Re: [AFMUG] Drop cable plowing cost

Do you trench, bore, plow, missile, or? We have a nice little stand behind Ditch Witch drop plow that works well in yards. Very fast too. Sent from my iPhone > On Nov 7, 2018, at 1:18 PM, Chuck McCown wrote: > > No > > Sent from my iPhone > >> On Nov 7, 2018, at 1:15 PM, Jon Langeler wrot

Re: [AFMUG] OT: Powered Subwoofer Hum

I use RG6 coaxial and have not had this issue On Wed, Nov 7, 2018 at 8:48 AM wrote: > I can think of three causes: > > 1)Electrostatic induced hum. Probably not the problem due to low > impedances of speaker circuits, but can easily be cured by shielding the > cable. > > 2)Power line ma

[AFMUG] PTP 450 365 with Ethernet Issues

Guys, I have a backhaul that is driving me nuts. We have a 6.9 mile link from our NOC to the site. The Master at the NOC is exhibiting ehternet errors up the wazoo when loaded. During prime time, we are pushing about 70 mbps through the link. Wirelessly, everything is perfect, 106/19 with 99% link

Re: [AFMUG] PTP 450 365 with Ethernet Issues

Some recommended questions for a difficult case like this: Is the line at 100 or 1000 mbit? Are both ethernet ends set to autodetect speed/duplex? What brand of cable? Is it shielded? Are both metal ends correctly connected to the shield? Do you have a main ground line between the tower metal and i

Re: [AFMUG] Wasps

We had the same issue with bees. Even the bee savers guys couldn't do anything and we tried 2 of them. Told us to find some exterminators. Rory -Original Message- From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of David M Sent: Wednesday, November 7, 2018 6:05 PM To: af@af.afmug.co

Re: [AFMUG] PTP 450 365 with Ethernet Issues

Radio is capable of 100mbps and is connected at 100mbps FDX Both ends are on auto. Primus Cat6 shielded I have shielded ends on both sides. Can you explain to me by what you mean by correctly connected? I have the drain wire connected to the RJ45 Tab on both ends We have the tower grounded to t

Re: [AFMUG] PTP 450 365 with Ethernet Issues

Although note that RcvFifoNoBuf I believe is not a cable error but a too-much-traffic error, which would suggest that it's being maxed out vs the radio link. Outdiscards I believe also not a cable error, but I don't know On Thu, Nov 8, 2018 at 10:47 AM Sam Lambie wrote: > Guys, > > I have a back

Re: [AFMUG] PTP 450 365 with Ethernet Issues

I see 0 CRC errors which typically indicate a good Ethernet Connection. Not sure wiring is your issue? Ryan Hill Operations Manager Amplex Internet (419)837-5015 Ext 1047 www.amplex.net > O

Re: [AFMUG] PTP 450 365 with Ethernet Issues

On 11/8/18 9:34 AM, Sam Lambie wrote: Yeah I know, this is what is driving me nuts. The RF looks good, but it drops packets like mad on the ethernet side. the switch it is connected to is a gig port. Kind of looks like a bursty traffic thing to me rather than anything being broken. You could

Re: [AFMUG] PTP 450 365 with Ethernet Issues

If it's not Colin's issue, what about flow control issues? On 11/08/2018 10:10 AM, Seth Mattinen wrote: On 11/8/18 9:34 AM, Sam Lambie wrote: Yeah I know, this is what is driving me nuts. The RF looks good, but it drops packets like mad on the ethernet side. the switch it is connected to is a

Re: [AFMUG] PTP 450 365 with Ethernet Issues

I try to rate limit the SM to 50/10 or a combo that meets your needs below 70mbps total. Ryan Hill Operations Manager Amplex Internet (419)837-5015 Ext 1047 www.amplex.net > On Nov 8, 2018

Re: [AFMUG] PTP 450 365 with Ethernet Issues

On 11/8/18 10:22 AM, Robert Andrews wrote: If it's not Colin's issue, what about flow control issues? Flow control should show up as pause frames (or something with "pause" in the stat name) if the devices support it. But yea if the device supports it it would send a pause frame saying hey w

Re: [AFMUG] PTP 450 365 with Ethernet Issues

You nailed it because thats what I see on some of my ptp links when they reach max throughput.. Which means shame on me for not noticing sooner but we upgrade the link to a higher capacity or add additional link to help with offload. Problem fix till both links max out LOL PTP820C to the rescue

Re: [AFMUG] PTP 450 365 with Ethernet Issues

It's a Perl magic with rrdtool, i’m hearing. I just see the fancy colored side. Ryan Hill Operations Manager Amplex Internet (419)837-5015 Ext 1047 www.amplex.net > On Nov 8, 2018, at 3:13

Re: [AFMUG] Drop cable plowing cost

I always thought this device looked interesting. Obviously not good for hard pan or really rocky areas but looks effective. "Bury 100ft of wire 10in deep in 10 minutes without any mess. https://www.youtube.com/watch?v=kNqOXul-GOQ"; Thank You, Brian Webster www.wirelessmapping.com www.Broadband-

Re: [AFMUG] Drop cable plowing cost

I remember folks using this method back in 1964 at my parents house. -Original Message- From: Brian Webster Sent: Thursday, November 8, 2018 4:38 PM To: 'AnimalFarm Microwave Users Group' Subject: Re: [AFMUG] Drop cable plowing cost I always thought this device looked interesting. Obvi

Re: [AFMUG] Drop cable plowing cost

I've done that, but I use a narrower spade.  I have doubts about something that wide penetrating the soil around here. On 11/8/2018 7:20 PM, ch...@wbmfg.com wrote: I remember folks using this method back in 1964 at my parents house. -Original Message- From: Brian Webster Sent: Thursday

Re: [AFMUG] Drop cable plowing cost

The phone company back in the day had a semi circular disk on a shovel handle. It was sharpened and had flanges bent over on the top just like a shovel for stepping on. They would step on it and rock it back and forth. Then come along with the drop cable and a piece of lath pushing the cable

Re: [AFMUG] Drop cable plowing cost

I've done that too, and... yeah. I also have doubts that you could do 100ft in 10 minutes, even with something that wide. Perhaps if the soil is pretty much sand. On Thu, Nov 8, 2018 at 6:56 PM Adam Moffett wrote: > I've done that, but I use a narrower spade. I have doubts about > something tha

Re: [AFMUG] Drop cable plowing cost

Maybe after soaking the ground for thirty minutes... On 11/8/18 5:22 PM, Mathew Howard wrote: I've done that too, and... yeah. I also have doubts that you could do 100ft in 10 minutes, even with something that wide. Perhaps if the soil is pretty much sand. On Thu, Nov 8, 2018 at 6:56 PM Adam

Re: [AFMUG] Drop cable plowing cost

Chuck, We do almost all drops with an older case Maxi-Sneaker. Ours has the trencher and roto-bore attachment for crossing driveways so it's quite versatile. Running a drop can take us from 15 mintues to several hours depending on distance and complexity. The maxi-sneaker is a good fit for FTTH in