On Thu, 27 Jun 2002 14:42:48 +0200
Frans Ketelaars <[EMAIL PROTECTED]> wrote:
>
> Maybe that cable is missing?
No, that cable is present and well-connected. I was thinking maybe this
has to do with my driver options, which are:
options snd-emu10k1 snd_extin=0x3fcf snd_extout=0x1fcf
These cor
An error while patching:
patching file configure.in
patch unexpectedly ends in middle of line
Hunk #11 succeeded at 788 with fuzz 2.
Mark
---
This sf.net email is sponsored by:ThinkGeek
Bringing you mounds of caffeinated joy.
http://thinkg
root@serena:/opt/alsa# modprobe snd-via8233
/lib/modules/2.4.18/kernel/sound/pci/snd-via8233.o: init_module: No such
device
/lib/modules/2.4.18/kernel/sound/pci/snd-via8233.o: Hint: insmod errors
can be caused by incorrect module parameters, including invalid IO or IRQ
parameters.
You may fi
Hi Honza and Takashi
Now I have downloaded the 5 alsa 0.9 tarballs
unpacked them, got the patch and ran it, then did
./configure --with-cards=via8233 --with-oss=yes
make
make install
for the drivers dir
and for the others did
./configure
make
make install
All went well, no errors
So now you
You replied so quickly, thanks very much.
here is the dmesg.
hub.c: USB new device connect on bus2/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0xa92/0x51) is not claimed by any active
driver
...
...
and I load moudule manualy.
kernel says.
usb.c: registered new driver sn
Hi,
Currently before running a MIDI file I need to load manually the sound bank
into my sound card with sfxload.
Because sfxload requests /dev/sequencer, I load manually snd-seq-oss in order
to create it.
And then I can run:
$ sfxload /usr/share/sounds/sf2/8mbgmsfx.sf2
I just want to loa
At Fri, 28 Jun 2002 00:44:18 +0900 (KST),
Song KiSun wrote:
>
> I alredy compiled and installed lib and utils.
>
> and, I attatched lsusb result.
>
> There is no problem on device. I checked in Windows.
ok, the device can be seen from linux, too.
(but according to the output of lsusb, apparent
I alredy compiled and installed lib and utils.
and, I attatched lsusb result.
There is no problem on device. I checked in Windows.
On Thu, 27 Jun 2002, Takashi Iwai wrote:
> At Fri, 28 Jun 2002 00:25:22 +0900 (KST),
> Song KiSun wrote:
> >
> >
> >
> > Thanks for your e-mail.
> >
> > First,
At Fri, 28 Jun 2002 00:25:22 +0900 (KST),
Song KiSun wrote:
>
>
>
> Thanks for your e-mail.
>
> First, I downloaed alsa 0.5.12 so I couldn't find usb module.
> I downloaded CVS version as you told, and I did compile and install.
then you have to install alsa-lib and alsa-utils together.
> b
Thanks for your e-mail.
First, I downloaed alsa 0.5.12 so I couldn't find usb module.
I downloaded CVS version as you told, and I did compile and install.
but /dev/dsp doesn't atttched.
'lsmod' says snd-usb-audio is unused.
snd-pcm-oss36836 0 (unused)
snd-mixer-oss 8
At Thu, 27 Jun 2002 13:04:06 +0300,
Dr. Dan White <[EMAIL PROTECTED]> wrote:
>
> Frank and Honza et. al.
>
> Thanks for your help, i'm now trying to compile the 0.9.0rc2 ALSA
>
> Honza says he has the same board as me so i'm following his
> instructions, using the configure.dif patch and his in
"Dr. Dan White" wrote:
>
> Frank and Honza et. al.
>
> Thanks for your help, i'm now trying to compile the 0.9.0rc2 ALSA
>
> Honza says he has the same board as me so i'm following his instructions, using the
>configure.dif patch and his instructions to use the via8233 driver not the ALS4000
>
On Wed, 26 Jun 2002 19:12:52 -0700
Jason Van Cleve <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I cannot seem to get CD audio output in the digital out of my SBLive
> Platinum, using ALSA09. MP3s and other audio files play through both
> digital and analogue outputs, but CDs only play through analog
Frank and Honza et. al.
Thanks for your help, i'm now trying to compile the 0.9.0rc2 ALSA
Honza says he has the same board as me so i'm following his instructions, using the configure.dif patch and his instructions to use the via8233 driver not the ALS4000
however i get a configure error after i'
At Wed, 26 Jun 2002 12:06:27 -0700,
Alexander Carôt wrote:
>
> Hej to all,
>
> I'm running Linux on an iBook that has no soundin jack so I have to use USB.
> Can anyone tell me if and how this is supported under ALSA ?
>
> I thought about buying an external USB device but I wonder how comes tha
Hej,
in order to convert some sound applikations to OS X I need ALSA for it. Is
there anyone who ever tried running it this way or are there any ideas ?
-- A l e x
---
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
Dne čt 27. červen 2002 01:50 jste napsal(a):
> Hey, I was wondering how I could get sound to work on my MSI KT3 Ultra-ARU
> motherboard. I'm too new to all this stuff; modprobing any module doesn't
> have any effect and I'm lost now.
>
Download latest testing alsa driver,libs utils (0.9rc2 in thi
17 matches
Mail list logo
