48200028
Task: 0x1e1dd50 "vmg0"
Regards,
György Hegedus
-----Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Loon, E.J. van - SPLXM
Sent: Tuesday, August 17, 2004 3:47 PM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
Hi Györg
, August 17, 2004 13:59
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
Eric,
Thanks for your answer.
You can manage the SDG through the service port (serial port) by e.g.
HyperTerminal. While the SDG is starting you have a chance to stop the
procedure by pressing a key. Here, you get a
eters?
Regards,
Gyorgy Hegedus
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Loon, E.J. van -
SPLXM
Sent: Tuesday, August 17, 2004 10:50 AM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
Hi György!
I'm using a SAN Data Gateway, but I
Hi György!
I'm using a SAN Data Gateway, but I don't know what you mean by 'boot
parameters'. If you explain, I will let you know mine.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: György Hegedüs [mailto:[EMAIL PROTECTED]
Sent: Mon
I need help about SAN Data Gateway (in LTO 3583).
Accidentally the boot parameters were overwritten through the service port.
Can anybody tell what should be the boot parameters of SDG?
Thanks in advance.
Gyorgy Hegedus
The following information come from our TSM device drvier developer.
FOR TSM server 4.2.1.15 ( the latest fix) should contains adsmscsi.sys
version 4.2.1.17 or later
With this TSM server and device driver level
W2K customer has 2 options
1. For customer need RSM and TSM server , use IBM na
ual
Improvement"
Bill Boyer
cc:
Sent by: "ADSM: Subject: Re: 3583 with San Data Gateway
Dist Stor
Manager"
<[EMAIL PROT
Division 46
John <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 04/24/2002 11:00:45 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:[EMAIL PROTECTED]
cc:
Subject:Re: 3583 with Sa
TECTED]>
To:[EMAIL PROTECTED]
cc:
Subject:Re: 3583 with San Data Gateway
They show up a GEN_DRIVE where? The TSMSCSI devices screen on the MMC
console? OR when you DEF DRIVE them to TSM? There was an issue with the
TSMSCSI driver not recognizing the drives as LTO, but they define correctly
-5926
Fax: (240)539-7175
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
John
Sent: Wednesday, April 24, 2002 11:01 AM
To: [EMAIL PROTECTED]
Subject: Re: 3583 with San Data Gateway
Thats correct Bill
The drives show up as follows:
GEN_DRIVE \\
W2K and LTO.
Bill
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
John
Sent: Wednesday, April 24, 2002 2:01 PM
To: [EMAIL PROTECTED]
Subject: Re: 3583 with San Data Gateway
Thats correct Bill
The drives show up as follows:
GEN_DRIVE \\Tape0
GEN_DRIVE \\
and
> > \\.\Tapex. If you were using the TSMSCSI driver the drives would be
> > MTx.x.x.x format.
> >
> > Bill Boyer
> > DSS, Inc.
> >
> > -Original Message-
> > From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf
Of
> > Ant
Original Message-
> From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
> Anthony Wong
> Sent: Wednesday, April 24, 2002 12:36 PM
> To: [EMAIL PROTECTED]
> Subject: Re: 3583 with San Data Gateway
>
>
> <
> \\.\TapeX is a generic device driver
>
Wong
Sent: Wednesday, April 24, 2002 12:36 PM
To: [EMAIL PROTECTED]
Subject: Re: 3583 with San Data Gateway
<http://www.tivoli.com/support/storage_mgr/devices/magstar.html#magscsi
The following environments are not presently supported:
Removable Storage Manager (RSM) - controlled
mes Thompson <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 04/24/2002 07:38:08
AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To:[EMAIL PROTECTED]
cc:
Subject:Re: 3583 with
With the 3583 and TSM on Win2k, the drives use the IBM device driver located
at ftp://ftp.software.ibm.com/storage/devdrvr/Win2000/
Once you've installed the driver and configured the drives to use this
driver, you should be able to see the drives under the TSM Management
Console as \\.\TapeX wher
I device drive
for ALL devices(libraries) in San Data Gateway.
never use generic device driver come with windows or device FOR TSM
OPERATION UNLESS YOU ARE DOING "RESTORE local BACKUPSET FROM SDG"
Thanks and hope it help!! ^_^
Tivoli Storage Management Function Verification Test , FVT Au
TSM'ers I need help
I am trying to configure the above on an Xseries box running Win2K advanced server.
All the correct drivers have been used and all the components are at the correct
firmware levels.
All devices in the solution are connected to a 2109 S16
The problems I have encountered are
,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 17:02
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Hi again,
OK, you checked SetHost, but did you issue the DisableCC
Eric,
My AIX guy agrees with Arnaud. You didn't say whether you'd run his
step1. That may be the key. Certainly worked for us.
At 04:43 PM 2/7/2002 +0100, you wrote:
>Hi Arnaud!
>I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I
>check
t: Re: 3494 through SAN Data Gateway
Wow! I wouldn't know where to start! It's huge
I checked the /storage and /rs6000 subdirectories, but it's not there...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Denzel, Richard van [mailto:[EM
EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Wow! I wouldn't know where to start! It's huge
I checked the /storage and /rs6000 subdirectories, but it's not there...
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Denzel, Richar
ary 07, 2002 16:02
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Have you tried looking at ftp://service/software.ibm.com ??
Richard.
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 3:57 PM
To: [EMAIL PROTECT
I want to say that if you go through the San Data Gateway pages in IBM land
there is a link to that off of the documentation pages. I will look closer
in a bit but that might help.
Becky
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February
Sent: Thursday, 07 February, 2002 16:43
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Hi Arnaud!
I have issued the setHost 0,"aix" before installing the SAN Data
Gateway. I checked the Fibre Channel settings through the IBM StorWatch
SAN Data Gateway Specialist: The host
Hi Arnaud!
I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I
checked the Fibre Channel settings through the IBM StorWatch SAN Data
Gateway Specialist: The host type is set to AIX, so that shouldn't be the
cause...
Kindest regards,
Eric van Loon
KLM Royal
ax: +41 61 226 17 01 |
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 07 February, 2002 15:57
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Hi *SM-ers!
My 3590 drives
Hi *SM-ers!
My 3590 drives are working through the SAN Data Gateway now. The problem
wasn't related to the missing device package message, but it was a wrong
SCSI cable (one without a terminator).
However, I still receive the following message when running cfgmgr:
cfgmgr: 0514-621 WARNING
Have you tried looking at ftp://service/software.ibm.com ??
Richard.
-Original Message-
From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 07, 2002 3:57 PM
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
Hi *SM-ers!
My 3590 drives are
Eric,
in case Adolph's recommendation don't work, or cfgmgr gives you another
error then the problem is with your 2108 SAN Data Gateway (SDG). Go into
the SDG (SAN Data Gateway) firmware and execute the following actions:
1) disableCC
2) setHost 0, "aix" or setHost 0 AI
Hi Adolph!
Thank you very much! I will install it tomorrow.
Kindest regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: Adolph Kahan [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, February 05, 2002 18:54
To: [EMAIL PROTECTED]
Subject: Re: 3494 through SAN Data Gateway
This is part of AIX. It will be on the AIX install CDs.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Loon, E.J. van - SPLXM
Sent: Tuesday, February 05, 2002 12:41 PM
To: [EMAIL PROTECTED]
Subject: 3494 through SAN Data Gateway
Hi *SM-ers!
I
Hi *SM-ers!
I have just connected a 3494 library through a SAN Data Gateway.
When I run cfgmgr is detects the drives:
rmt5 Available 10-68-01 IBM 3590 Tape Drive and Medium Changer (FCP)
rmt6 Available 10-68-01-4,0 IBM 3590 Tape Drive and Medium Changer (FCP)
But it also returns the
The 2109-S16 is a SAN switch. You connect 2108's, devices with native fibre
support, and/or servers to the switch.
- Original Message -
From: "Jeff Bach" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 21, 2001 4:19 PM
Subject: Re: SAN Da
, 2001 4:06 PM
Subject: Re: SAN Data Gateway
The key there is you are using the router (R03) the Gateway (G07) is not
supported.
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 10:43 AM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data G
]
Subject:Re: SAN Data Gateway
Notice that you have the Routers 2108-R03 and the initial
post was for the gateway model 2108-G07.
The 2108-R03 are suppported, the 2108-G07 are not.
James Thompson
>From: "Caffey, Jeff L." <
The key there is you are using the router (R03) the Gateway (G07) is not
supported.
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 10:43 AM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
Not supported...?!?!? Ours works great!
We
I have never seen an explanation just the statement.
-Original Message-
From: Jeff Bach [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 9:47 AM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
Why?
Jeff Bach
Home Office Open Systems Engineering
Wal-Mart Stores, Inc.
WAL-MART
L PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Re: SAN Data Gateway
>Date: Mon, 21 May 2001 13:42:42 -0500
>
>Not supported...?!?!? Ours works great!
>
>We use this to connect our LTO drives to our SAN:
>IBM 2108-R03 SAN Data Gateway Routers (3)
>IBM 3584 LTO Ultrium Ultra-S
Not supported...?!?!? Ours works great!
We use this to connect our LTO drives to our SAN:
IBM 2108-R03 SAN Data Gateway Routers (3)
IBM 3584 LTO Ultrium Ultra-Scalable Tape Library (1 library w/5 SCSI drives)
McData ED-5000 Director Class Fibre Channel Switch (1)
All we had to do is create an
: SAN Data Gateway
The SAN Data Gateway does not support the LTO. According to IBM you
need the SAN Data Router.
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 7:53 AM
To: [EMAIL PROTECTED
t; <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 21, 2001 11:11 AM
Subject: SAN Data Gateway
> Hi
>
> We have a SAN Data Gateway 2108-G07 installed.
> An AIX server is connected through a brocade SAN switch to the SAN Data
> Gateway. Connected to this Gateway
The SAN Data Gateway does not support the LTO. According to IBM you
need the SAN Data Router.
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 21, 2001 7:53 AM
To: [EMAIL PROTECTED]
Subject: Re: SAN Data Gateway
I have experience with McData
01 10:12 AM
To: [EMAIL PROTECTED]
Subject: SAN Data Gateway
Hi
We have a SAN Data Gateway 2108-G07 installed.
An AIX server is connected through a brocade SAN switch to the SAN Data
Gateway. Connected to this Gateway are 4 LTO devices.
We seem to have installed the 2108-G07 ok , but nevertheless
Thanks for the mail, I am out of the office, and have
limited access to email, until May
24th but will reply to your messages as soon as I can.
Have a Great Day!!
JWS
--- Original message follows ---
Hi
We have a SAN Data Gateway 2108-G07 installed.
An AIX server is connected
Hi
We have a SAN Data Gateway 2108-G07 installed.
An AIX server is connected through a brocade SAN switch to the SAN Data
Gateway. Connected to this Gateway are 4 LTO devices.
We seem to have installed the 2108-G07 ok , but nevertheless the LTO drives
can not be "seen" from the
: Re: TSM 4.1.1, WinNT 4.0 SP6a, San Data Gateway,and IBM 3584
LTO Lib rary
"Volovsek, Jay" wrote:
>
> Jeff. I would like to sincerely thank you for that input. You were right
> on the money. When IBM configured the library, they configured it as four
> Logical Libraries. I
"Volovsek, Jay" wrote:
>
> Jeff. I would like to sincerely thank you for that input. You were right
> on the money. When IBM configured the library, they configured it as four
> Logical Libraries. I just blew away that configuration and set it up as one
> LL. Now my servers only see one libra
Very Much!!
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 4:39 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.1.1, WinNT 4.0 SP6a, San Data Gateway, and IBM 3584
LTO Lib rary
I have 3 FC connections from my TSM server (AIX) and one from each
ailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 4:39 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.1.1, WinNT 4.0 SP6a, San Data Gateway, and IBM 3584
LTO Lib rary
I have 3 FC connections from my TSM server (AIX) and one from each (3) SDG
into my McData SAN Director (ED-5000). All of tho
, Becky [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 3:18 PM
To: [EMAIL PROTECTED]
Subject:Re: TSM 4.1.1, WinNT 4.0 SP6a, San Data Gateway, and IBM
3584 LTO Lib rary
Zoning for both the San Data Gateways and the Switches will probably help
that. If there are for exampl
Zoning for both the San Data Gateways and the Switches will probably help
that. If there are for example 4 drives on a san data gateway and 2 paths
from the switch to the san data gateway then you will have 8 drives because
each path sees all 4 drives. If you then have 2 fibre adapters going
h
multiple libraries showing up, I am not sure but, rest assured, it ain't
helping. Hope this helps a little.
"Volovsek,
Jay" To: [EMAIL PROTECTED]
Subject: TSM 4.1.1, WinNT 4.0 SP6
Now I am down to 4
libraries and 4 drives. It should be 1 library and 4 drives.
-jay
-Original Message-
From: Caffey, Jeff L. [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, March 14, 2001 1:23 PM
To: [EMAIL PROTECTED]
Subject: Re: TSM 4.1.1, WinNT 4.0 SP6a, San Data Gateway, and IBM 3584
LT
Tape Drive (FCP)
That's not a problem though, because when I set up the 3584 in TSM, I set it
up to use "smc0" for the library and "rmt0, 1, 7, 8, & 14" for the
individual drives. This way, fibre channel adapter 0 runs the first SAN
Data Gateway (IBM 2108 - R03) whic
Hello all. I was wondering if anyone had this configuration? I am running
TSM 4.1.1 on a Netfinity 6000R with NT4SP6a. The server is connected to a
FC Fabric consisting of an IBM 2109-S16 FC Switch. This then connects via
longwave fibre to a SDG 2108-G07. Finally we get to attach the 4 tape
d
Hi *SM-ers!
We are trying to install TSM 4.1.2 on Windows Nt SP 6.
The Server has a Qlogic card QLA2200F which is attached to SAN Data Gateway Router
2108/R03 scsi connected to a 3583 Ultrium library.
Windows NT is able to see the SDG and the library and the drives are detected. We are
able
Hello every body:
We are trying to install TSM on Windwos NT 4 SP 6.
The server has a Q Logic card QLA2100F which is attached to a SDG connected
to a 3575 library.
Windos NT is able to see the SAN Data Gateway but the drives are not
detected.
My question is if there is any software or hardware
t; <[EMAIL PROTECTED]>@VM.MARIST.EDU> on
07/20/2000 11:51:09 AM
Any replies will be addressed to: "ADSM: Dist Stor Manager"
<[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
cc:
Subject: Re: 3575 throug SA
Hi Etienne!
Thank you very much for your suggestions.
I entered the commands you suggested through the SAN Data Gateway
Serviceport:
> disableCC
> reboot
> setHost 0,"aix"
> setHost 1,"aix"
> reboot
Afterwards, I deleted and reinstalled the SAN connected libra
x27;re reading this, who is managing your storage ??'
>From: "Loon, E.J. van - SPLXM" <[EMAIL PROTECTED]>
>Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: 3575 throug SAN Data Gateway
>Date: Thu, 20 J
61 matches
Mail list logo
