Hi,
I've just bought a new soundcard. It's the Soundblaster Audigy 2 Platinum
eX,
and I wonder if there is any driver development going on for it. If not what
should
I do to make someone do it ^_^?
Thanks in advance
/Kristian
---
This SF.net
Hi,
Thanks for the suggestions. I chose to fall back to version rc6 (lib,
utils, and driver).
I'm closer to getting things going - but not quite there.
If I use the alsa-driver-*/utils/insert script I can get sound.
However, if I add the entries in the /etc/modules.conf I get the dreaded
pcm
can anyone who has ever used the rme hammerfall (9652) or hammerfall
lite (9636) successfully with the adat to rca spdif connector (the
dongle-ish thing that comes with the card) send me a copy of his/her
asound.state file?
i have had this card for some time but have never gotten the input that
Hallo,
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> Frank Barknecht wrote:
> > Now I found this in usbquirks.h:
> > USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
> > .driver_info = (unsigned long) & (const snd_usb_audio_quirk_t) {
> > .vendor_name = "EDIROL",
> >
On Mon, Feb 17, 2003 at 04:09:37PM -0500, John Bleichert wrote:
> On Mon, 17 Feb 2003, tod wrote:
> > Subject: [Alsa-user] NEWBIE- help installing Quattro
> >
> > Hi, I have been using linux for a little while (1/2 yr) & am ok @ it. I
> > am a bit overwhelmed by the detailed and seemingly lengthy
> > > please check /proc/asound/card0/ac97#0regs whether the value of
> > > register 0x18 varies. if it doesn't change, then something wrong.
> > > if it changes, then the hardware likely doesn't support this PCM
> > > channel.
> >
> > When I mute the channel (which works), that register gets ORe
On Thursday 20 Feb 2003 10:11 am, Takashi Iwai wrote:
> At Wed, 19 Feb 2003 19:34:59 +,
>
> Stuart Gardner wrote:
> > I am still trying to get my nForce sound working via ALSA.
> > Since I last said anything here, I have attempted to use the
> > 2.4.21-pre2-jp15 kernel which has ALSA built in [
At Thu, 20 Feb 2003 12:05:32 -0500,
Francois Ouellet wrote:
>
> > > > hmm, strange, i don't found any description about this behavior in the
> > > > datasheet...
> > >
> > > Is there anything I can do to (help) find out what's wrong?
> >
> > please check /proc/asound/card0/ac97#0regs whether the
Hallo,
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> However, the USB interface for the MIDI ports should be number 3 (0-2 are
> for the PCM audio part), but your device doesn't have interface #3:
>
> > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0582 Prod
Hi,
when i play sound in rear speakers,neither the PCM Volume nor
the Master volume has any affect on it eg, i could turn
PCM and Master to minimum and sound would still come out the
rear speakers ... only the 'wave surround' mixer control
has an affect ..is this the way it is? or am i doing
s
> > > hmm, strange, i don't found any description about this behavior in the
> > > datasheet...
> >
> > Is there anything I can do to (help) find out what's wrong?
>
> please check /proc/asound/card0/ac97#0regs whether the value of
> register 0x18 varies. if it doesn't change, then something wro
Frank Barknecht wrote:
> Frank Barknecht wrote:
> > /proc/bus/usb/devices:
> > P: Vendor=0582 ProdID=0026 Rev= 1.01
> > S: Manufacturer=Roland
> > S: Product=EDIROL UA-20
>
> Now I found this in usbquirks.h:
> USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
> .driver_info = (unsigned long) &
At Thu, 20 Feb 2003 11:22:02 -0500,
Francois Ouellet wrote:
>
> > > and this for the SI7018
> > >
> > > Card default 'SI7018'/'SiS SI7018 PCI Audio at 0xc400, irq 11'
> > > Mixer name: 'C-Media Electronics CMI9738'
> > > Components: 'AC97a'
> > > Controls : 161
> > >
Takashi Iwai wrote:
> Francois Ouellet wrote:
>
> > Hi
> >
> > When I try to change the PCM volume using alsamixer, nothing happens. It
> > just plays at the same volume. Mute does work though. The Master volume
> > also does work as expected. Is this a limitation of some cheap on-board
> > c
Hallo Clemens,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
> /proc/bus/usb/devices:
> P: Vendor=0582 ProdID=0026 Rev= 1.01
> S: Manufacturer=Roland
> S: Product=EDIROL UA-20
Now I found this in usbquirks.h:
USB_DEVICE_VENDOR_SPEC(0x0582, 0x0025),
.driver_info = (unsig
Hallo Clemens,
now here's some more data from home.
Clemens Ladisch hat gesagt: // Clemens Ladisch wrote:
> Does it show up in /proc/asound/cards?
Yes, as:
0 [Edirol ]: USB-Audio - EDIROL UA-20
Roland EDIROL UA-20
(I gave it the id "Edirol" in modules.conf, see below)
> Is sn
Frank Barknecht wrote:
> Clemens Ladisch schrieb:
> > Is usb-midi _not_ loaded?
> This is the kernel-OSS-midi driver, yes?
Yes. To disable that one, add it to /etc/hotplug/blacklist, or recompile
the kernel without usb-midi.
> I'm still runing 0.9rc6 on this laptop. I read in the
> alsa-devel-arc
At Wed, 19 Feb 2003 14:23:40 +,
Dessimat0r wrote:
>
> Hi, using 'cvscompile', I am seemingly unable to install alsa-libs on Gentoo
> Linux. Here is the output from the cvscompile script, when ran in the
> alsa-lib directory:
i guess you're using the old libtool.
please try either to update
At Wed, 19 Feb 2003 19:34:59 +,
Stuart Gardner wrote:
>
> I am still trying to get my nForce sound working via ALSA.
> Since I last said anything here, I have attempted to use the 2.4.21-pre2-jp15
> kernel which has ALSA built in [1]
>
> There is almost no change, except I get more informati
At Wed, 19 Feb 2003 16:59:07 -0500,
Francois Ouellet wrote:
>
> Hi
>
> When I try to change the PCM volume using alsamixer, nothing happens. It
> just plays at the same volume. Mute does work though. The Master volume
> also does work as expected. Is this a limitation of some cheap on-board
>
At Thu, 20 Feb 2003 09:17:01 +1000,
Mitchell wrote:
>
> Hi list,
>
> I am having problems recording with a VIA82XX sound card using ALSA 0.9 RC7.
>
> I can play back mp3, ogg and wav files ok using mpg321, ogg123 and aplay.
>
> I have connected the output from a minidisc player to the line in o
Hi Clemens,
Clemens Ladisch schrieb:
> Frank Barknecht wrote:
> > somehow I seem not to be able to get Midi working on my Edirol UA-20
> > USB interface. I configured it according to the instructions on
> > www.alsa-project.org/alsa-doc but I can't see or use the midi ports,
> > neither in /proc/as
22 matches
Mail list logo
