Maybe after soaking the ground for thirty minutes...
On 11/8/18 5:22 PM, Mathew Howard wrote:
I've done that too, and... yeah. I also have doubts that you could do
100ft in 10 minutes, even with something that wide. Perhaps if the soil
is pretty much sand.
On Thu, Nov 8, 2018 at 6:56 PM Adam Moffett <dmmoff...@gmail.com
<mailto:dmmoff...@gmail.com>> wrote:
I've done that, but I use a narrower spade. I have doubts about
something that wide penetrating the soil around here.
On 11/8/2018 7:20 PM, ch...@wbmfg.com <mailto:ch...@wbmfg.com> wrote:
> I remember folks using this method back in 1964 at my parents house.
>
> -----Original Message----- From: Brian Webster
> Sent: Thursday, November 8, 2018 4:38 PM
> To: 'AnimalFarm Microwave Users Group'
> Subject: Re: [AFMUG] Drop cable plowing cost
>
> I always thought this device looked interesting. Obviously not good
> for hard pan or really rocky areas but looks effective.
>
> "Bury 100ft of wire 10in deep in 10 minutes without any mess.
> https://www.youtube.com/watch?v=kNqOXul-GOQ";
>
>
> Thank You,
> Brian Webster
> www.wirelessmapping.com <http://www.wirelessmapping.com>
> www.Broadband-Mapping.com <http://www.Broadband-Mapping.com>
>
> -----Original Message-----
> From: AF [mailto:af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>] On Behalf Of Chuck McCown
> Sent: Thursday, November 08, 2018 8:34 AM
> To: AnimalFarm Microwave Users Group
> Subject: Re: [AFMUG] Drop cable plowing cost
>
> Do you trench, bore, plow, missile, or? We have a nice little stand
> behind Ditch Witch drop plow that works well in yards. Very fast
too.
>
> Sent from my iPhone
>
>> On Nov 7, 2018, at 1:18 PM, Chuck McCown <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
>>
>> No
>>
>> Sent from my iPhone
>>
>>> On Nov 7, 2018, at 1:15 PM, Jon Langeler
<jon-ispli...@michwave.net <mailto:jon-ispli...@michwave.net>>
>>> wrote:
>>>
>>> Including the duct?
>>>
>>> Jon Langeler
>>> Michwave Technologies, Inc.
>>>
>>>
>>>> On Nov 7, 2018, at 2:31 PM, Chuck McCown <ch...@wbmfg.com
<mailto:ch...@wbmfg.com>> wrote:
>>>>
>>>> I charge $5/ft for quad 1.25” ducts with my big RT120 plow. So
that
>>>> is a realistic upper limit. Depends on what kind of machine and
>>>> whether you are doing it ac a pure contractor, or doing it for
>>>> yourself at cost, or doing it at just payroll and fuel to
minimize
>>>> the bite.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Nov 7, 2018, at 10:14 AM, Adam Moffett
<dmmoff...@gmail.com <mailto:dmmoff...@gmail.com>>
>>>>> wrote:
>>>>>
>>>>> Do you guys charge to plow in a drop cable? If so, how much.
>>>>>
>>>>> I know someone who's getting a 1/4 mile drop plowed up to his
>>>>> house by a competitor and they're charging him about $600. That
>>>>> works out to $.50/foot.
>>>>>
>>>>> My initial thought was I'd do 300' for free and then $1/foot.
>>>>> Then I'd be at about $1,000 for something the other guys are
doing
>>>>> for $600. I'm not looking to rob myself, but also not looking to
>>>>> price myself out of the market.
>>>>>
>>>>>
>>>>> --
>>>>> AF mailing list
>>>>> AF@af.afmug.com <mailto:AF@af.afmug.com>
>>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>>
>>>> --
>>>> AF mailing list
>>>> AF@af.afmug.com <mailto:AF@af.afmug.com>
>>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>>>
>>> --
>>> AF mailing list
>>> AF@af.afmug.com <mailto:AF@af.afmug.com>
>>> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
