Eric,

My AIX guy agrees with Arnaud.  You didn't say whether you'd run his
step1.  That may be the key.  Certainly worked for us.


At 04:43 PM 2/7/2002 +0100, you wrote:
>Hi Arnaud!
>I have issued the setHost 0,"aix" before installing the SAN Data Gateway. I
>checked the Fibre Channel settings through the IBM StorWatch SAN Data
>Gateway Specialist: The host type is set to AIX, so that shouldn't be the
>cause...
>Kindest regards,
>Eric van Loon
>KLM Royal Dutch Airlines
>
>
>-----Original Message-----
>From: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, February 07, 2002 16:07
>To: [EMAIL PROTECTED]
>Subject: Re: 3494 through SAN Data Gateway
>
>
>Hi Mr Loon,
>
>I could be false, be I believe I remember we had the same problem, until
>we updated values in the SDG, as said before :
>1) disableCC
>2) setHost 0, "aix"   or   setHost  0  AIX
>3) setHost 1, "aix"   or   setHost  1  AIX
>4) and reboot the device.
>5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl
>fcs?), and then rerun cfgmgr.
>
>
>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>| Arnaud Brion, Panalpina Management Ltd., IT Group     |
>| Viaduktstrasse 42, P.O. Box, 4002 Basel - Switzerland |
>| Phone: +41 61 226 19 78 / Fax: +41 61 226 17 01       |
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
>
>
>
>-----Original Message-----
>From: Loon, E.J. van - SPLXM [mailto:[EMAIL PROTECTED]]
>Sent: Thursday, 07 February, 2002 15:57
>To: [EMAIL PROTECTED]
>Subject: Re: 3494 through SAN Data Gateway
>
>
>Hi *SM-ers!
>My 3590 drives are working through the SAN Data Gateway now. The problem
>wasn't related to the missing device package message, but it was a wrong
>SCSI cable (one without a terminator). However, I still receive the
>following message when running cfgmgr:
>
>cfgmgr: 0514-621 WARNING: The following device packages are required for
>device support but are not currently installed. devices.fcp.array
>
>I checked the AIX 4.3.3. CD, but it's not part of AIX. Could someone who
>is using a SAN Data Gateway check if he/she has this fileset installed?
>Maybe it is part of another fileset? I can't find anything about it, not
>through IBM nor though Google. Thanks in advance! Kindest regards, Eric
>van Loon KLM Royal Dutch Airlines
>
>
>-----Original Message-----
>From: Othonas Xixis [mailto:[EMAIL PROTECTED]]
>Sent: Tuesday, February 05, 2002 19:47
>To: [EMAIL PROTECTED]
>Subject: Re: 3494 through SAN Data Gateway
>
>
>Eric,
>in case Adolph's recommendation don't work, or cfgmgr gives you another
>error then the problem is with your 2108 SAN Data Gateway (SDG). Go into
>the SDG (SAN Data Gateway) firmware and execute the following actions:
>1) disableCC
>2) setHost 0, "aix"   or   setHost  0  AIX
>3) setHost 1, "aix"   or   setHost  1  AIX
>4) and reboot the device.
>5) remove the tape drives (rmdev -dl rmt?), the fiber object (rmdev -Rdl
>fcs?), and then rerun cfgmgr. This action should let see the SDG
>transparent to the cfgmgr routine.
>
>Cheers.
>
>Othonas Xixis
>
>
>
>"Loon, E.J. van - SPLXM" <[EMAIL PROTECTED]>@VM.MARIST.EDU> on
>02/05/2002 01:00:33 PM
>
>Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>
>Sent by:    "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>
>
>To:    [EMAIL PROTECTED]
>cc:
>Subject:    Re: 3494 through SAN Data Gateway
>
>
>
>Hi Adolph!
>Thank you very much! I will install it tomorrow.
>Kindest regards,
>Eric van Loon
>KLM Royal Dutch Airlines
>
>
>-----Original Message-----
>From: Adolph Kahan [mailto:[EMAIL PROTECTED]]
>Sent: Tuesday, February 05, 2002 18:54
>To: [EMAIL PROTECTED]
>Subject: Re: 3494 through SAN Data Gateway
>
>
>This is part of AIX. It will be on the AIX install CDs.
>
>-----Original Message-----
>From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
>Loon, E.J. van - SPLXM
>Sent: Tuesday, February 05, 2002 12:41 PM
>To: [EMAIL PROTECTED]
>Subject: 3494 through SAN Data Gateway
>
>Hi *SM-ers!
>I have just connected a 3494 library through a SAN Data Gateway. When I
>run cfgmgr is detects the drives:
>
>rmt5  Available 10-68-01     IBM 3590 Tape Drive and Medium Changer
>(FCP)
>rmt6  Available 10-68-01-4,0 IBM 3590 Tape Drive and Medium Changer
>(FCP)
>
>But it also returns the following error:
>
>cfgmgr: 0514-621 WARNING: The following device packages are required for
>device support but are not currently installed. devices.fcp.array
>
>This driver, is it a AIX driver or is it part of the TSM devices
>package? Thanks in advance!! Kindest regards, Eric van Loon KLM Royal
>Dutch Airlines
>
>
>**********************************************************************
>For information, services and offers, please visit our web site:
>http://www.klm.com. This e-mail and any attachment may contain
>confidential and privileged material intended for the addressee only. If
>you are not the addressee, you are notified that no part of the e-mail
>or any attachment may be disclosed, copied or distributed, and that any
>other action related to this e-mail or attachment is strictly
>prohibited, and may be unlawful. If you have received this e-mail by
>error, please notify the sender immediately by return e-mail, and delete
>this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its
>subsidiaries and/or its employees shall not be liable for the incorrect
>or incomplete transmission of this e-mail or any attachments, nor
>responsible for any delay in receipt.
>**********************************************************************

Reply via email to