Thanks to all. Got it running. Not sure what I was doing wrong, but reworked
options files, whacked and recreated cad scheduler services, and all worked as
I hoped.
Now for the testing.
Get the following message when backing up a Ubuntu 12 server with tsm client
6.3.0.
01/13/14 12:37:12 ANS4042E Object name
'/usr/share/ca-certificates/mozilla/TÜBİTAK_UEKAE_Kök_Sertifika_Hizmet_Sağlayıcısı_-_Sürüm_3.crt'
contains one or more unrecognised characters and is not valid.
A couple of questions.
How large is your db?
What disk hardware is it stored on?
Is that hardware shared with any other file systems?
What are those file systems and what used for?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Mondore, E Andr
Is there a way to determine the wwpn and serial number defined for each fc port
on a ts1120 drive without connecting it to a fc switch?
I have been through the 3592 operator's guide and have not found anything.
I am preparing for a tsm 5.5 to 6.2.5 upgrade. I would like to prerun cables
from the
:50, Lee, Gary wrote:
> Is there a way to determine the wwpn and serial number defined for each fc
> port on a ts1120 drive without connecting it to a fc switch?
> I have been through the 3592 operator's guide and have not found anything.
>
> I am preparing for a tsm 5.5 to 6.
We are upgrading our server from v5.5.4 to 6.2.5. At the same time, we are
changing platforms to redhat on x86 from suse under vm.
I have tested the upgrade process, and it seems to work well.
In the current 5.5 server, the primary tape pool uses the same devclass as the
offsite copy pool.
I no
If it is in a primary storage pool, issue
Restore vol vome_name preview=yes
Then monitor for process completion.
Then check the activity log for anr1255 messages.
These will show what offsite volumes were unavailable but required for the
restore.
Then get those volumes onsite and checked into
Try this
Select node_name, schedule_name, domain_name from associations where
node_name=upper('node you wish to find')
This will show you any schedules associated with that node.
Also will show what domain that node is in.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-
Original server is 5.5.4 running on suse linux sles9 as a guest under vm.
Destination server is 6.2.5 on hp 585 server under rhel 6.
Run the prepare db
And extract db commands.
Extract output goes to an nfs mounted file system on the target server.
Then, on target server do the dsmserv insert db
Best practice is to keep db backups as far back as the longest reusedelay on
tape pools.
Otherwise you can't go back to a previous state.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tom
Taylor
Sent: Monday, February 17, 2014 9:27 AM
To: AD
Check your volume history backup files. They are plain text files. Do a
backward search from the bottom and you wil find its last reference.
IT is probably a database backup.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of r4mzeso
Sent: Mond
Looking at updating our tape libraries for other rojects which might use ltfs.
We currently have the ibm 3494 library with 3592-e05 (ts1120) drives.
It seems that we must go to the 3584 to get access to lto type tapes, yet keep
using our e05s for tsm.
I would like to hear others experiences with
I am now attempting to share libraries containing IBM ts1120 drives between two
tsm servers on HP hardware running RHEL 6.
It appears that I will need to use the dm-multipath system to manage the
various fc paths to all the drives.
Got dm-multipath installed, but now trying to configure so it w
t freundlichen Grüßen / Kind regards
>
> Michael Prix
>
> On 05/22/2014 09:14 PM, Lee, Gary wrote:
>> I am now attempting to share libraries containing IBM ts1120 drives between
>> two tsm servers on HP hardware running RHEL 6.
>>
>> It appears that I will need to
Reverse the order. Includes and excludes are processed bottom up.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim
Brown
Sent: Wednesday, June 11, 2014 3:05 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] include \ exclude
Attempting to inclu
Ok, downloaded the most recent client 6.4.2 directly from the site.
Adjusted the installation sample lines from the readme as required for the
gskcrypt and gskssl version.
Tried to run then and get the following for many files, and the api won't
install.
file /opt/tivoli/tsm/c
What are you folks using to get the mac client from IBM’s site?
using safari, I get a message that the share is not found on the ftp site.
tried the command line ftp client, but doesn’t work well with voiceover (mac
screen reader).
any help welcome.
In-Reply-To:
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [147.226.162.252]
x-microsoft-antispam: BCL:0;PCL:0;RULEID:
x-forefront-prvs: 0255DF69B9
x-forefront-antispam-report:
SFV:NSPM;SFS:(6009001)(377424004)(51704005)(1346400
Is there or is there in planning, tsm for VE for hyper-v?
We use both vmware and hyper-v and would like to standardize our backups.
Tsm client
Tsm client 6.2.3.1 on win 2003 box.
Tsm server 6.2.5 on RHEL 6.
Get the following error in dsmerror.log (ironic given the text of the message).
Any help would be appreciated.
08/01/2014 12:31:52 Return code 653 unknown
08/01/2014 12:31:52 Unknown system error
Please check the TSM Erro
We just finished a trial of the panzura box using amazon storage.
Setup was quite easy. Configured the box with a ssl cert, pointed it to our
amazon account, and configured its nfs settings.
Then mounted it to our tsm server and set up a sequencial pool to point to that
mount point.
We did jus
TSM for ve 6.4, tsm server 6.2.5 on RHEL 6.1
Data movers on RHEL 6.1.
Ran our first backup of a production vmware host.
We thin provision our vms.
One is provisioned at around 1 tB. However, according to our vmware admin, it
is using only around 238 gB of disk at this time.
When we ran the back
Just went through the tsm for ve info center for v7.1.
Cannot find pdf downloads, and my screen reader won't show me the system
requirements doc.
Would someone please send me a url for downloadable docs for the latest tsm for
ve?
Thanks for any help.
ehalf Of Lee,
Gary
Sent: Thursday, August 28, 2014 9:34 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] tsm for ve 7.1 docs request
Just went through the tsm for ve info center for v7.1.
Cannot find pdf downloads, and my screen reader won't show me the system
requirements doc.
Would someone p
Attempting to check and if necessary tune my tsm servers.
All are RHEL 6.1 and tsm 6.2.5.
In the perf guide it references the db2osconf command.
However, I find no such beasty on either of my servers.
Where do I get this?
I have run myself ragged on this one.
I would have sworn it worked yesterday morning.
Tsm server 6.2.5 under RHEL 6.1
I am trying to get a list of nodes not in a collocgroup.
Statement follows:
Select a.node_name from nodes a where
a.node_name not in (select b.node_name from collocgroup b)
Than
ect a.node_name from nodes a where -
a.node_name not in (select b.node_name from collocgroup b)
On Thu, Sep 11, 2014 at 5:51 AM, Lee, Gary wrote:
> I have run myself ragged on this one.
> I would have sworn it worked yesterday morning.
>
> Tsm server 6.2.5 under RHEL 6.1
>
> I
query.
select NODE_NAME, COLLOCGROUP_NAME from nodes
select count(*) from nodes where COLLOCGROUP_NAME is NULL
Hope this helps,
Bill
On 9/11/2014 8:18 AM, Lee, Gary wrote:
> Nick:
>
> Just tried a cut and paste directly into the admin client.
>
> Same results,
>
> Anr2034E no r
Yes.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of George
Huebschman
Sent: Wednesday, September 17, 2014 4:18 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Defining a script that references a file
Is this just the way that scripts referencing
George:
I have a script defined which will "redefine" a script.
It deletes and redefines in one step.
It relies on the fact that I name the source files the same as the scripte, and
all reside in one particular directory.
Then I just update script with the description I want.
I will send if you
Easiest way is to creat a shell script for what you want to do.
Then do a
Crontab -l >filename
This saves your current crontab.
Edit that file, adding the shell script you just created.
Then do a
Crontab filename
This will create a new crontabe from everytning in the file you just edited.
references a file
Hi Lee,
Thank you so much your explanation .
i want to know how to add this file for executing in particular time
(means how to add time and date in corntab for this file)
Thanks & Regards,
Srikanth kola
Backup & Recovery
IBM India Pvt Ltd, Chennai
Mob: +91 98854734
What is the Tivoli product called for administering tsm via a web based gui?
I don't really care, but my boss wants me to evaluate gui tsm management
products.
What is the sens of the list? IBM, or third party, if so what third party?
ended up using the CLI and haven't looked
back since.
On Tue, Sep 23, 2014 at 01:12:15PM +0000, Lee, Gary wrote:
> What is the Tivoli product called for administering tsm via a web based gui?
>
> I don't really care, but my boss wants me to evaluate gui tsm management
> pro
Looked in the db2 manuals, didn't see what I wanted.
Tsm 6.2.5 under RHEL 6.1
Is there a way to trim trailing whitespace from string fields within a select
statement?
Looked at the trim function, but it didn't appear to be what I needed.
Thanks for the help.
Rtrim did it.
Was looking in the wrong volume of the sql reference.
Thanks.
I may have confused myself here.
Tsm server 6.2.5, rhel 6.1, ibm 3494 library and ts1120 drives.
If I issue a
Udevadm info -attribute-walk
For all /dev/IBMtapexx devices I get a listing of everything that can be
determined about these drives.
When defining these drives to tsm, which do I use f
I have two dual port hbas per tsm server. Both servers are hp servers running
RHEL 6.1.
I would like to spread the i/o over all four FC ports.
Is zoning the only way?
Currently all our tape devices and the tsm servers run to one FC switch.
We have 12 drives in our onsite library, and 12 in our
Working on a problem with ibm.
Instructions are to use
Dsmc -traceflag=service -tracefile=filename
However, I have no remote access to the server. Therefore I must edit the
dsm.opt and schedule the test backup.
Tried the following:added
Traceflag service
Tracefile filename
To dsm.opt. got
Tsm server 6.2.5, on rhel 6
Client 5.3.6.7 on windows 2000.
Does this old client version support image backups?
Can't come up with my manuals for this version.
We are backing up our vmware environment (approximately 110 vms), using tsm for
ve 6.4.2 tsmserver 6.2.5 under redhat 6.1.
The backup destination is disk. Trouble is all data is owned by the datacenter
node; consequently, migration has only one stream.
I do not currently have enough tape drive
] breaking up tsm for ve backups into different nodes
Update stg STOAGEPOOL_NAME MIGPRocess=XXX where XXX is how many threads you
want for your migration process.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Lee,
Gary
Sent: Tuesday, December 16
Tsm 6.2.5 running on RHEL 6.1.
Install guide says you can upgrade straight to 7.1.1 from 6.2.x.
Extract the package downloaded from passport advantage, run install.sh.
Pick tsm server and tsm license to install.
Take default shared resource directory
Accept license agreement
Select install.
I ge
We are running vmware 5.1, using tsm for ve 6.4.2, and using nfs data stores.
It appears that change block tracking does not work with tsm for ve on nfs data
stores.
This is forcing full backups every night.
Our environment is currently over 14 tB and growing.
With this limitation, we will not be
Tsm server 6.2.5, on rhel 6.1.
How can I get a list of volumes in a backupset?
Been through the reference, must just be overlooking it.
Thanks for any help.
Looks like I won't be going to v7 for a while. I have v5 clients still active
with no end in site.
I am upgrading from 6.2.5 on RHEL 6.1. What is the wisdom of the group, go to
6.3.x or 6.4.x?
We do no dedup here and have no plans for it.
However,we do use tsm for ve.
Thankns for any help.
Looking for what process creates and/ or changes the file
/opt/Tivoli/tsm/tdpvmware/tsmcli/bin64/dsm.sys
Somehow this is getting an incorrect server address. I wish to change that,
and, have edited by hand.
It then gets changed back.
Any assistance is appreciated.
You need to give it the start of a filename or a complete name. such as one of
the following.
tsm: PROD-TSM01-VM>def volume nastocpool
/tsminst1/toc_volume/vol n=1 formatsize=10240
or:
tsm: PROD-TSM01-VM>def volume nastocpool
Thank you Wanda for all your help and advice through the years.
May you enjoy your retirement, and not think about tsm or sql unless you want
too.
I appreciate all you have taught me.
Is there a list somewhere of the possible values for different columns in the
tsm database?
What I am particularly looking for are all the possible values of the status
column in the events table.
Writing a script to notify backup schedules which have gone amiss.
Don't care about restarted, in
Thanks all.
Did the alian on the packages, edited control file as per an article found on
the web.
iNstalled, but now get
can't open shared library gpfs.so.
where should this be linked?
Adding a new server to our tsm installation.
Will be installing on redhat 6.5, and using strictly for tsm for ve.
Would really like to get to version 7, but having heard of the restore problems
with 7.1.1, wondering what the sense of the list is on most stable version.
Any information welcome.
An easier way to tell vms that are completed is as follows:
Q act begind=date begint=time msg=4142
Errors are msg=4144
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Billaudeau, Pierre
Sent: Friday, April 24, 2015 7:43 AM
To: ADSM-L@VM.MARIST
Am I reading the tsm client requirements table correctly in saying that the
latest client for windows 2003 is v6.2.5?
If that is the case, what to do if a person installed 6.3.2 and did a backup?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Lee,
Gary
Sent: Friday, April 24, 2015 1:21 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] windows 2003 and tsm client questions
Am I reading the tsm client requirements table correctly in saying that
Using the client acceptor on a Ubuntu system.
In the dsmcad script, I am exporting
LANG=en_US
As specified in the manual, but still getting ans4042e messages about
unrecognized characters in the file name.
This is an ongoing problem on both redhat and Ubuntu systems that I have not
been able
usual trouble backing up invalid file names
6.4.2 client on ubuntu
Try LC_CTYPE=en_US also
Robert Ouzen
Haifa Universty
נשלח מהטלפון הנייד של Samsung
הודעה מקורית
מאת: "Lee, Gary"
תאריך:29/04/2015 17:33 (GMT+02:00)
אל: ADSM-L@VM.MARIST.EDU
נושא: [ADSM-L] the usu
Servers running on redhat enterprise 6.1 and 6.5.
Trying to set open files, max processes, etc for the dsmserv process.
Tried using /etc/security/limits.conf, but no help.
Looking in /proc/process-id/limits
Open files is 4096.
However, set at 8192 for soft and 10240 for hard in /etc/security/li
g, say so
Hope that helps,
-Nick
On Mon, May 18, 2015 at 9:14 AM, Lee, Gary wrote:
> Servers running on redhat enterprise 6.1 and 6.5.
>
> Trying to set open files, max processes, etc for the dsmserv process.
>
> Tried using /etc/security/limits.conf, but no help.
> Looking in
We are looking at replacing our 3494 libraries with 3584s.
Thinkk that is the correct number.
Are they similar enough that I can simply check out the volumes from the old
libraries and check into the new?
We are keeping our ts1120 drives and transferring them into the new robots.
Anyone with ex
Have the following script, but when I run on a 6.2.5 server using a 6.4.2
command line client no trimming is done.
Lines are thousands of characters long.
Script follows:
SELECT rtrim(node_name), -
rtrim(filespace_name), -
filespace_id, -
rtrim(filespace_type), -
DATE(backup_end) as "backup DATE
Tsm server 6.2.5
TDP for vmware 6.4
I have the vmware data pool defined as a sequencial file pool, to facilitate
migration.
However, last night the server claimed it was out of data storage space, but
there is 18% of a 14 tb pool free.
I checked, and the only limit reached was maxscratch.
Is
ut of data storage space regardless of how much space is in your
filesystem.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Lee,
Gary
Sent: Monday, June 08, 2015 10:32 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] server out of storage space
, pct_reclaim from volumes order by
2,3
This will show you which volumes are in FILLING state and therefore
eligible to be written to. What are your reclaim values - are you freeing
up tapes via reclaim in the VM pool?
On 8 June 2015 at 18:15, Lee, Gary wrote:
> My question here is that 59
We have a restore request which has so many files an dsubdirectories that the
client is timing out before restoration can start.
Can anyone help with a sql query which will get me a list of all next level
subdirectories under the master directory?
All objects will be inactive, as the originals
Is there any way to schedule a client restore?
I don't think so, but thought I'd check to see if I missed something somewhere.
Didn't see any way in the book, and tried with no success.
need to restore.
On Wed, Jun 10, 2015 at 4:20 PM, Zoltan Forray wrote:
> Don't see why not. When I try to define a client schedule, one of the
> options for "ACTION" is RESTORE....
>
> On Wed, Jun 10, 2015 at 4:15 PM, Lee, Gary wrote:
>
>> Is there any way to s
Getting the following error on one vm.
It is preceeded by ans4715, which indicates there is nothing to back up.
ANS4174E Full VM backup of VMware Virtual Machine 'VMName' failed with RC=4379
mode=Incremental Forever - Incremental, target node name='nodename', data mover
node name='movername'
Fo
174e can't find my return code
I think you’ll find more help in the data mover’s dsmsched.log or dsmerror.log.
K.
> On Jun 17, 2015, at 11:38 AM, Lee, Gary wrote:
>
> Getting the following error on one vm.
> It is preceeded by ans4715, which indicates there is nothing to bac
Currently running tsm server 6.2.5.
Yes, I know its back level, working on upgrading asap.
Would like to get to tsm for ve 7.1.x. What is the tsm server requirement if
any?
As soon as I get my pmr for installing 7.1.2 resolved, I start testing for the
server upgrade to that version.
Thanks f
Trying to find this client. Where does it live?
We are licensed for tsm extended edition, tdp for databases, hsm, and other
stuff.
Tsm server 6.2.5, RHEL 6.5.
I know, out of support, trying to get to 6.3.4 next week.
Suddenly I am getting "anr1880w" messages.
Processes being cancelled because of conflicting locks on table af_bitfiles.
Never seen these before.
Happened while reclamation was running.
Also similar this mornin
tthew McGeary
Technical Specialist - Infrastructure
PotashCorp
T: (306) 933-8921
www.potashcorp.com<http://www.potashcorp.com>
From: "Lee, Gary"
To:ADSM-L@VM.MARIST.EDU
Date:07/27/2015 01:55 PM
Subject:[ADSM-L] anr1880w and other db lock conflicts sudde
Been unable to send, just testing.
I just voted for it.
I nearly always have at least three admin client windows open.
Being totally blind, the command-line stuff is very screen reader friendly.
I hate java GUIs in all their forms
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf O
Hoping to get upgraded to tsm server 7.1.x within the next month.
At that time, we are considering changing our storage strategy to all random
disk pool.
This because we cannot do a file level restore from a vmware backup from
sequencial media, (be it tape or disk).
Has anyone done this, or is
; wrote:
> Gary,
>
> TSMVE 7.1.2 makes file level restores a reality. You may want to work
> with them a bit before deciding if you want to go to all random disk.
>
> David
>
> -Original Message-
> From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Beha
: Monday, August 24, 2015 3:37 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] going to all random disk pool for tsm for ve
But if enough volumes are in the filling state this is not a problem and
may I ask why use collocation on a filepool?
On Monday, August 24, 2015, Lee, Gary wrote:
>
We are trying to troubleshoot a problem with our tsm disk storage.
Tsm server 6.3.4 running on RHEL 6.5.
Our storage is a set of subdirectories on a file system mounted via nfs v3 to
all three of our tsm servers.
All goes fine until an attempt is made to define one or more volumes to a
storage
Client machine running win 2008-r2 64 bit under hyper-v.
Tsm client 6.4.2.
Several errors all related to vss. Extract from dsmerror.log follows.
09/09/2015 06:30:20 ANS5250E An unexpected error was encountered.
TSM function name : AddToSnapshotSet
TSM function : 'AddToSnapshotSet fail
SS error that the TSM client can't work around, it
needs to be fixed first, be sure to install all 2003 the hotfixes for VSS.
On Wed, Sep 9, 2015 at 3:04 PM, Lee, Gary wrote:
> Client machine running win 2008-r2 64 bit under hyper-v.
> Tsm client 6.4.2.
>
> Several errors all relat
Tsm server 6.3.4 under RHEL 6.5.
Getting continuous activations of a full db backup, apparently because the
archive log is not getting emptied.
What is the best way to trace this down?
I have forced a full db backup to tape, but it only postpones the reoccurrence
of a new full for a little whi
Have you checked for large, long running sessions/backups that are holding
the logs? We have seen this with TDP style backups getting stuck/not
finishing.
On Wed, Sep 23, 2015 at 3:21 PM, Lee, Gary wrote:
> Tsm server 6.3.4 under RHEL 6.5.
>
> Getting continuous activations of a full
Forced another full db backup, this time archive log emptied.
Log mirror hasn't emptied, but not to concerned about that.
Thanks all.
DSM-L] trouble with archive log not emptying
Hi Gary,
Any config info to share (size of log and archive in TSM and on OS?). Did
you reduce the active log by any change? Any relevant messages in the TSM
act log?
Kind regards,
Karel
2015-09-23 21:52 GMT+02:00 Lee, Gary :
> Currently, no long
The two backup commands are
Inc
For incremental, and
Sel
For selective backup.
Substitute either depending on the type of backup desired.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Michael Devenney
Sent: Thursday, October 29, 2015 9:
I have at least two linux clients v6.4 tsm server 6.3.4 whose bytes backed up
are nearly double the bytes inspected.
Compress is set to no.
I would like to find the offending files which are growing.
The following script shows files backed up yesterday, for a specific node,
(thanks andy raibeck
I have recently started having 1,698 errors during expiration.
In tsm 5, you would audit the database.
Now not sure how to go about determining then fixing the errors.
Recently audited the disk pool, after having to rebuild the server from scratch.
That took 72 hours.
No errors were found at that
Have a client with a new laptop. He installed tsm client tsm 7.1.3.1.
Set up client acceptor as usual, running as system account.
Start acceptor, all appears fine, client sees its schedule, and dsmwebcl.log
ends with
"waiting to be contacted by the server".
However, client misses its backup, eve
Tsm server 6.3.4 under redhat 6.7.
If I want to increase the size of the tsm active log, must I backup, reformat
and restore the database?
So far that's all I have found.
If not, where is the procedure for extending the log?
Thanks for the help.
Tsm server 6.3.4 on rhel 6.7
Got the server back up, and log moved to different filesystem.
However, it appears that the activelogsize directive is being ignored.
A q log says that the log is 32768 mb but activbelogsize is set to 57344.
How do I fix this?
Yes.
Make sure that you have at least double the size of your active and archive
logs as available free space in the respective log directories.
i.e. . if your active log size is 32 gB, insure that your log directory has
more than 64 gB free. Otherwise the database upgrade will fail on install.
16:51, Lee, Gary wrote:
> Yes.
>
> Make sure that you have at least double the size of your active and archive
> logs as available free space in the respective log directories.
> i.e. . if your active log size is 32 gB, insure that your log directory has
> more than 64 gB free.
@VM.MARIST.EDU
Subject: Re: [ADSM-L] Upgrade server from 6.3 to 7.1
Hello,
Is that requirement only for the upgarde?
Bye
Rainer
On 25.01.2016 18:50, Lee, Gary wrote:
> I never saw it in the docs.
>
> What I had to do was disable the server, do a full backup on the db, then
>
has finished.
I think this should be comparable to a new install.
So basically you need to reduce the size of your active log to 45% (to
be sure) of your archive space.
After the upgrade has finished you can extend the active log to the old
size.
Bye
Rainer
On 26.01.2016 14:17, Lee, Gary wrote
Keep us posted. I have had similar problems in the past year or so.
Only, I can't get any new hardware.
Still using hp 585 servers with 4 amd processors.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Zoltan
Forray
Sent: Tuesday, January 26
need to reduce my log sizes? All of my systems
have a 128GB filesystem just for active log. Most of them are ACTLOGSIZE
120GB
On Mon, Jan 25, 2016 at 10:51 AM, Lee, Gary wrote:
> Yes.
>
> Make sure that you have at least double the size of your active and
> archive logs as available f
II
> Technology Services Group
> Carilion Clinic
> 451 Kimball Ave.
> Roanoke, VA 24015
> Phone: 540-224-3903
> cdni...@carilionclinic.org
>
> Our mission: Improve the health of the communities we serve.
>
>
>
> ________
> From:
Tsm server 6.4.3,
RHEL 6.7
4 Dual-Core AMD Opteron(tm) Processor 8220 SE CPUs
128 gB memory
I recently installed an intel 10 gB Ethernet card.
Iperf3 test shown below gives around 7 gb throughput.
However, when running multiple migration and reclamation processes, and
watching network traffic thr
1 - 100 of 593 matches
Mail list logo
