-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
|
| Hm thanks for the tip. I also have quite some distortions and
| metalic sounds with Mandrake 9.2 and Hercules Game Thater XP
| (cs46xx). It looks like some Mandrake patch is causing this then.
not likely. The cs46xx driver doesn't seem to like
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Friday 22 August 2003 23:04, Bob Lockie wrote:
> This must be in a FAQ somewhere but I can't find it.
> I can't change the volume (with xmms and presumably everything else).
I think xmms needs an oss mixer device. Did you load snd-pcm-oss?
If you
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Uhm,
this will also be an obvious one but one that is often forgotten.
> But no sound comes out. I've checked all my cabling, yadda yadda yadda...
> the speakers check out on another PC... everything loads fine, hardware's
> all good, but I get no so
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> It sounds well with ALSA-driver rc2 but distortedly with driver >= rc3
Try restarting the driver after it gets first loaded. Appearantly some XFire
1024 Boards don't get initialized properly the first time. This subject comes
up here on regular ba
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> > > > My modules.conf file is
> > > >
> > > > alias sound-slot-0 i810_audio
> > > > alias sound-slot-1 snd-usb-audio
> > > > ...
> > > > alias snd-card-0 i810_audio
> > > > alias snd-card-1 snd-usb-audio
> > > > alias sound-slot-0 snd-card-0
> > > >
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> I changed the line with the free oss-portion to
>
> alias sound-slot-0 snd-card-0 (first it was snd-cs46xx)
>
> I thought now with startting to hear this little plop usually a sign
> that the card get intialised.
> Again nothing is used when looking
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I can't see your problem from the data you provided but I have the same card
and it works great with alsa.
The difference to my config that I can see is that you are missing the snd
module. Here is my modules.conf:
# ALSA portion
alias char-ma
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
we are getting there :-)
> ok here is my modules.conf now
>
> >.
(...)
> alias sound-slot-0 i810_audio
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>
> >/dev/null 2>&1 || :
>
> pre-remove sound-slot-0 /bin/
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> I am using an MAudio usb Quattro. One thing I didn`t understand about
> editing the modules.conf was whether I was to replace some values or
> merely augment the files by placing the new data as copied/pasted from the
> site onto the end of the file.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> crw---1 todd root 14, 3 Mar 1 20:31 /dev/dsp0
> crw---1 todd root 14, 19 Mar 1 20:31 /dev/dsp1
> crw---1 todd root 14, 35 Mar 1 20:31 /dev/dsp2
> crw---1 todd root 14, 51 Mar
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> alias sound-slot-0 i810_audio
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
you don't seem to be using alsa at all. This looks like the oss or kernel
module. The appropriate alsa module should be called snd-intel8x0. Or yo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi again,
On Monday 03 March 2003 02:44, tod wrote:
> Ok here is what I got from those commands:
>
> ps ax, then 'grep devfsd' sets the computer looking but it never gets
> anything & I have to close the shell.
uhm, CTRL + C should have done the tric
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Monday 03 March 2003 01:06, tod wrote:
> I'm running redhat 7.3, will that matter?
I don't think RedHat 7.3 was already based on devfs. So this wouldn't apply to
you. But you can easily find out. First of all, you'd have that devfsd.conf
fil
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> i do this every time i load the modules (i do this by hand because of
> the quirkiness of mandrake! although im sure i could write it into my
> startup script with no problems)... one note if you're running mandrake
> is that ./snddevices isnt t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Just an additional note,
make sure you use alsamixer for that. I had a similar problem with my card and
I really unmuted all channels with kmix. The problem was, kmix didn't display
the DAC and ADC sliders and my DAC was set to minimum, too.
On Fr
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> hmm, please show which cards and drivers are you using?
> it might be not due to the usb but to other stuffs.
I have:
Terratec X-Fire 1024 with cs46xx
Onboard sound on my Asus A7M266-D with cmipci
Edirol UM-2 USB Midi with usb-audio
The relev
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
An addition:
I tried only loading the driver for my midi interface and that works without a
problem. When I load the midi interface as my first card and the other two
next, it works, too. Midi interface driver as second card and only two cards
work
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I'm trying to get my Edirol UM-2 USB Midi adapter to work but I'm only partly
successful. I'm running RC7 on a 2.4.20 SMP kernel (SMP-System). The adapter
is loaded as 3rd soundcard via snd-usb-audio. It seems to get loaded
correctly since I ca
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
it seems you run the alias command within a shell. There is an alias command
in bash but that's something else. The alias lines you need are not shell
commands but configuration lines in your /etc/modules.conf. If you already
have sound, everyt
ld like to have this done automatically
> by some change in an init script or my modules.conf but don't know how
> to do this best. At the moment the soundcard section of my modules.conf
> consists of only one line which loads alsa+oss modules:
> above snd-cs46xx snd-pcm-oss
>
>
fter the reload.
It could be worse ;)
CU and thanks again,
Richard
On Friday 03 January 2003 14:07, Georgi Georgiev wrote:
> On Fri, Jan 03, 2003 at 01:24:08PM +0100, Richard Stevens wrote:
> > and put them in my rc.local script. That does the job as a workaround.
> > I'll also
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
thanks for your replies. I have my modules.conf already configured similar to
Miguel's description. Sorry for not including it right away. From Georgi's
very complete system information I found out some new spots in proc to look
for things and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have two soundcards in my PC. One is a Terratec DMX Xfire using cs46xx and
the other is an onboard cmipci thing. I conifgured alsa to get the cmipci as
card 0 and the cs46xx thing as card1. There are a couple of things I'd like
to have but th
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> when i tune each channel (spaker, pcm, etc ) with Kmix and stop and
> restart kde, I can't restore the lasts levels and i am oblige to adjust
> again
KDE usually restores the values you saved in kmix or some default. Check in
Controlcenter if
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Nov 24 22:13:13 bl modprobe: modprobe: Can't locate module
> sound-service-2-3 Nov 24 22:13:13 bl modprobe: modprobe: Can't locate
> module sound-slot-3 Nov 24 22:13:13 bl modprobe: modprobe: Can't locate
> module sound-service-3-0 Nov 24 22:13:13 bl
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have a slight problem getting oss emulation to work on gentoo linux with two
soundcards. This is what I have in my modules.conf:
# ALSA portion
alias char-major-116 snd
options snd snd_major=116 snd_cards_limit=2
# OSS/Free portion
alias char-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 20 November 2002 19:29, Mark Swanson wrote:
> I'm trying to play sounds/midi from Java. This works find if I kill arts.
> If I enable arts Java just hangs trying to open the audio device.
>
> I did get this working once where java was play
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 20 November 2002 20:21, you wrote:
> So my alsa-newb question is: does ALSA allow more than one program to open
> and write to sound devices? I assume ALSA would transparently
> software/hardware mix the sound? If yes, (I sure hope the an
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Is the sound from that comes from the SPDIF interface OK ?
> Just would try to understand if the problem is digital, DSP related issue,
> or something analog, CODEC related ...
I just checked that. Digital out is fine when analog out is distorted. T
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
> same problem for me and my DMX XFire 1024 :-(.
> I think the distortion sounds like a DC offset introduced by the PCM
> channel. Do you also get popping noise when changing the PCM volume?
yes, I also have that. There is something else I found
once more, maybe I'll find a recommendation that I can
actually get my hands on.
Thanks,
Richard
On Friday 15 November 2002 00:35, M. Ritscher wrote:
> Hi Richard,
>
> On Friday 15 November 2002 00:06, Richard Stevens wrote:
> > Which cards are recommended? The Alsa Proj
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
one last mail for now...
In case my problem with the Terratec DMX XFire 1024 can't be solved I'll
probably have to replace it with something better supported.
Which cards are recommended? The Alsa Project driver matrix doesn't help much
here
ation?
Thanks,
Richard
On Thursday 14 November 2002 22:15, Richard Stevens wrote:
> Hi,
>
> I have some problems with the card mentioned in the subject. I searched the
> documentation and older mailinglist articles but didn't find any
> information regarding my problem.
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
I have some problems with the card mentioned in the subject. I searched the
documentation and older mailinglist articles but didn't find any information
regarding my problem.
The problem is massively distorted sound. I get the driver loaded and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 27 September 2001 11:42, Jaroslav Kysela wrote:
> On Wed, 26 Sep 2001, Richard Stevens wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On Thursday 27 September 2001 05:15, Christ
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 27 September 2001 05:15, Christian Gerlach wrote:
> Hi,
>
> I have a Terratec DMX and it only seems to be partly supported by the alsa
> driver. Are there any ambitions or work in progress to especially support
> the integrated SPDIF I/O?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Sunday 23 September 2001 12:47, Erik Mouw wrote:
> On Fri, Sep 21, 2001 at 08:39:37AM -0700, Boris Bronshteyn wrote:
> > I own Dell's Inspiron 8100 with Maestro 3 in it. I have installed ALSA
> > drivers and they work -> all sounds are enabled. The
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 19 September 2001 16:12, [EMAIL PROTECTED] wrote:
> Hello sir,
> how are you , i am again in problem & making you too in
> problem...
>
> i can easily mount my FAT Partitions But my NTFS Partition can not be
> mount. As y
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Yes of course you can use our Premium Service if you want us to take care
> of everything. That will be $399 per incident. If you want the drivers to
> be emailed to you via our Premium Service then please contact
> [EMAIL PROTECTED]
lol ;)
>
>
>
39 matches
Mail list logo
