lf Of Nate Burke
Sent: Friday, March 13, 2020 1:21 PM
To: AnimalFarm Microwave Users Group
Subject: Re: [AFMUG] 450SM command line syntax
No, the SM isn't associated, and I'm only able to telnet to it from the
Mikrotik that it's plugged into which I still have access to via a
differe
Users Group
Subject: Re: [AFMUG] 450SM command line syntax
No, the SM isn't associated, and I'm only able to telnet to it from the
Mikrotik that it's plugged into which I still have access to via a
different path. So without setting up a tunnel, I can't get HTTP to it
withou
There are a lot of options that could get me to the SM so I could bring
up HTTP. But I wanted to just do a quick check via Telnet without
having to do a bunch of network reconfiguration for an SM that either
died, or got mis-aligned. It sounds like that's not actually possible.
On 3/13/2020
I test/provision 450s through a Mikrotik using NAT rules to access the
radio's 169.254.1.1 address via the tik's IP on my LAN. Just add a
169.254.0.0/16 address to the radio interface, setup a dstnat rule pointing
port 80 to 169.254.1.1, and a masquerade rule on the radio's interface.
On Fri, Mar
No, the SM isn't associated, and I'm only able to telnet to it from the
Mikrotik that it's plugged into which I still have access to via a
different path. So without setting up a tunnel, I can't get HTTP to it
without going on site.
On 3/13/2020 12:14 PM, Ken Hohhof wrote:
You can't even get
You can't even get to the GUI via the AP web proxy?
-Original Message-
From: AF On Behalf Of Nate Burke
Sent: Friday, March 13, 2020 11:52 AM
To: Animal Farm
Subject: [AFMUG] 450SM command line syntax
I have a 450SM that because of some network reasons, I can only telnet to.
Is there a
