Hello,
our 3583 Library has a lot of problems (but with the robot not with the
drives!). We also have an old (but working) 4560SLX library with LTO1
drives. Is it possible to remove the LTO2 drives from the 3583 and put them
into the 4560SLX? Is that possible?
Kind regards,
Stephan
espond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Sharing a 3583 library
On 27/07/2007, at 1:43 AM, Zoltan Forray/AC/VCU wrote:
> Thanks for the reply. I already have things configured like this.
>
> What I was hoping for was zOS/MVS sysp
On 27/07/2007, at 1:43 AM, Zoltan Forray/AC/VCU wrote:
Thanks for the reply. I already have things configured like this.
What I was hoping for was zOS/MVS sysplex sharing smarts (for you
mainframe folks). With a properly configured sysplex, the drives are
configured and online to all systems a
Sent by: "ADSM: Dist Stor Manager"
07/26/2007 11:33 AM
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L@VM.MARIST.EDU
cc
Subject
Re: [ADSM-L] Sharing a 3583 library
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Zoltan Forray/AC/VCU
> I
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Zoltan Forray/AC/VCU
> I have never shared a 3583 library and drives between multiple TSM
servers
> that will act as library managers/owners. I have only done this with
my
> 3494.
>
> Is there anything spec
I have never shared a 3583 library and drives between multiple TSM servers
that will act as library managers/owners. I have only done this with my
3494.
Is there anything special about how I should configure a second TSM server
that I want to take control over a 3583 library ? Is it basically
AH !!
I see the problem
Becaurce of the elephant, the picker can't reach bulk i/o...
So _don't put the elephant back_ !!
:-)
Maurice
- Original Message -
From: "Markus Engelhard" <[EMAIL PROTECTED]>
To:
Sent: Friday, September 16, 2005 8:05 AM
Subject:
tapes as whatever you
need with TSM)
Regards,
Markus
-Original Message-
From: Meadows, Andrew <[EMAIL PROTECTED]>
To: 'ADSM-L@VM.MARIST.EDU'
Sent: Wed Sep 14 21:31:21 2005
Subject: 3583 library
Config
Tsm server version 5.3
Windows 2003 server
3583 IBM library using tsm driv
Does the library know that you have a bulk i/o?
Maybe you have to check the settings
- Original Message -
From: "Meadows, Andrew" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 15, 2005 1:50 PM
Subject: Re: [ADSM-L] 3583 library
> That's just the proble
y use search=yes if the tapes are allready in the library
search=bulk searches the bulk-i/o
Regards,
Maurice
- Original Message -
From: "Scott, Mark William" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 15, 2005 6:19 AM
Subject: Re: [ADSM-L] 3583 library
Hi A
Only use search=yes if the tapes are allready in the library
search=bulk searches the bulk-i/o
Regards,
Maurice
- Original Message -
From: "Scott, Mark William" <[EMAIL PROTECTED]>
To:
Sent: Thursday, September 15, 2005 6:19 AM
Subject: Re: [ADSM-L] 3583 lib
this helps
Regards Mark
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Meadows, Andrew
Sent: Thursday, 15 September 2005 12:08 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: 3583 library
As a side note all firmware has been upgraded regularly in the past 2
As a side note all firmware has been upgraded regularly in the past 2 years. No
help from firmware change..
-Original Message-
From: Meadows, Andrew <[EMAIL PROTECTED]>
To: 'ADSM-L@VM.MARIST.EDU'
Sent: Wed Sep 14 21:31:21 2005
Subject: 3583 library
Config
Tsm server ver
Config
Tsm server version 5.3
Windows 2003 server
3583 IBM library using tsm driver connected via SCSI
Does anyone have a similar config? And if so do you have issues with label
scratch search=bulk. I am currently having to connect to the library web page
and import the tapes, and do a label sc
EMAIL PROTECTED]
Subject: Re: Upgrading an IBM 3583 library...the 'enterprise' license
Hi
Yes, having 40 slots will require you to purchase the TSM EE license.
Wether or not you use the slots is irrelevant. You are charged for the
size of the library, not the amount of slots you're
>> In which case
does TSM care how many slots I have at all, and will TSM charge for
extra
license unless we tell them?<<
IBM only charges you for what you tell them you are licensing. But if
you cheat, that raises the cost to the rest of us.
David
nd to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Re: Upgrading an IBM 3583 library...the 'enterprise' license
I think that is a question that only your sales rep could answer. And if
they told me I could get buy wity only usi
s those slots.
Payment is for the LTO library not for the TSM License though.
Not sure if that helped.
Ta,
Alexandra
-Original Message-
From: Keith Demings [mailto:[EMAIL PROTECTED]
Sent: Thursday, 21 October 2004 2:29 AM
To: [EMAIL PROTECTED]
Subject: Upgrading an IBM 3583 library..
e-
From: David E Ehresman [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 21, 2004 8:31 AM
To: [EMAIL PROTECTED]
Subject: Re: Upgrading an IBM 3583 library...the 'enterprise' license
I think that is a question that only your sales rep could answer. And if
they told me I could get bu
library a couple more slots,
and have run into the ever popular 'enterprise' 40 slot dilemma.
We currently have a IBM 3583 library with 2 lto1 drives and 2
columns installed (36 slots) Running TSM 5.1.92.
Question I have is, can we just get another column (18 slots)
and on
500, Keith Demings
<[EMAIL PROTECTED]> wrote:
>G'day all
>
>We are looking into expanding the library a couple more slots, and have run
> into the ever popular 'enterprise' 40 slot dilemma.
>We currently have a IBM 3583 library with 2 lto1 drives
G'day all
We are looking into expanding the library a couple more slots, and have run
into the ever popular 'enterprise' 40 slot dilemma.
We currently have a IBM 3583 library with 2 lto1 drives and 2 columns
installed (36 slots) Running TSM 5.1.92.
Drive is online?
Path is online?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of tani
Sent: Tuesday, October 19, 2004 11:09 AM
To: [EMAIL PROTECTED]
Subject: 3583 library problem
Hi all,
My 3583 library don't work today when i execute
backup
Solved.
it was a problem in the definition of the route to the drive in
tivoli.By some reason tivoli change the state of the drive to nonactive.
Recently i update the maintenance level in aix maybe this was the problem.
Thanks Pawel.
Pawel Wozniczka wrote:
>>The library always work perfectly a
CTED]
Subject: Re: 3583 library problem
But, i think that tivoli does not recommend to define more mount points of the number
of drives present in the library
Thanks Amhouche Youssef
AMHOUCHE Youssef wrote:
>I think you need to make more mount point available by increasing the
>mount l
>The library always work perfectly and the configuration in tivoli is ok.
>The number of drives is 1 and the mount limit is set to one.
>Any ideas?
Hello
Execute "q path" and/or "q drive" command and check whether all related
devices are online.
What is the platform where TSM is installed on ?
;origine-
>De : ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] la part de
>tani
>Envoyé : mardi 19 octobre 2004 09:09
>À : [EMAIL PROTECTED]
>Objet : 3583 library problem
>
>
>Hi all,
>My 3583 library don't work today when i execute
>backup db t=f devclass=3583_
>>>>
I think you need to make more mount point available by increasing the mount
limit value
-Message d'origine-
De : ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] la part de
tani
Envoyé : mardi 19 octobre 2004 09:09
À : [EMAIL PROTECTED]
Objet : 3583 library problem
Hi all,
My 3583 library don't work today when i execute
backup db t=f devclass=3583_MGC, tivoli give me this message:
ANR4571E Database backup/restore terminated - = insufficient
number of mount points available for removable media.
The library always work perfectly and the configurati
kind of behaviour is exhibited ?
"CORP Rick Willmore" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
27/09/2004 18:42
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Re
uot;ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
restore files use only 1 drive on my IBM 3583 library
Hi all
I'm restoring a lot of files ... is there a way to tell TSM to use more
than on drive for the restore ..
I have a IBM 3583 with 6 drives
thanks
Luc
AM
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
restore files use only 1 drive on my IBM 3583 library
Hi all
I'm restoring a lot of files ... is there a way to tell TSM to use more
than on drive for the restore ..
I have a IBM 3583 with 6 drives
thanks
Luc
Hi all
I'm restoring a lot of files ... is there a way to tell TSM to use more
than on drive for the restore ..
I have a IBM 3583 with 6 drives
thanks
Luc
ailto:[EMAIL PROTECTED]
Sent: April 7, 2004 10:22 AM
To: [EMAIL PROTECTED]
Subject: Help needed to free slots in a 3583 library
Hi all,
I have a query regarding tape usage:
Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform
backing up appx. 50 nodes to 2 disk pools and
t: Re: Help needed to free slots in a 3583 library
I was in your same boat. It sucks.
We have since turned colocation off since we're more of a backup shop, not
into tons of restores. Also, we will leave the DRM tapes in the library to
get filled more rather than sending them offsite every
To: [EMAIL PROTECTED]
Subject: Help needed to free slots in a 3583 library
Hi all,
I have a query regarding tape usage:
Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform
backing up appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in
a 3583 library, one copy
-Original Message-
From: Copperfield Adams [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 07, 2004 11:22 AM
To: [EMAIL PROTECTED]
Subject: Help needed to free slots in a 3583 library
Hi all,
I have a query regarding tape usage:
Analysis: We currently have TSM 5.2 installed on a WIN2k
: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Copperfield Adams
Sent: Wednesday, April 07, 2004 9:22 AM
To: [EMAIL PROTECTED]
Subject: Help needed to free slots in a 3583 library
Hi all,
I have a query regarding tape usage:
Analysis: We currently have TSM 5.2 installed on a WIN2k S
Hi all,
I have a query regarding tape usage:
Analysis: We currently have TSM 5.2 installed on a WIN2k Server platform backing up
appx. 50 nodes to 2 disk pools and then migrating to LTO tapes in a 3583 library, one
copy for offsite vault and one copy to remain onsite within the tape library
/18/2004 02:29 PM
-
Desalegne T Guangul
03/17/2004 05:58 PM
To: [EMAIL PROTECTED]
cc:
Subject:3583 Library problem
Hi Guys,
I'm using Storage management server version 5.1.6.0 on windows 2000
advanced server and Tape Library IBM LTO 3583-L18 wit
...
>SENSE=70.00.04.00.00.00.00.0A.00.00.00.00.40.C0.81.00.00 ...
FYI, there is a helpful PDF available at
http://www-1.ibm.com/support/entdocview.wss?uid=swg21063859
(registration required) titled
"Tivoli Storage Problem Determination Guide - Understanding Sense Data".
Richard Sims
ch 17, 2004 8:58 PM
To: [EMAIL PROTECTED]
Subject: 3583 Library problem
Hi Guys,
I'm using Storage management server version 5.1.6.0 on windows 2000
advanced server and Tape Library IBM LTO 3583-L18 with two drives. Once
every two weeks I get the following error and nothing get backup to the
t
. Rev B
is the fix for that, contact your ibm service center to have them
replaced.
Regards,
Vincent
-Original Message-
From: Desalegne Guangul [mailto:[EMAIL PROTECTED]
Sent: Thursday, March 18, 2004 2:58 AM
To: [EMAIL PROTECTED]
Subject: 3583 Library problem
Hi Guys,
I'm usi
.
- Forwarded by Orville Lantto/Datatrend on 03/17/04 10:40 PM -
Orville Lantto
03/17/04 10:38 PM
To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
cc:
Subject: Re: 3583 Library problem
Try having the robot recalcitrate, either through the web GUI or
[EMAIL PROTECTED]
cc:
Subject:3583 Library problem
Hi Guys,
I'm using Storage management server version 5.1.6.0 on windows 2000
advanced server and Tape Library IBM LTO 3583-L18 with two drives. Once
every two weeks I get the following error and nothing get backup to
Hi Guys,
I'm using Storage management server version 5.1.6.0 on windows 2000
advanced server and Tape Library IBM LTO 3583-L18 with two drives. Once
every two weeks I get the following error and nothing get backup to the
tapes. The error on the Library shows SAC 8100 and on q actlog has the
fo
Reporting back in case anyone else runs into this problem:
If you are installing a new LTO1 drive in an existing 3583 library (prior to
about 10/2003), it's a customer install and you should just be able to throw
it in, right?
Wrong!
The newer 3583 libraries have a "multipath"
[mailto:[EMAIL PROTECTED]
Sent: Tuesday, January 20, 2004 5:27 PM
To: [EMAIL PROTECTED]
Subject: New drive in TSM 3583 library - set SCSI ID (NOT)
Trying to add a third LTO1 drive to a 3583 library attached to Windows TSM
server.
3583 is about 9 months old, does not have the "multipath" fe
Hot Diggety! Prather, Wanda was rumored to have written:
>
> You can go to www.storage.ibm.com and download the
> latest 3583 or LTO firmware any time.
> But it doesn't tell me what's CHANGED in each level of firmware.
The local IBM CE usually is able to get something for me if I make a
request
This may be slightly off topic, but I know there are a lot of 3583 users in
TSM land.
You can go to www.storage.ibm.com and download the
latest 3583 or LTO firmware any time.
But it doesn't tell me what's CHANGED in each level of firmware.
Anybody know where to find the change history for
3583
Trying to add a third LTO1 drive to a 3583 library attached to Windows TSM
server.
3583 is about 9 months old, does not have the "multipath" feature.
The library "sees" there is another drive, but won't let me set the SCSI id.
The LED panel LOOKS like it takes the SC
TED]>
Enviado por:"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Destinatarios:[EMAIL PROTECTED]
CC:
Asunto: Re: Firmware upgrade on 3583 library
I just know if you call IBM for support they want you on the 'latest'
before
they will even talk with yo
To: [EMAIL PROTECTED]
Subject: Firmware upgrade on 3583 library
[snip]
I cannot find any definitive information regarding firmware revisions on
3583 libraries running on TSM 4.2.3.0 on AIX 3.4. Is there a particular
revision of firmware which needs to be loaded, or can I load the latest
firmware that I
Guys and gals,
I cannot find any definitive information regarding firmware revisions on
3583 libraries running on TSM 4.2.3.0 on AIX 3.4. Is there a particular
revision of firmware which needs to be loaded, or can I load the latest
firmware that I can lay my hands on (this is for the library and L
most of those problems we had on 3583 library were due to magazines. after
firmware upgrade and
changing of magazines to "Revision B" everything went ok.
regards,
Burak Demircan
CEO / ITT
MERCEDES-BENZ TURK A.S.
[EMAIL PROTECTED]
tel:+90 212 482 35 00 (4676)
fax :+90 212
On Thu, Dec 12, 2002 at 12:01:11PM +0100, Lars Bebensee wrote:
> Not at all. The devices just have to be reset, ie you do a "rmdev -l"
> followed by a "mkdev -l" for the appropriate devices. After, you should
> confirm with "lscfg -v -l" that the new firmware level is correct.
Thanks everybody fo
On Thu, Dec 12, 2002 at 12:23:44PM +0200, Zlatko Krastev/ACIT wrote:
[rmdev/delete drive/delete library on firmware update]
> It ought to be not necessary. Do you have any problem?
We are currently doing an initial DR-test, and received an RS/6000 and 3584
library with four drives to do
Hi,
Not at all. The devices just have to be reset, ie you do a "rmdev -l"
followed by a "mkdev -l" for the appropriate devices. After, you should
confirm with "lscfg -v -l" that the new firmware level is correct.
Bye Lars
On 12.12.2002 11:21:38 "ADSM: Dist Stor Manager" wrote:
> Hello everybody
3583 library and 3580
drives
Hello everybody,
When you upgrade the firmware in your drive and/or library, is it necessary
to (under AIX) 'rmdev -dl' the library and drives and (in TSM) 'delete
drive' and 'delete library' after updating the firmware?
The drives
[EMAIL PROTECTED]
cc:
Subject: Upgrading firmware on 3583 library and 3580 drives
Hello everybody,
When you upgrade the firmware in your drive and/or library, is it
necessary
to (under AIX) 'rmdev -dl' the library and drives and (in TSM) 'delete
drive' and '
Hello everybody,
When you upgrade the firmware in your drive and/or library, is it necessary
to (under AIX) 'rmdev -dl' the library and drives and (in TSM) 'delete
drive' and 'delete library' after updating the firmware?
The drives went from 22T4 to 25D4 and the library went from 2.72.0012 to
2.8
t: Problems with 3583 Library
Dist Stor
Manager"
<[EMAIL PROTECTED]
T.EDU>
11/15/2002 09:32
AM
Please respond
2-660-2336
-Original Message-
From: Anwer Adil [mailto:aadil@;LAW.COLUMBIA.EDU]
Sent: Friday, November 15, 2002 11:32 AM
To: [EMAIL PROTECTED]
Subject: Problems with 3583 Library
I am going nuts here.
I have been having lots of problems with this library since day one. Two of
the th
-298-3568
1-800-PAGE-MCI#1376812
-Original Message-
From: Anwer Adil [mailto:aadil@;LAW.COLUMBIA.EDU]
Sent: Friday, November 15, 2002 11:32 AM
To: [EMAIL PROTECTED]
Subject: Problems with 3583 Library
I am going nuts here.
I have been having lots of problems with this library since
I am still getting I/O errors
on those drives. The third drive is working fine. It can read the volumes
that were previously marked as being unavailable by the other drives.
Has anyone else experience such problems with the IBM 3583 library? All the
drives and the library have the latest firmware.
Anwer
No, i still could check in a cleaningtape and do a clean drive libname
drivename with success.
so this should still work, as i would like to see tsm doing the cleaning
instead of a piece of hardware which chooses for itselfs.
greetings
Peter
"this one is for setting the autoclean function on s
"this one is for setting the autoclean function on so you get an extra slot
free in your library"
Is THAT why I can't check in a cleaning tape since we updated the
firmware?
3583 on TSM 4.1.5.0 on AIX 4.3.3 ML8 Atape 7.1.5.0
Tab Trepagnier
TSM Administrator
Laitram Corporation
Hello everyone,
Before you update your firmware of your 3583 library read this:
Library code: V2_80_41.lif
There are two important issues here, one is the length of the barcode. When
you apply this firmware, the standard length is set to 6 characters. So a
label as 01L1 will be seen as
diots"
" Yes this space can be rented "
@ Multi_lul_advertisment_multi_media_systems
>From: Kurt Beyers <[EMAIL PROTECTED]>
>Reply-To: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: add drives in IBM 3
EMAIL PROTECTED]]
Sent: Tuesday, 12 February, 2002 9:54
To: [EMAIL PROTECTED]
Subject: add drives in IBM 3583 library
Hi everybody,
I'll be upgrading our IBM 3583 library (add a thirth drive and a few
more slots).
We've ordered the advanced managed library feature (three drives in
total), bu
l Message-
From: Kurt Beyers [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 12 February, 2002 9:54
To: [EMAIL PROTECTED]
Subject: add drives in IBM 3583 library
Hi everybody,
I'll be upgrading our IBM 3583 library (add a thirth drive and a few
more slots).
We've ordered the advanced ma
Hi everybody,
I'll be upgrading our IBM 3583 library (add a thirth drive and a few more slots).
We've ordered the advanced managed library feature (three drives in total), but
I'm wondering how I need to register this license, is it just the following line (we
only have 1 libra
TSM Administrator
Laitram Corporation
Neil Sharp <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 02/07/2002 05:03:29 AM
Please respond to "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To: [EMAIL PRO
Hello,
I want to install and configure a IBM 3583 LTO tape library for use with
TSM, but how to do ?
1) There is a W2K Backupserver with TSM 4.2
2) A SCSI connected 3583 tape library with two LTO drives.
**
my questions are:
Which device driver should I install ? The package IBMUltrium
Technology, Inc
bbullock
cc:
Sent by: "ADSM: Subject: IBM 3583 Library question.
Dist Stor
Manager"
<[EM
Subject: Re: IBM 3583 Library question.
Dist Stor
Manager"
<[EMAIL PROTECTED]
T.EDU>
07/02/2002 06:11
Please respond
defer to rest if they have a better answer.
-Original Message-
From: bbullock [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, February 06, 2002 4:16 PM
To: [EMAIL PROTECTED]
Subject: IBM 3583 Library question.
We are hooking a new IBM 3583 tape library up to a Solaris
host to
We are hooking a new IBM 3583 tape library up to a Solaris
host to be a remote site TSM server. The Ultrium drives have various
/dev/?st... devices through which we can access them. The no-brainer was to
use the driver that tells the drive to compress the data, but I'm not sure
be
Hello everybody,
My environment is currently the following:
TSM Server 4.1.4.0 on Windows 2000 Server
IBM 3583 library with two LTO drives and 24 slots
We will be upgrading the library by adding two more drives and 12 extra slots (hence 4
drives and 36 slots in total).
The website of TSM
It is fully supported.
- Original Message -
From: "Jacques Butcher" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 10, 2001 5:48 PM
Subject: Does TSM 4.2 support an IBM 3583 library (6 drives)
> It's not on the devices supported Web Site. Please help!!!
>
It's not on the devices supported Web Site. Please help!!!
a licensing feature. You get the same code ship.
Adolph
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED]] On Behalf Of
Jacques Butcher
Sent: Monday, September 10, 2001 11:48 AM
To: [EMAIL PROTECTED]
Subject: Does TSM 4.2 support an IBM 3583 library (6 drives
> -Původní zpráva-
> Od: Rosetti, Bill [SMTP:[EMAIL PROTECTED]]
> Odesláno: 18. dubna 2001 22:54
> Komu: [EMAIL PROTECTED]
> Předmět: Re: TSM 4.1.3 on AIX and LTO 3583 Library problem
>
> Have you tried to control the robot using tapeutil that comes on the
> d
> >Now when I use TSM command CHECKIN LIBVOLUME, result was that all volumes in
> >library was labelled, but every volume generate message:
> > ANR8311E An I/O error occurred while accessing drive LTODRV1 (/dev/rmt0) for
> > READ operation, errno = 5
This is normal when labelling new tap
Manager [mailto:[EMAIL PROTECTED]]On Behalf Of
Hrouda Tomáš
Sent: Wednesday, April 18, 2001 1:36 AM
To: [EMAIL PROTECTED]
Subject: TSM 4.1.3 on AIX and LTO 3583 Library problem
I have trouble with LTO 3583 library and TSM 4.1.3 in AIX 4.3.3.
I installed the device driver for 3583 drive and library to
áva-
> Od: Suad Musovich [SMTP:[EMAIL PROTECTED]]
> Odesláno: 18. dubna 2001 12:13
> Komu: [EMAIL PROTECTED]
> Předmět: Re: TSM 4.1.3 on AIX and LTO 3583 Library problem
>
> Can you run a "q devc","q libr" and a "q dr" to see how you defined t
>I have trouble with LTO 3583 library and TSM 4.1.3 in AIX 4.3.3.
>
>I installed the device driver for 3583 drive and library to AIX system (from
>original install CD) and try to configure it with TSM 4.1.3. In AIX system
>appears this device like /dev/rmt0 (drive) and /dev/
Can you run a "q devc","q libr" and a "q dr" to see how you defined them?
Suad
--
On Wed, Apr 18, 2001 at 11:36:10AM +0200, Hrouda Tomá¹ wrote:
> I have trouble with LTO 3583 library and TSM 4.1.3 in AIX 4.3.3.
>
> I installed the device driver for 358
I have trouble with LTO 3583 library and TSM 4.1.3 in AIX 4.3.3.
I installed the device driver for 3583 drive and library to AIX system (from
original install CD) and try to configure it with TSM 4.1.3. In AIX system
appears this device like /dev/rmt0 (drive) and /dev/smc0 (robot). I decide
to
good copies.
Please reply if there are still problems after doing this.
=
I tried to configure a 3583 library on a WIN2K TSM server :
I followed the documentation and readme documentation and entered :
The dri
I haven't seen this exact problem, but can give you some usual NT/W2K
stuff. Did you logout/login after the install? Were there any enviorment
variables to set, and did you logout/login after setting them? (Maybe even
recycle the machine) Does that DLL exist? Is it in the right place? How
ab
I tried to configure a 3583 library on a WIN2K TSM server :
I followed the documentation and readme documentation and entered :
The driver installed is the last one : 5.1.0.8 - Device is seen by
Windows 2000
DEFINE LIBRARY LIB3583 LIBTYPE=RSM MEDIATYPE="LTO Ultrium"
and I get the
92 matches
Mail list logo
