Re: [Alsa-user] Slave PCM not usable

[lb jourdain]

Hi,

this is what I get:
> aplay -D hw /usr/share/sounds/gabber/gabber_message_recv.wav
Playing WAVE '/usr/share/sounds/gabber/gabber_message_recv.wav' : 
Unsigned 8 bit, Rate 8000 Hz, Mono
aplay: set_params:787: Broken configuration for this PCM: no 
configurations available

>aplay -D plughw  /usr/share/sounds/gabber/gabber_message_recv.wav
Playing WAVE '/usr/share/sounds/gabber/gabber_message_recv.wav' : 
Unsigned 8 bit, Rate 8000 Hz, Mono
ALSA lib pcm_params.c:2096:(snd_pcm_hw_refine_slave) Slave PCM not usable
aplay: set_params:787: Broken configuration for this PCM: no 
configurations available

Thanks,

LB

Clemens Ladisch wrote, On 10/10/2003 07:02 PM:

lb jourdain wrote:

 

Clemens Ladisch wrote, On 10/09/2003 12:15 PM:

   

LB wrote:

     

ALSA lib pcm_params.c:2096:(snd_pcm_hw_refine_slave) Slave PCM not usable
       

Is there anything in /etc/asound.conf or in ~/.asoundrc?
     

I don't have any of those files.
   

I thought one of these files would contain an incorrect pcm
definition, but this is not the case. Not having these files is just
fine.
What happens when you run "aplay -D hw something.wav", or
"aplay -D plughw something.wav"?
Regards,
Clemens
 



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the people who have HELPED US provide better services:
Click here: http://sourceforge.net/supporters.php
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user