I test/provision 450s through a Mikrotik using NAT rules to access the radio's 169.254.1.1 address via the tik's IP on my LAN. Just add a 169.254.0.0/16 address to the radio interface, setup a dstnat rule pointing port 80 to 169.254.1.1, and a masquerade rule on the radio's interface.
On Fri, Mar 13, 2020 at 12:22 PM Nate Burke <n...@blastcomm.com> wrote: > No, the SM isn't associated, and I'm only able to telnet to it from the > Mikrotik that it's plugged into which I still have access to via a > different path. So without setting up a tunnel, I can't get HTTP to it > without going on site. > > On 3/13/2020 12:14 PM, Ken Hohhof wrote: > > You can't even get to the GUI via the AP web proxy? > > > > -----Original Message----- > > From: AF <af-boun...@af.afmug.com> On Behalf Of Nate Burke > > Sent: Friday, March 13, 2020 11:52 AM > > To: Animal Farm <af@af.afmug.com> > > Subject: [AFMUG] 450SM command line syntax > > > > I have a 450SM that because of some network reasons, I can only telnet > to. > > Is there a way to run an APEval from the command line and/or Change the > > color code? I didn't see it listed in the 'help' option. > > > > -- > > AF mailing list > > AF@af.afmug.com > > http://af.afmug.com/mailman/listinfo/af_af.afmug.com > > > > > > > > > -- > AF mailing list > AF@af.afmug.com > http://af.afmug.com/mailman/listinfo/af_af.afmug.com >
-- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com
