There are a lot of options that could get me to the SM so I could bring
up HTTP. But I wanted to just do a quick check via Telnet without
having to do a bunch of network reconfiguration for an SM that either
died, or got mis-aligned. It sounds like that's not actually possible.
On 3/13/2020 12:44 PM, castarritt . wrote:
I test/provision 450s through a Mikrotik using NAT rules to access the
radio's 169.254.1.1 address via the tik's IP on my LAN. Just add a
169.254.0.0/16 <http://169.254.0.0/16> address to the radio interface,
setup a dstnat rule pointing port 80 to 169.254.1.1, and a
masquerade rule on the radio's interface.
On Fri, Mar 13, 2020 at 12:22 PM Nate Burke <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
No, the SM isn't associated, and I'm only able to telnet to it
from the
Mikrotik that it's plugged into which I still have access to via a
different path. So without setting up a tunnel, I can't get HTTP
to it
without going on site.
On 3/13/2020 12:14 PM, Ken Hohhof wrote:
> You can't even get to the GUI via the AP web proxy?
>
> -----Original Message-----
> From: AF <af-boun...@af.afmug.com
<mailto:af-boun...@af.afmug.com>> On Behalf Of Nate Burke
> Sent: Friday, March 13, 2020 11:52 AM
> To: Animal Farm <af@af.afmug.com <mailto:af@af.afmug.com>>
> Subject: [AFMUG] 450SM command line syntax
>
> I have a 450SM that because of some network reasons, I can only
telnet to.
> Is there a way to run an APEval from the command line and/or
Change the
> color code? I didn't see it listed in the 'help' option.
>
> --
> AF mailing list
> AF@af.afmug.com <mailto:AF@af.afmug.com>
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
>
>
--
AF mailing list
AF@af.afmug.com <mailto:AF@af.afmug.com>
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
