[Alsa-user] pcm problem with nforce2

2003-10-14 Thread Grégoire
I've got a problem with the pcm volume. I have an ep-8rda3+ motherboard with nforce2 chipset kernel 2.4.22 debian woody alsa 0.9.7.c (i dl it today then i folllowed the cvs instructions) and i cannot change the volume, i mean it's eiter 0 or 100% with the pcm. alsamixer or aumix don't have any ef

Re: [Alsa-user] M-Audio Quattro USB (again) [aacton@yorku.ca]

2003-10-14 Thread Falko Rütten
Austin <[EMAIL PROTECTED]> schrieb: > Yeah, I have the same error. > Using 'quattro1' or 'quattro2' works, but 'quattro' or 'q4' fails. how about q4b (not plug but route type)? The same? > Jack 0.75, alsa 0.96.0. It used to work, but I can't remember which > kernel change or jack change made it

[Alsa-user] asus a7v8x-x

2003-10-14 Thread Bayram Tamer GUNES
is there anyone who uses asus a7v8x-x mainboard and have the o/b sound card (snd-via82xx) working ? --- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have

Re: [Alsa-user] M-Audio Quattro USB (again) [aacton@yorku.ca]

2003-10-14 Thread Austin
On 10/14/2003 12:33:57 PM, Falko Rütten wrote: I have been experimenting a bit, some things seem to work, e.g. I can use either the left or the right pair of channels.., but -- when I want to start jackd with 4-channel enabled, I get the following errors: ALSA lib pcm_hw.c:494:(snd_pcm_hw_start)

Re: [Alsa-user] Alsa + Realplayer 8.0

2003-10-14 Thread Myk
On Tue, 14 Oct 2003 14:47:00 +0200 Frank Barknecht <[EMAIL PROTECTED]> wrote: > Hallo, > [EMAIL PROTECTED] hat gesagt: // [EMAIL PROTECTED] wrote: > > > Finally, when I use surround51, the rear speakers actually produce > > sound! Can XMMS also use surround51? > > Maybe with the xmms-alsa-plugin

Re: [Alsa-user] M-Audio Quattro USB (again)

2003-10-14 Thread Falko Rütten
Hi, I have been experimenting a bit, some things seem to work, e.g. I can use either the left or the right pair of channels.., but -- when I want to start jackd with 4-channel enabled, I get the following errors: - JACK compiled with POSIX SHM support 7936 waiting for

Re: Re: [Alsa-user] Alsa + Realplayer 8.0

2003-10-14 Thread Stoic
> > van: Frank Barknecht <[EMAIL PROTECTED]> > datum: 2003/10/14 di PM 02:47:00 CEST > aan: [EMAIL PROTECTED] > onderwerp: Re: [Alsa-user] Alsa + Realplayer 8.0 > > alsa-init: 1 soundcard found, using: hw:0,0 >^^ > That's the error: mplayer is one of t

Re: [Alsa-user] Slave PCM not usable

2003-10-14 Thread lb jourdain
I also have these parameters set to "closed": /proc/asound/card0-=>more pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: Intel ICH name: Intel 82801CA-ICH3 subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1

Re: [Alsa-user] Slave PCM not usable

2003-10-14 Thread lb jourdain
Here it is: >cat /proc/asound/card0/ac97#0 0-0/0: Yamaha YMF753 Capabilities : -bass & treble- DAC resolution : 18-bit ADC resolution : 16-bit 3D enhancement : YAMAHA Ymersion Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement :

[Alsa-user] anyone uses 5.1 Sb-Live or Audigy?

2003-10-14 Thread "Artem Chuprina"
Hi, The question is how to set it up to route the signal to the subwoofer? I've got a simple subwoofer, which is connected to its channel only. I can't believe such a thing is not supported by ALSA - works fine with the kernel driver as well as under Windows I've read SB-Live-mixer.txt but c

Re: [Alsa-user] Slave PCM not usable

2003-10-14 Thread Clemens Ladisch
lb jourdain wrote: > > aplay -D hw /usr/share/sounds/gabber/gabber_message_recv.wav > Playing WAVE '/usr/share/sounds/gabber/gabber_message_recv.wav' : > Unsigned 8 bit, Rate 8000 Hz, Mono > aplay: set_params:787: Broken configuration for this PCM: no > configurations available Please post the co

Re: [Alsa-user] Alsa + Realplayer 8.0

2003-10-14 Thread Frank Barknecht
Hallo, [EMAIL PROTECTED] hat gesagt: // [EMAIL PROTECTED] wrote: > Finally, when I use surround51, the rear speakers actually produce sound! Can > XMMS also use surround51? Maybe with the xmms-alsa-plugin? > Also with mplayer when I perform the following: > > $ mplayer -channels 6 -ao alsa9

Re: [Alsa-user] Slave PCM not usable

2003-10-14 Thread Jaroslav Kysela
On Tue, 14 Oct 2003, lb jourdain wrote: > Hi, > > this is what I get: > > aplay -D hw /usr/share/sounds/gabber/gabber_message_recv.wav > Playing WAVE '/usr/share/sounds/gabber/gabber_message_recv.wav' : > Unsigned 8 bit, Rate 8000 Hz, Mono > aplay: set_params:787: Broken configuration for this PC

Re: [Alsa-user] Slave PCM not usable

2003-10-14 Thread lb jourdain
Hi, this is what I get: > aplay -D hw /usr/share/sounds/gabber/gabber_message_recv.wav Playing WAVE '/usr/share/sounds/gabber/gabber_message_recv.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:787: Broken configuration for this PCM: no configurations available >aplay -D plughw /us

[Alsa-user] nforce2/snd-intel8x0 background noise? arg!

2003-10-14 Thread Ryan Verner
Hiya, I've got a relatively newish machine, with an ASUS nforce2-based motherboard; been running various flavours of 2.5.xx and 2.6.0-testx with various successes. On loading the snd-intel8x0 module, I get a horrible amount of background noise; at first, I thought by muting everything it would go