card (driver snd-card-cs4281) and 4620
(snd-card-cs41xx) and Alsa 0.5.12a drivers. Playback is Ok at both
cards. Mixer is Ok too, I hear the signal from the microphone in the
speakers. I tried to swit
On 14 Nov 2002 18:47:57 -0600
Lonnie Borntreger <[EMAIL PROTECTED]> wrote:
> On Thu, 2002-11-14 at 14:07, Lonnie Borntreger wrote:
> > This MB has a "C-Media PCI CMI8738-MC6 (model 55) at 0xc800, irq 10"
> > built in. I have yet to get it working fully. Like I don't have Mic in
> > or an OSS mix
Hi Richard, hi Benny(perhaps you have some idea what's going on ;-))
Richard Stevens wrote:
> [...]
>
> The problem is massively distorted sound. I get the driver loaded and
there is
> some sound coming out of the card. But it's distorted. If I set very low
> levels for Master, PCM and DAC in als
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> same problem for me and my DMX XFire 1024 :-(.
> I think the distortion sounds like a DC offset introduced by the PCM
> channel. Do you also get popping noise when changing the PCM volume?
yes, I also have that. There is something else I found
On Thu, Oct 31, 2002 at 10:08:01PM +0300, Maartin wrote:
>
> OK, went through everything again, ooo yes I did miss the module.conf bit
>but added now. Redid the whole damn process (with having to specify the kernel source
>path with every ./configure).
>
> And
> Double crap st
On 14 Nov 2002 14:43:13 -0500
"Larry Smith Jr." <[EMAIL PROTECTED]> wrote:
> Can anyone help me get the Alsa drivers installed on an RH 8 system
> using a CMI8738 sound card?
http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=ASOUND&card=ASONIC-8738&chip=CMI8738&module=cmipci
HTH
On Fri, 2002-11-15 at 08:07, Yury Aliaev wrote:
> Hi!
>
> The trouble is the following: I cannot record anything from microphone
> using Crystal 4281 card (driver snd-card-cs4281) and 4620
> (snd-card-cs41xx) and Alsa 0.5.12a drivers. Playback is Ok at both
> cards. Mixer is Ok too, I hear the
Hello all,
We have a problem having alsa-driver to work since rc3.
The driver compiles fine, but when when we try to register the modules, we got
unresolved symbols, no matter what sound card is used.
Here's my personal output:
depmod: *** Unresolved symbols in
/lib/modules/2.4.19/kernel/soun
Hi,
I attached the outputs of
'cat /proc/asound/card0/*' and
'cat /proc/asound/card0/dsp/*'
before and after reloading the snd-cs46xx module. After reloading the
distortion and popping noises are gone. Does this help finding an error?
Richard Stevens wrote:
When they get loaded the second time
Hi All,
I'm using alsa driver for my via82xx sound card on my RedHat 7.3 linux OS.
But I got problems when I setting the volumes.
I have two machines, which have the same configuration, and then I adjust
all volume to max using alsamixer. On one machine, the sound file play fine,
but on the ot
Hi to all,
I have an iBook I want to install ALSA on. I already had a running
version (the one with the internal speaker bug - no sound) which worked
fine with my USB Quattro.In order to fix this bug I tried to install the
latest CVS-version which causes trouble. It installed everything fine
witho
On Fri, 2002-11-15 at 03:21, Frans Ketelaars wrote:
>
>http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=ASOUND&card=ASONIC-8738&chip=CMI8738&module=cmipci
> at the end there is:
>
> Lukasz Weber [EMAIL PROTECTED]
> Sunday, 03 November 2002
Yeah. I saw that.
> To enable t
Benny, thanks a lot for your new DSP code. Hardware mixing works great!
I didn't test variable period sizes up to now because I'm using Mandrake
RPMs at the moment. So, patching isn't possible right now, but I'll
change back to tarballs or cvs soon :-). Btw, do you have any idea how
to get 4 indep
same problem for me and my DMX XFire 1024 :-(.
I think the distortion sounds like a DC offset introduced by the PCM
channel. Do you also get popping noise when changing the PCM volume? It
just sounds like changing the supply voltage of a running amplifier for
me. Perhaps I can measure the DC level
Hi folks, strange behaviour here.
Here is a Geode based embedded board, using the 5530 south-bridge with an
ad1881 AC97 codec. (ICP Wafer 5825 V1.1).
Since there is no Geode support in alsa yet, I am using the built in
sb16 emulation.
This only works however if the IDE dma is turned OFF. With
Hi!
Benny Sjostrand wrote:
same problem for me and my DMX XFire 1024 :-(.
I think the distortion sounds like a DC offset introduced by the PCM
channel. Do you also get popping noise when changing the PCM volume? It
just sounds like changing the supply voltage of a running amplifier for
me. Perha
I've some troble with my sound card.
I've compiled the kernel with alsa and the driver as modules and
installed alsa using 0.9.0rc5 in kernel 2.5.46
cat /proc/asound/cards:
0 [card0 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xeb001000, irq 9
cat /proc/asound
I recently bought a M-Audio Delta 1010LT (Envy24 chip), and connected
analog output 1 and 2 to my stereo. Everything seems to work ok (drivers
are loaded, no program complains), but there is no sound. I have even
meassured the outputs with a multimeter!
In the envy24controll program, all 'H/W O
I've been fighting with RedHat 8.0 for a couple of weeks
now. I still can't have sound.
1-Linux detects a CS-4610 which cannot play any sound
2- I compiled from source and failed with the "lib" Alsa-
0.9.0rc5
3- I tried the rpm and received "cs-4236+ doesn't exist or
is busy" in 'dmesg' in response
Hi,
I'm using alsa-0.9.0rc5 with SBLive 5.1 digital.
I get an enormous range of ncurses columns in alsamixer ( full list
below).
At present I am transfering cassettes to CD and so recording them as .wav
files.
To do this and listen to the .wav files with either arecord/aplay or snd
and also to
Have you tried to hear an audio CD (with analog output) ?
Laurent
le Sat, 16 Nov 2002 01:56:07 +0100
Johannes Sandvall <[EMAIL PROTECTED]> a écrit :
> I've some troble with my sound card.
>
> I've compiled the kernel with alsa and the driver as modules and
> installed alsa using 0.9.0rc5 in ker
21 matches
Mail list logo
