You replied so quickly, thanks very much.
here is the dmesg. .... hub.c: USB new device connect on bus2/2, assigned device number 2 usb.c: USB device 2 (vend/prod 0xa92/0x51) is not claimed by any active driver ... ... and I load moudule manualy. kernel says. usb.c: registered new driver snd-usb-audio I marked comment about sound module in rc.sysinit and modules.conf and I moved module another pci sound card. On Thu, 27 Jun 2002, Takashi Iwai wrote: > At Fri, 28 Jun 2002 00:44:18 +0900 (KST), > Song KiSun wrote: > > > > I alredy compiled and installed lib and utils. > > > > and, I attatched lsusb result. > > > > There is no problem on device. I checked in Windows. > > ok, the device can be seen from linux, too. > (but according to the output of lsusb, apparently this device supports > only 24bit format with 44.1/48kHz.) > > did you check the kernel messages? > > > Takashi > ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
