Rolf
What is your device class mount limit? If it isn't already set to drives you
might want to set it to drives
Becky Davidson
Data Manager/AIX Administrator
EDS/Earthgrains
voice: 314-259-7589
fax: 314-877-8589
email: [EMAIL PROTECTED]
-Original Message-
From: Rolf Meyer [mailto:[EMA
Hi list members
We're running TSM v3.7.2 on OS/390 v2.9 with two communications drivers (IBM
TCP/IP v2.9 and Interlink TCPAccess SNSTCP v5.2). During the networks
maintenance slot, both TCP/IP and SNSTCP are bounced. TSM reports the loss
of the connections to these drivers as follows:
ANR5093E Un
Hi,
I think in the current state the module as changed by me is not mature
enough to be redistributed. At least I have to fix the test for the access
of the .dsmrc file by the owner only. At the moment just for testing this
test is commented out. Give me a week or two to figure out what to do.
Ac
Hello
Devclass mount limit is drives (we have four drives 3590E).
Greetings
Rolf
"Davidson, Becky" <[EMAIL PROTECTED]> am 05.02.2001 09:08:41
Bitte antworten an "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
An:[EMAIL PROTECTED]
Kopie: (Blindkopie: Rolf Meyer/Satisfactory)
Thema:
Trying to install ODBC on a WIN/NT SP4 (TSM 3.7 for windows/NT)
Getting severe error: could not load the setup or translator library IBM ODBC
for ADSM
Anyone familiar with this error? What am I missing and do I need to do ?
Tnx,
Xavier
Hello Xavier,
how did you install it? Did you use setup.exe or just execute the msi file?
I also had problems first time when I used the setup.exe. I think it should
be used only to install the MS installer on NT. The actual install should be
done by doubleclicking the msi file.
Best regards
Gerha
I have just done the same
the last version is is 3 . 1 . 2.90,
This can be downloaded from:
ftp://index.storsys.ibm.com/adsm/fixes/v3r1/aixsrv/LATEST.SERVICE
good morning
Davide Fanizzo
System Administrator
Banca Akros S.p.A.
Cell +39 348 8705668
Tel +39 02 43444040
- Original Message
Alyn
The first thing to do is go to the Tivoli
TSM web site:
http://www.tivoli.com/products/solutions/storage/
For specific information on the various "agents"
go to the Tivoli Data Protection for Applications web page:
http://www.tivoli.com/products/index/storage_mgr/addbase.html/
It l
Hi Gerhard and Xavier,
Xavier, you mention that you are trying to install TSM 3.7. Are you
installing this on a U.S. English version of Windows? ODBC Driver versions
below 4.1 are not supported on non-English systems.
Gerhard, you must be trying to install a 4.1 level of the ODBC driver if
you h
Is it possible to answer the question "How much (Mb) data that is over 1
year old is stored on my server?"?
The way I see this working is by joining the BACKUPS and CONTENTS tables.
The problem is that the join between these two tables cannot be perfectly done.
You cannot differentiate between ACT
Hello,
Please let me know if following is supported and anybody has used the
followings:-
Oracles (on NT) fail safe version 2.1.1 with TDP for oracle
NOVELL INTRANETWARE 4.11 WITH SFT III running with BA client of TSM.
With Best Regards,
Yashwant T Rane
IBM Global Services India Pvt.
I am aslo getting ANR8301E ANR8302E op=write errors. This started happening
after we upgraded to TSM 4.1. We are on WIN 2000 environment.
Raminder
> -Original Message-
> From: Kathleen M Hallahan [SMTP:[EMAIL PROTECTED]]
> Sent: Friday, February 02, 2001 6:55 PM
> To: [EMAIL PROTECTED]
>You cannot differentiate between ACTIVE and INACTIVE in the CONTENTS table,
>so that if you had three versions in the BACKUPS table, you would match each
>of these three times in the contents table...
Paul - In the BACKUPS table, a null value for the DEACTIVATE_DATE column
indicates that
> >You cannot differentiate between ACTIVE and INACTIVE in the CONTENTS
> table,
> >so that if you had three versions in the BACKUPS table, you would match
> each
> >of these three times in the contents table...
>
> Paul - In the BACKUPS table, a null value for the DEACTIVATE_DATE column
>
Group
We recently had a disaster recovery drill for our Unix Sun Box E10K, We had
a problem executing the DRM plan file created on the SUN box using the
Unix AWK command when trying to build the DRM scripts, we received SYNTAX
errors, we executed the same AWK command against the E10K DRM file
Hi *SMer,
one of our customers is making a backup of his DB2/2 V6.1 database once a day
and his files (One Backup = One File in the Database-Filespace!) are stored in a
filespace where the name of the filespace is the same as the DB2-Database-Name.
His Commands are:
1) to define the managementclas
> I use TSM 4.1.2 on Solaris 8 with BMC SQL Backtrack for Oracle. Trying
> to do a backup of a 300G SAP DB using more than one
> backup stream.
>
> SQL-BT starts two sessions to TSM, one gets a tape from 3494 lib, other
> stays on MediaW.
>
> Both stream go to same Managementclass/Storage Poo
We also get many ANR8302 errors. We are W2K server with TSM 4.1.2 server
(before 4.1.2, we were 4.1.0). Since this is a new server and never had
anything other than 4.1.x on it, and we have many other problems with the
tape drives, such as tapes getting stuck, we attributed these errors to bad
d
Hello
Now I have a NT4.0-related problem again.
I have installed the 4.1.2 TSM-client on another three NT4.0 (server)
nodes and gets a strange phenomena.
On one I get Dr.Watson if I try to back it up via the graphical backup
client but it runs OK by its scheduled tasks.
On the two other it seem
Hi Anders ,
the problem is known and will be corrected in Version 4.2
( ... don't know when ? )
Mit freundlichen Grüßen / best regards
Rainer Wolf
APAR Text
+++
ERROR DESCRIPTION:
If working with TSM 4.1.2 client for SUSE Linux f
stop storage pool
upd stg backuppool high=90 low=60
>>> [EMAIL PROTECTED] 2/1/01 5:53:35 PM >>>
TSM Server and clients 4.1.0 NT
One of my disk pools is performing the never-ending migration process. I'm
migrating from disk to one of two drives in a 3494. Migration is started
by
update stgpool
Hello,
our Db2 admin guy does specify the MGMT_class to use in the DB2 backup
command,
regards,
> -Original Message-
> From: Gerhard Wolkerstorfer [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, February 05, 2001 3:57 PM
> To: [EMAIL PROTECTED]
> Subject: DB2/2 Backup and Policy
>
> H
Gerald Wichmann wrote:
> That's not true. TDS 2.1 Includes an install options for "Tivoli 3.11 ODBC
> drivers". It includes drivers for Oracle, Informix, Sybase, and MSSQL. No
> DB2. So my question still stands. I have DB2 installed on an AIX box. I do
> not have an NT ODBC driver for the TDS box.
Hi all,
the company I work for is launching a "managed backup" service for
companies buying colocation at our premises. I am looking for
experiences and/or examples on this, how to set things up, what to
optimize etc. Is anybody doing something similar and is willing to
discuss it, or you know ab
Hi,
with the help of Andy Raibeck (thanks!) I got my perl script to work with
ODBC. The problem was that Active State Perl distribution used an old
version of WIN32::ODBC module.
Here is how it works for me on Windows 2000 Professional. I use the ODBC
driver from TSM client 4.1.2.
1. Get and ins
Are the drives themselves showing errors? That's one of the weird things we've
got...our CE has checked the drive logs and there are absolutely no errors to be
found.
I'm going to give our CE printed copies of all these emails so that he can pass
this along to Tuscon, unless anyone has any objec
I don't know what version of SunOS you are running but I see on 5.6 and
5.7 there is awk and nawk. They seem to be different files(filesize is
different and they aren't links). On AIX(4.2.1 & 4.3.3), I see that both
/usr/bin/awk and /usr/bin/nawk are the same size(coincidence?). That might
be your
Info for all,
Last Tuesday I upgraded my ADSM server running AIX 4.3.3 to TSM 4.1.2.0. For
all those concerned about the upgrade I must say it was quite easy. Since
I'm on AIX I can't speak for the other OS's.
My 3494 did have old Atape drivers so I had to update those, and while I was
at it I u
I have done this migration today, every thing worked except the creation of the new
TSM server service in Windows NT V4.
Is there any experience of the service not being created?
I could start the new server with the old database with the dsmserv command, but the
service was not created.
We ende
Hello out there !
I have a problem with my ADSM server it abend sometimes, with this message:
ANRD Invalid condition object at 0 - magic number mismatch; thread 40
(tid 0).
ANR7838S Server operation terminated.
0x10004BF0 TrapSyncError
0x10004B58 ValidateCondVar
0x10004E44 pkSignalCond
In our case the errors show up in activity log. The drive logs do not show
any errors. I don't have any objection of you passing the emails to Tucson.
Raminder Braich
SAP/Oracle DBA
The Davey Tree Expert Company
Kent OH 44240
330-673-9515 Ext 270
> -Original Message-
> From: Kathleen M H
I am running Win2K and I had TSM 4.1 client installed and was able to do all
my Crystal Reports with the ODBC driver. I upgraded to TSM 4.1.2.0 client
and followed the directions in the INSTALL.TXT for the ODBC driver. I
removed all my ODBC definitions, uninstalled TSM ODBC, rebooted and ran the
i
>ANRD Invalid condition object at 0 - magic number mismatch;
Peter - Searching the APAR database for "magic number mismatch"
turns up APAR IY14257. Have a look at that.
You may be able to avoid if circumstances can be adjusted.
Richard Sims, BU
>I don't know what version of SunOS you are running but I see on 5.6 and
>5.7 there is awk and nawk. They seem to be different files(filesize is
>different and they aren't links). On AIX(4.2.1 & 4.3.3), I see that both
>/usr/bin/awk and /usr/bin/nawk are the same size(coincidence?). That might
>be
-William-
Did you define the environment variable DSMG_DIR which should be pointing to
the directory where the message repository resides?
To correct this, follow these steps:
1. Add the following line to the AUTOEXEC.BAT file:
SET DSMG=C:\WIN32APP\IBM\ADSM\ODBC\ADSM
Note: The directory path
Since there's a lot of discussion on Perl scripts, i'm posting one i wrote to archive
files that haven't been accessed in over a year. i'm presently running it on my
NetWare servers since Tivoli Space Manager (HSM) doesn't support NetWare. But with a
little tweaking this script should work on a
Why don't you post it here with a descriptive title. That way it will go
into the archives for all to see in the future.
For those of you who don't know about www.adsm.org, that's where old posts
go to die. Nice search engine there and you can find pretty much anything
you want.
Kelly J. Lipp
Ditto on all counts. (Actually, I'm not sure I even have drive logs on the
unit we use (EXB-440). And it's remote, so I can't easily check that out.)
Anne Short
Lockheed Martin Enterprise Information Systems
Gaithersburg, Maryland
301-240-6184
CODA/I Storage Management
-Original Message--
I have been trying to right a macro that contains several queries.
The problem I am having is when the query doesn't return a result.
example macro:
q vol access=destroyed
q vol access=unavailable
result:
ANR2034E QUERY VOLUME: No match found using this criteria.
ANS8001I Return code 11.
ANS802
>Where is the APAR database? Thanks.
Ray - I keep factoids such as these in
http://people.bu.edu/rbs/ADSM.QuickFacts .
You can look in one of the following:
APARs, PTFs (APAR repository/APAR database):
http://service.software.ibm.com/cgi-bin/support/rs6000.support/databases
Two things, the first one being the biggie - the DB2 Admin HAS to run the
commands to have the backups expire - otherwise they stay active forever.
If you do a "show versions NODENAME /DATABASENAME" you can see all the
versions of the backups. If they all show Active, then the DBA isn't
running t
Ok, Here's a copy of my upgrade process with some notes and an added license
note for those I emailed separately. Sorry I forgot about it till just now.
I did send it to quite a few people but am sending it to the list per
Kelly's request for archive purposes
Upgrading ADSM 3.1.2.55 on AIX 4.
Richard,
Where is the APAR database? Thanks.
Richard Sims wrote:
> >ANRD Invalid condition object at 0 - magic number mismatch;
>
> Peter - Searching the APAR database for "magic number mismatch"
> turns up APAR IY14257. Have a look at that.
> You may be able to avoid if circumsta
Hi All -
We are currently considering purchasing a Qualstar TLS412. We have been
checking out messages in the newsgroups. We noticed that on the 3494
library, that some have defined certain slots to act as a load port for
checking in and out of multiple tapes.
Is this possible on the Qualstar
Ok, our problem is back! Now, it does bring the pool to 0%.
Ken and John, can you verify if we are having the same problem?
At the point when migration is not moving any data, does your CPU
Utilization go up to 100% and stay there until you raise the Migration
values?
Thanks,
Tim Rushforth
Ci
Before the upgrade, what model tape drive were you using? I currently have
3590-B11 and should I be investigating moving to an E J or K model
before/during/after the upgrade.
-Original Message-
From: Gill, Geoffrey L. [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 05, 2001 1:07 PM
To:
>Ok, our problem is back! Now, it does bring the pool to 0%.
>
>Ken and John, can you verify if we are having the same problem?
>
>At the point when migration is not moving any data, does your CPU
>Utilization go up to 100% and stay there until you raise the Migration
>values?
I have this probl
We have TSM 4.1.0 server on AIX 4.3.2.
Are there were any known problems with 2000 NT Clinet with Citrix ICA Window
client Version 6.0 installed and then installing the upgrade TSM V4.1
Client?
Thank you for your help
Dave Pearson
Production Suport Analyst
Snohimish County PUD
[EMAIL PROTECTED]
My CPU doesn't go to 100%, I have a dual, but the activity is much heavier
than normal. My second CPU is usually fairly idle, but it is around 50%
during this process, the first CPU is above 80%. After raising the
migration values, activity returns to normal, which is 0-15%.
==
I recently upgraded from 3.1.2.20 to 3.7.2.0
and notice a very annoying behaviour.
The system keeps an idle tape mounted for the full retention period
specified despite the pending mounts that are waiting.
when / where will this be fixed???
thanks ... joe.f.
Joseph A Faracchio, Systems Progra
Hi All
I'm running TSM to backup files in a Veritas Cluster running on Suns - Just test at
the moment.
The Test cluster is two machines and there are two apps which can independently
failover to either machine.
Ok so I'm running 4 schedule clients
machinea runs only on machinea
machineb runs o
I thought it always worked this way. At one time I was going to put in a
request to have two mount retention times. One for when there are no
pending request for a drive and the other for when there are pending
request.
On Mon, 5 Feb 2001, Joe Faracchio wrote:
> I recently upgraded from 3.1.2.
We also use ADSM 3.1.2.20 (for Solaris) with IBM 3494 Libraries and have
observed behavior consistent with that described by Joseph in the original email
- an idle mount will be immediately dismounted if/when there is another mount
pending and no other drive is available. However, we also recentl
Joseph, Joel, out of curiosity, is there any chance are you using EXTERNAL
library types?
I know TSM will dismount an idle volume if it needs a mountpoint in 3494's
as Kent has pointed out. I think it may behave the same way with a SCSI
library type also.
In fact, on a hunch, I just now checked
It does work that way. If a client is backing up to tape, directly or
not, keeping the mount avoids thrashing.
Steffan
Joel Fuhrman wrote:
>
> I thought it always worked this way. At one time I was going to put in a
> request to have two mount retention times. One for when there are no
> pend
I'm using ACSLS (STK). When I'm doing something like a simultaneous
migration of 3 storage pools to 2 tape drives, the behavior I observed, in
the past, is that when the first migration completes, it tape was not
unmounted until the mount retention period expires. Thus the third
migration has to
>From where I can download latest Atape driver for 3590 E11 ?
Ich bin vom 05.02.2001 bis 08.02.2001 außer Haus.
I will be out of the office from <..see above ..> until <..see above..>.
In dringenden Fällen wenden Sie sich an meine Vertreter:/
For UNIX issues please contact my colleagues:
Martin Katzenbeisser +43 1 534 01-1951
58 matches
Mail list logo
