Aaron Mehl wrote:
> Ok I have Mandrake 9.0 which has ALSA drivers installed by default.
Then the device files should have been created by the Mandrake
installation.
> I downloaded the alsa driver and ran the snddevices script
> there are errors what should I do??
>
> mv: cannot move `/dev/sndstat
Oh no,
truthfully it isn't the only problem I am having with hardware. But I am
not so sure I will dump my distro do quick.
I got my internet connection down pat and now I have no interest in
starting from scratch.
I have tried Suse in the past but I just didn't like it.
I will try a little more ti
Once you have that file don't forget to run any of the "make *config"
commands and save the changes in the end.
Ah, yes. Make sure you don't change anything in the configuration.
--
/^^^\/\
/ Georgi Georgiev(-< / Bilbo's First Law:
Don Raikes wrote:
I decided to go back and ensure that my kernel source was fully
configured. I ran linux-2.4/kernel-2.4.9/linux/make mrproper
which is what the README file says to do.
Next I re-extracted the alsa-driver-0.9.0rc6 tarball and ran the
configure script as follows:
./configure --wi
> Don Raikes wrote:
> > Hello:
> >
> > I am a linux / alsa / c programming newbie.
> >
> > I just got Redhat Advanced Server installed on a compaq deskpro/en pc. I
> > now need to enable sound for the system.
> >
> > I extracted the full source for the Redhat installation, and for the
alsa
> > driv
[EMAIL PROTECTED] wrote:
Hi everybody,
I have compiled and installed alsa-driver, alsa-lib, alsa-utils for
my Terratec EWX24/96 souncard.
The ice-1712 and oss modules are loaded by modules.conf but when I
try to play a sound file I get no sound from the analog output.
Alsamixer works but I cannot
On 14-Jan-03, Thong Nguyen wrote:
> I installed alsa-drivers-0.9.0rc6 and I think it installed correctly.
> I also installed the utility and library package as well. My problem
> is that I get a segmentation fault when I try to list /proc/asound.
Is there an Oops message in the console output?
A quick correction...
Of course, I meant "cat /proc/version" to find out the compiler used for
your current kernel. Whoops. :)
--
Adam Jones ([EMAIL PROTECTED])(http://www.yggdrasl.demon.co.uk/)
.oO("Pandemonium!" )
PGP public key: http://www.y
On 15-Jan-03, Rajesh The Great wrote:
> I use RedHat 7.2. I have Creative Sound Blaster128 (es1371) sound
> card built into my mother board.Line In and Line Out are
> multiplexed in the mother board. I mean to say the "rear out" jack
> and "line in" are the same in my motherboard . The card is
kitestramuort wrote:
Hallo everybody.
I was wondering if it's possible to get 6 channel output from this card+codec
on-board on the Gigabyte GA-7VAXP.
I tried rc4 but I get only the two front speakers working.
Check the archives - the last few messages before yours. If they have
nothing to do
В сообщении от 15 Январь 2003 19:37 [EMAIL PROTECTED]
написал:
> Alsa driver (rc6) loads without any problem. But I get no sound. Yes. I
> have run alsamixer. I use aplay to play WAV file and get nothing. No
> errors, no warnings and no sound. I have .asoundrc.
Try to unmute headphone channel wit
Hi!
I have vt8233 audio controller. lspci -v reports it as following
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio
Controller (rev 10)
Subsystem: Micro-star International Co Ltd: Unknown device 5360
Flags: medium devsel, IRQ 11
I/O ports at
kitestramuort wrote:
don't forget to raise "Surround", "Center", and "LFE" playback
volumes.
you might need to turn "Mic As Center/LFE" or "Line-In As Surround"
switches on. they toggle the shared jacks for playback or capture
direction.
how?
I'm nearly done. Patched, compiled, installed.
The
Hi everybody,
I have compiled and installed alsa-driver, alsa-lib, alsa-utils for
my Terratec EWX24/96 souncard.
The ice-1712 and oss modules are loaded by modules.conf but when I
try to play a sound file I get no sound from the analog output.
Alsamixer works but I cannot open any other mixer devic
Aaron Mehl wrote:
> On Wed, 2003-01-15 at 10:01, Clemens Ladisch wrote:
> > Aaron Mehl wrote:
> > > I tried loading soundfonts and got the following.
> > > maybe this is the reason I can't hear midi files
> > > I ran sfxload and...
> > >
> > > [root@aamehl aaron]# sfxload /mnt/cdrom3/audio/common/s
Hallo everybody.
I was wondering if it's possible to get 6 channel output from this card+codec
on-board on the Gigabyte GA-7VAXP.
I tried rc4 but I get only the two front speakers working.
Thanks a lot
kitestramuort
---
This SF.NET email is s
[ven 25/10/2002, ore 18:10] => Takashi Iwai scriveva:
> At Fri, 25 Oct 2002 17:03:50 +0200,
> kitestramuort wrote:
> >
> > Hallo.
> >
> > I posted a message few days ago about ALC650 5.1 output but I got no
> > answers. I deduce that my onboard audio will never work in 5.1
> > So I resigned my
Hallo.
I posted a message few days ago about ALC650 5.1 output but I got no
answers. I deduce that my onboard audio will never work in 5.1
So I resigned myself to buy a new sound card, but I don't want to miss
this one too.
What cards are supported in 6 channel mode?
I surely know about the C-M
Hi all,
Is there a way to get 6-channel audio from this card+codec?
I'm trying to get my GA-7VAXP on-board audio work.
I tried both alsa rc3 and CVS with vt8233 and vt82xx modules, same result.
Only front speakers work.
Regards
Stefano
---
Th
[sab 26/10/2002, ore 10:24] => Igor Gueths scriveva:
> Hi. Have you tried using amixer? In some cases I have seen some controls
> that can only be found in alsamixer and that are not available in amixer.
> It may apply the other way around. From the looks on the error from
> LIBPCM, your PCM seems
[ven 25/10/2002, ore 23:47] => To alsa-user scriveva:
> [ven 25/10/2002, ore 18:10] => Takashi Iwai scriveva:
>
> > At Fri, 25 Oct 2002 17:03:50 +0200,
> > kitestramuort wrote:
> >
> > could you test the attached patch?
> >
> > don't forget to raise "Surround", "Center", and "LFE" playback
> >
On Wed, 2003-01-15 at 10:01, Clemens Ladisch wrote:
> Aaron Mehl wrote:
> > I tried loading soundfonts and got the following.
> > maybe this is the reason I can't hear midi files
> > I ran sfxload and...
> >
> > [root@aamehl aaron]# sfxload /mnt/cdrom3/audio/common/sfbank/ct4mgm.sf2
> > /dev/sequen
Aaron Mehl wrote:
> I tried loading soundfonts and got the following.
> maybe this is the reason I can't hear midi files
> I ran sfxload and...
>
> [root@aamehl aaron]# sfxload /mnt/cdrom3/audio/common/sfbank/ct4mgm.sf2
> /dev/sequencer: No such file or directory
Did you run the snddevices scripts
23 matches
Mail list logo
